From: Tom Zanussi <tom.zanussi@intel.com>
To: James Abernathy <jfabernathy@gmail.com>
Cc: "yocto@yoctoproject.org" <yocto@yoctoproject.org>
Subject: Re: build failure on crownbay with EMGD
Date: Wed, 09 Nov 2011 13:43:04 -0600 [thread overview]
Message-ID: <1320867784.16608.49.camel@elmorro> (raw)
In-Reply-To: <CANFv2E=oMsvLPB--ixZg5W2_h3W3-fYR+rM=sfePo_EMXir2KA@mail.gmail.com>
On Wed, 2011-11-09 at 10:24 -0800, James Abernathy wrote:
>
>
> On Wed, Nov 9, 2011 at 12:56 PM, James Abernathy
> <jfabernathy@gmail.com> wrote:
>
>
> On Wed, Nov 9, 2011 at 12:51 PM, Tom Zanussi
> <tom.zanussi@intel.com> wrote:
> On Wed, 2011-11-09 at 09:41 -0800, James Abernathy
> wrote:
> > In the past I've built the crownbay-noemgd
> successfully, using the
> > Development Manual Appendix A corrected instructions
> that have been
> > patched. I thought I'd try my hand at building the
> crownbay with EMGD
> > this time. Following the instructions in the
> Appendix A, but using
> > the opposite instructions related to EMGD, plus
> installing EMGD per
> > the instructions in the README file in the
> meta-crownbay directory, I
> > got a long way into the build, but failed toward the
> end in what looks
> > like a dependance issue. Can someone spot what I
> need to change???
> >
>
>
> Yes, you've hit the missing step added to the update
> release notes here:
>
> http://www.yoctoproject.org/download/bsp/intel-atom-processor-e660-intel-platform-controller-hub-eg20t-development-kit-1
>
>
> 7. Remove the following unused file from the emgd
> binaries in order to
> avoid a packaging error at build-time:
> $ rm
> meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so
>
>
> This was an omission in the README, queued for the
> next edison point
> release.
>
> If I remember my MeeGo stuff, then removing this file will
> eliminate the ability to do Media decode acceleration??
>
>
> Not sure what it takes to get past this error. Just removing the file
> and rerunning bitbake gets the same error. Do I need
> to reset something before rerunning???
>
You should bump the PR of emgd-driver-bin_1.8.bb to get it to use the
new contents i.e.
change
PR = "r7"
to
PR = "r8"
Tom
> Jim A
>
> Tom
>
> > NOTE: Running noexec task 4432 of 4436 (ID:
> >
> 715, /home/jim/poky/meta/recipes-kernel/linux/linux-yocto_3.0.bb,
> > do_package_write)
> > NOTE: package eglibc-locale-2.13-r16: task
> do_package_write_rpm:
> > Succeeded
> > NOTE: Running task 4433 of 4436 (ID:
> >
> 8, /home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> > do_rootfs)
> > NOTE: Running noexec task 4434 of 4436 (ID:
> >
> 260, /home/jim/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
> > do_package_write)
> > NOTE: package core-image-sato-1.0-r0: task
> do_rootfs: Started
> > ERROR: Function 'do_rootfs' failed
> >
> (see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> > ERROR: Logfile of failure stored
> >
> in: /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608
> > Log data follows:
> > | Generating solve db
> > for /home/jim/poky/build/tmp/deploy/rpm/mymachine...
> > | total: 1 0.000000 MB
> 1.251276 secs
> > | fingerprint: 1179 0.007580 MB
> 0.225419 secs
> > | install: 393 0.000000 MB
> 0.467978 secs
> > | dbadd: 393 0.000000 MB
> 0.458049 secs
> > | dbget: 2413 0.000000 MB
> 0.002657 secs
> > | dbput: 393 1.816904 MB
> 0.387933 secs
> > | readhdr: 3931 3.623312 MB
> 0.007842 secs
> > | hdrload: 1965 5.352088 MB
> 0.015769 secs
> > | hdrget: 67287 0.000000 MB
> 0.025251 secs
> > | Generating solve db
> for /home/jim/poky/build/tmp/deploy/rpm/core2...
> > | total: 1 0.000000 MB
> 30.690842 secs
> > | fingerprint: 16377 0.192190 MB
> 1.357263 secs
> > | install: 5459 0.000000 MB
> 9.185276 secs
> > | dbadd: 5459 0.000000 MB
> 8.997421 secs
> > | dbget: 61190 0.000000 MB
> 0.097393 secs
> > | dbput: 5459 27.436448 MB
> 8.057184 secs
> > | readhdr: 54591 55.326554 MB
> 0.216373 secs
> > | hdrload: 27777 84.106654 MB
> 0.241450 secs
> > | hdrget: 982855 0.000000 MB
> 0.367838 secs
> > | Generating solve db
> for /home/jim/poky/build/tmp/deploy/rpm/all...
> > | total: 1 0.000000 MB
> 0.123502 secs
> > | fingerprint: 96 0.003258 MB
> 0.004244 secs
> > | install: 32 0.000000 MB
> 0.065233 secs
> > | dbadd: 32 0.000000 MB
> 0.062755 secs
> > | dbget: 585 0.000000 MB
> 0.000230 secs
> > | dbput: 32 0.259492 MB
> 0.039171 secs
> > | readhdr: 321 0.520536 MB
> 0.000570 secs
> > | hdrload: 160 0.772764 MB
> 0.001263 secs
> > | hdrget: 5288 0.000000 MB
> 0.002207 secs
> > | Generating solve db
> for /home/jim/poky/build/tmp/deploy/rpm/all...
> > | total: 1 0.000000 MB
> 0.111927 secs
> > | fingerprint: 96 0.003258 MB
> 0.004173 secs
> > | install: 32 0.000000 MB
> 0.057706 secs
> > | dbadd: 32 0.000000 MB
> 0.055191 secs
> > | dbget: 585 0.000000 MB
> 0.000204 secs
> > | dbput: 32 0.259492 MB
> 0.034089 secs
> > | readhdr: 321 0.520536 MB
> 0.000673 secs
> > | hdrload: 160 0.772764 MB
> 0.001158 secs
> > | hdrget: 5288 0.000000 MB
> 0.001854 secs
> > | Processing locale-base-en-us...
> > | Processing locale-base-en-gb...
> > | Processing task-core-boot...
> > | Processing task-core-apps-console...
> > | Processing task-core-ssh-dropbear...
> > | Processing task-core-apps-x11-pimlico...
> > | Processing task-core-x11-sato...
> > | Processing zypper...
> > | Processing task-core-x11-base...
> > | Processing task-core-apps-x11-games...
> > | Processing task-core-apps-x11-core...
> > | Processing task-base-extended...
> > | Processing rpm...
> > | error: Failed dependencies:
> > | libva.so.1 is needed by libegl1-1.8-r7.core2
> > | ERROR: Function 'do_rootfs' failed
> >
> (see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> > NOTE: package core-image-sato-1.0-r0: task
> do_rootfs: Failed
> > ERROR: Task 8
> >
> (/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> > do_rootfs) failed with exit code '1'
> > ERROR:
> '/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb'
> > failed
> > jim@jim-ubuntu:~/poky/build$
> >
> >
>
>
>
>
>
next prev parent reply other threads:[~2011-11-09 19:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-09 17:41 build failure on crownbay with EMGD James Abernathy
2011-11-09 17:51 ` Tom Zanussi
2011-11-09 17:56 ` James Abernathy
2011-11-09 18:24 ` James Abernathy
2011-11-09 19:43 ` Tom Zanussi [this message]
2011-11-09 20:03 ` James Abernathy
2011-11-09 20:16 ` Tom Zanussi
2011-11-09 20:44 ` James Abernathy
2011-11-09 19:53 ` Tom Zanussi
2011-11-09 19:17 ` Joshua Lock
2011-11-09 19:50 ` Tom Zanussi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320867784.16608.49.camel@elmorro \
--to=tom.zanussi@intel.com \
--cc=jfabernathy@gmail.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.