[PATCH 1/2] ASoC: cs42l51: Clear CS42L51_MIC_POWER_CTL_AUTO bit for MODE_SLAVE and MODE_MASTER

[Axel Lin <axel.lin@gmail.com>]

According to the datasheet:

MIC Power Control & Speed Control (Address 03h)
BIT[7] : Auto-Detect Speed Mode (AUTO)
        Default: 1
        0 - Disable
        1 - Enable

Function:
Enables the auto-detect circuitry for detecting the speed mode
of the CODEC when operating as a slave.
When AUTO is enabled, the MCLK/LRCK ratio must be implemented
according to Table 3 on page 39. The
SPEED[1:0] bits are ignored when this bit is enabled.
Speed is determined by the MCLK/LRCK ratio.

SPEED[1:0] bits are ignored when this bit is enabled.
Thus we need to clear this bit for MODE_SLAVE and MODE_MASTER
because the default of this bit is 1 (Enable).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 sound/soc/codecs/cs42l51.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index 00718b5..35c5ac3 100644
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -400,7 +400,8 @@ static int cs42l51_hw_params(struct snd_pcm_substream *substream,
 
 	intf_ctl &= ~(CS42L51_INTF_CTL_MASTER | CS42L51_INTF_CTL_ADC_I2S
 			| CS42L51_INTF_CTL_DAC_FORMAT(7));
-	power_ctl &= ~(CS42L51_MIC_POWER_CTL_SPEED(3)
+	power_ctl &= ~(CS42L51_MIC_POWER_CTL_AUTO
+			| CS42L51_MIC_POWER_CTL_SPEED(3)
 			| CS42L51_MIC_POWER_CTL_MCLK_DIV2);
 
 	switch (cs42l51->func) {
-- 
1.7.5.4