From: "Benoît Canet" <benoit.canet@gmail.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, "Benoît Canet" <benoit.canet@gmail.com>,
avi@redhat.com
Subject: [Qemu-devel] [PATCH 1/5] omap_sx1: convert to memory API
Date: Fri, 25 Nov 2011 15:21:33 +0100 [thread overview]
Message-ID: <1322230897-7470-2-git-send-email-benoit.canet@gmail.com> (raw)
In-Reply-To: <1322230897-7470-1-git-send-email-benoit.canet@gmail.com>
Signed-off-by: Benoît Canet <benoit.canet@gmail.com>
---
hw/omap_sx1.c | 113 ++++++++++++++++++++++++++++++---------------------------
1 files changed, 59 insertions(+), 54 deletions(-)
diff --git a/hw/omap_sx1.c b/hw/omap_sx1.c
index fe53545..b056bc9 100644
--- a/hw/omap_sx1.c
+++ b/hw/omap_sx1.c
@@ -59,46 +59,42 @@
* - 1 RTC
*/
-static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
-{
- uint32_t *val = (uint32_t *) opaque;
-
- return *val >> ((offset & 3) << 3);
-}
-
-static uint32_t static_readh(void *opaque, target_phys_addr_t offset)
-{
- uint32_t *val = (uint32_t *) opaque;
-
- return *val >> ((offset & 1) << 3);
-}
-
-static uint32_t static_readw(void *opaque, target_phys_addr_t offset)
+static uint64_t static_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
{
uint32_t *val = (uint32_t *) opaque;
+ uint32_t mask = 0;
+
+ switch (size) {
+ case 1:
+ mask = 3;
+ break;
+ case 2:
+ mask = 1;
+ break;
+ case 4:
+ mask = 0;
+ break;
+ default:
+ mask = 0;
+ }
- return *val >> ((offset & 0) << 3);
+ return *val >> ((offset & mask) << 3);
}
static void static_write(void *opaque, target_phys_addr_t offset,
- uint32_t value)
+ uint64_t value, unsigned size)
{
#ifdef SPY
- printf("%s: value %08lx written at " PA_FMT "\n",
- __FUNCTION__, value, offset);
+ printf("%s: value %" PRIx64 " %u bytes written at 0x%x\n",
+ __func__, value, size, (int)offset);
#endif
}
-static CPUReadMemoryFunc * const static_readfn[] = {
- static_readb,
- static_readh,
- static_readw,
-};
-
-static CPUWriteMemoryFunc * const static_writefn[] = {
- static_write,
- static_write,
- static_write,
+static const MemoryRegionOps static_ops = {
+ .read = static_read,
+ .write = static_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
};
#define sdram_size 0x02000000
@@ -123,7 +119,9 @@ static void sx1_init(ram_addr_t ram_size,
{
struct omap_mpu_state_s *cpu;
MemoryRegion *address_space = get_system_memory();
- int io;
+ MemoryRegion *flash = g_new(MemoryRegion, 1);
+ MemoryRegion *flash_1 = g_new(MemoryRegion, 1);
+ MemoryRegion *cs = g_new(MemoryRegion, 4);
static uint32_t cs0val = 0x00213090;
static uint32_t cs1val = 0x00215070;
static uint32_t cs2val = 0x00001139;
@@ -140,20 +138,25 @@ static void sx1_init(ram_addr_t ram_size,
cpu = omap310_mpu_init(address_space, sx1_binfo.ram_size, cpu_model);
/* External Flash (EMIFS) */
- cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,
- qemu_ram_alloc(NULL, "omap_sx1.flash0-0",
- flash_size) | IO_MEM_ROM);
-
- io = cpu_register_io_memory(static_readfn, static_writefn, &cs0val,
- DEVICE_NATIVE_ENDIAN);
- cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,
- OMAP_CS0_SIZE - flash_size, io);
- io = cpu_register_io_memory(static_readfn, static_writefn, &cs2val,
- DEVICE_NATIVE_ENDIAN);
- cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);
- io = cpu_register_io_memory(static_readfn, static_writefn, &cs3val,
- DEVICE_NATIVE_ENDIAN);
- cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);
+ memory_region_init_ram(flash, NULL, "omap_sx1.flash0-0", flash_size);
+ memory_region_set_readonly(flash, true);
+ memory_region_add_subregion(address_space, OMAP_CS0_BASE, flash);
+
+ memory_region_init_io(&cs[0], &static_ops, &cs0val,
+ "sx1.cs0", OMAP_CS0_SIZE - flash_size);
+ memory_region_add_subregion(address_space,
+ OMAP_CS0_BASE + flash_size, &cs[0]);
+
+
+ memory_region_init_io(&cs[2], &static_ops, &cs2val,
+ "sx1.cs2", OMAP_CS2_SIZE);
+ memory_region_add_subregion(address_space,
+ OMAP_CS2_BASE, &cs[2]);
+
+ memory_region_init_io(&cs[3], &static_ops, &cs3val,
+ "sx1.cs3", OMAP_CS3_SIZE);
+ memory_region_add_subregion(address_space,
+ OMAP_CS2_BASE, &cs[3]);
fl_idx = 0;
#ifdef TARGET_WORDS_BIGENDIAN
@@ -176,13 +179,14 @@ static void sx1_init(ram_addr_t ram_size,
if ((version == 1) &&
(dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) {
- cpu_register_physical_memory(OMAP_CS1_BASE, flash1_size,
- qemu_ram_alloc(NULL, "omap_sx1.flash1-0",
- flash1_size) | IO_MEM_ROM);
- io = cpu_register_io_memory(static_readfn, static_writefn, &cs1val,
- DEVICE_NATIVE_ENDIAN);
- cpu_register_physical_memory(OMAP_CS1_BASE + flash1_size,
- OMAP_CS1_SIZE - flash1_size, io);
+ memory_region_init_ram(flash_1, NULL, "omap_sx1.flash1-0", flash1_size);
+ memory_region_set_readonly(flash_1, true);
+ memory_region_add_subregion(address_space, OMAP_CS1_BASE, flash_1);
+
+ memory_region_init_io(&cs[1], &static_ops, &cs1val,
+ "sx1.cs1", OMAP_CS1_SIZE - flash1_size);
+ memory_region_add_subregion(address_space,
+ OMAP_CS1_BASE + flash1_size, &cs[1]);
if (!pflash_cfi01_register(OMAP_CS1_BASE, NULL,
"omap_sx1.flash1-1", flash1_size,
@@ -194,9 +198,10 @@ static void sx1_init(ram_addr_t ram_size,
}
fl_idx++;
} else {
- io = cpu_register_io_memory(static_readfn, static_writefn, &cs1val,
- DEVICE_NATIVE_ENDIAN);
- cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);
+ memory_region_init_io(&cs[1], &static_ops, &cs1val,
+ "sx1.cs1", OMAP_CS1_SIZE);
+ memory_region_add_subregion(address_space,
+ OMAP_CS1_BASE, &cs[1]);
}
if (!kernel_filename && !fl_idx) {
--
1.7.7.3
next prev parent reply other threads:[~2011-11-25 14:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-25 14:21 [Qemu-devel] [PATCH 0/5] convert some omap devices to memory API Benoît Canet
2011-11-25 14:21 ` Benoît Canet [this message]
2011-11-27 8:49 ` [Qemu-devel] [PATCH 1/5] omap_sx1: convert " Avi Kivity
2011-11-25 14:21 ` [Qemu-devel] [PATCH 2/5] omap_spi: " Benoît Canet
2011-11-25 14:21 ` [Qemu-devel] [PATCH 3/5] omap_lcdc: " Benoît Canet
2011-11-25 14:21 ` [Qemu-devel] [PATCH 4/5] omap_l4: " Benoît Canet
2011-11-25 14:21 ` [Qemu-devel] [PATCH 5/5] omap_i2c: " Benoît Canet
2011-11-28 13:32 ` [Qemu-devel] [PATCH 0/5] convert some omap devices " Avi Kivity
2011-11-29 14:43 ` Benoît Canet
2011-11-29 14:51 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322230897-7470-2-git-send-email-benoit.canet@gmail.com \
--to=benoit.canet@gmail.com \
--cc=avi@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.