From: Peter Krystad <pkrystad@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: pkrystad@quicinc.com, Peter Krystad <pkrystad@codeaurora.org>
Subject: [PATCHv4 1/1] Add L2CAP Create/Move Channel and A2MP definitions
Date: Mon, 12 Dec 2011 21:57:16 -0800 [thread overview]
Message-ID: <1323755836-15357-2-git-send-email-pkrystad@codeaurora.org> (raw)
In-Reply-To: <1323755836-15357-1-git-send-email-pkrystad@codeaurora.org>
---
lib/bluetooth.h | 5 ++
lib/l2cap.h | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 163 insertions(+), 0 deletions(-)
diff --git a/lib/bluetooth.h b/lib/bluetooth.h
index 5bd4f03..ce49d6c 100644
--- a/lib/bluetooth.h
+++ b/lib/bluetooth.h
@@ -76,6 +76,11 @@ struct bt_security {
#define BT_FLUSHABLE_OFF 0
#define BT_FLUSHABLE_ON 1
+#define BT_CHANNEL_POLICY 10
+#define BT_CHANNEL_POLICY_BREDR_ONLY 0
+#define BT_CHANNEL_POLICY_BREDR_PREFERRED 1
+#define BT_CHANNEL_POLICY_AMP_PREFERRED 2
+
/* Connection and socket states */
enum {
BT_CONNECTED = 1, /* Equal to TCP_ESTABLISHED to make net code happy */
diff --git a/lib/l2cap.h b/lib/l2cap.h
index 68593d3..7605219 100644
--- a/lib/l2cap.h
+++ b/lib/l2cap.h
@@ -82,6 +82,12 @@ struct l2cap_conninfo {
#define L2CAP_ECHO_RSP 0x09
#define L2CAP_INFO_REQ 0x0a
#define L2CAP_INFO_RSP 0x0b
+#define L2CAP_CREATE_REQ 0x0c
+#define L2CAP_CREATE_RSP 0x0d
+#define L2CAP_MOVE_REQ 0x0e
+#define L2CAP_MOVE_RSP 0x0f
+#define L2CAP_MOVE_CFM 0x10
+#define L2CAP_MOVE_CFM_RSP 0x11
/* L2CAP extended feature mask */
#define L2CAP_FEAT_FLOWCTL 0x00000001
@@ -226,6 +232,158 @@ typedef struct {
#define L2CAP_IR_SUCCESS 0x0000
#define L2CAP_IR_NOTSUPP 0x0001
+typedef struct {
+ uint16_t psm;
+ uint16_t scid;
+ uint8_t id;
+} __attribute__ ((packed)) l2cap_create_req;
+#define L2CAP_CREATE_REQ_SIZE 5
+
+typedef struct {
+ uint16_t dcid;
+ uint16_t scid;
+ uint16_t result;
+ uint16_t status;
+} __attribute__ ((packed)) l2cap_create_rsp;
+#define L2CAP_CREATE_RSP_SIZE 8
+
+typedef struct {
+ uint16_t icid;
+ uint8_t id;
+} __attribute__ ((packed)) l2cap_move_req;
+#define L2CAP_MOVE_REQ_SIZE 3
+
+typedef struct {
+ uint16_t icid;
+ uint16_t result;
+} __attribute__ ((packed)) l2cap_move_rsp;
+#define L2CAP_MOVE_RSP_SIZE 4
+
+typedef struct {
+ uint16_t icid;
+ uint16_t result;
+} __attribute__ ((packed)) l2cap_move_cfm;
+#define L2CAP_MOVE_CFM_SIZE 4
+
+typedef struct {
+ uint16_t icid;
+} __attribute__ ((packed)) l2cap_move_cfm_rsp;
+#define L2CAP_MOVE_CFM_RSP_SIZE 2
+
+/* A2MP Protocol */
+
+/* A2MP command codes */
+
+#define A2MP_COMMAND_REJ 0x01
+#define A2MP_DISCOVER_REQ 0x02
+#define A2MP_DISCOVER_RSP 0x03
+#define A2MP_CHANGE_NOTIFY 0x04
+#define A2MP_CHANGE_RSP 0x05
+#define A2MP_INFO_REQ 0x06
+#define A2MP_INFO_RSP 0x07
+#define A2MP_ASSOC_REQ 0x08
+#define A2MP_ASSOC_RSP 0x09
+#define A2MP_CREATE_REQ 0x0a
+#define A2MP_CREATE_RSP 0x0b
+#define A2MP_DISCONN_REQ 0x0c
+#define A2MP_DISCONN_RSP 0x0d
+
+struct a2mp_hdr {
+ uint8_t code;
+ uint8_t ident;
+ uint16_t len;
+} __attribute__ ((packed));
+#define A2MP_HDR_SIZE 4
+
+struct a2mp_command_rej {
+ uint16_t reason;
+} __attribute__ ((packed));
+
+struct a2mp_discover_req {
+ uint16_t mtu;
+ uint16_t mask;
+} __attribute__ ((packed));
+
+struct a2mp_ctrl {
+ uint8_t id;
+ uint8_t type;
+ uint8_t status;
+} __attribute__ ((packed));
+
+struct a2mp_discover_rsp {
+ uint16_t mtu;
+ uint16_t mask;
+ struct a2mp_ctrl ctrl_list[0];
+} __attribute__ ((packed));
+
+struct a2mp_info_req {
+ uint8_t id;
+} __attribute__ ((packed));
+
+struct a2mp_info_rsp {
+ uint8_t id;
+ uint8_t status;
+ uint32_t total_bw;
+ uint32_t max_bw;
+ uint32_t min_latency;
+ uint16_t pal_caps;
+ uint16_t assoc_size;
+} __attribute__ ((packed));
+
+struct a2mp_assoc_req {
+ uint8_t id;
+} __attribute__ ((packed));
+
+struct a2mp_assoc_rsp {
+ uint8_t id;
+ uint8_t status;
+ uint8_t assoc_data[0];
+} __attribute__ ((packed));
+
+struct a2mp_create_req {
+ uint8_t local_id;
+ uint8_t remote_id;
+ uint8_t assoc_data[0];
+} __attribute__ ((packed));
+
+struct a2mp_create_rsp {
+ uint8_t local_id;
+ uint8_t remote_id;
+ uint8_t status;
+} __attribute__ ((packed));
+
+struct a2mp_disconn_req {
+ uint8_t local_id;
+ uint8_t remote_id;
+} __attribute__ ((packed));
+
+struct a2mp_disconn_rsp {
+ uint8_t local_id;
+ uint8_t remote_id;
+ uint8_t status;
+} __attribute__ ((packed));
+
+#define A2MP_COMMAND_NOT_RECOGNIZED 0x0000
+
+/* AMP controller status */
+#define AMP_CTRL_POWERED_DOWN 0x00
+#define AMP_CTRL_BLUETOOTH_ONLY 0x01
+#define AMP_CTRL_NO_CAPACITY 0x02
+#define AMP_CTRL_LOW_CAPACITY 0x03
+#define AMP_CTRL_MEDIUM_CAPACITY 0x04
+#define AMP_CTRL_HIGH_CAPACITY 0x05
+#define AMP_CTRL_FULL_CAPACITY 0x06
+
+/* A2MP response status */
+#define A2MP_STATUS_SUCCESS 0x00
+#define A2MP_STATUS_INVALID_CTRL_ID 0x01
+#define A2MP_STATUS_UNABLE_START_LINK_CREATION 0x02
+#define A2MP_STATUS_NO_PHYSICAL_LINK_EXISTS 0x02
+#define A2MP_STATUS_COLLISION_OCCURED 0x03
+#define A2MP_STATUS_DISCONN_REQ_RECVD 0x04
+#define A2MP_STATUS_PHYS_LINK_EXISTS 0x05
+#define A2MP_STATUS_SECURITY_VIOLATION 0x06
+
#ifdef __cplusplus
}
#endif
--
1.7.4.1
--
Peter Krystad
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
prev parent reply other threads:[~2011-12-13 5:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-13 5:57 [PATCHv4 0/1] Add BT 3.0+HS definitions Peter Krystad
2011-12-13 5:57 ` Peter Krystad [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323755836-15357-2-git-send-email-pkrystad@codeaurora.org \
--to=pkrystad@codeaurora.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=pkrystad@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.