From: "Frédéric Danis" <frederic.danis@linux.intel.com>
To: linux-bluetooth@vger.kernel.org
Subject: [RFC v5 3/8] audio: Remove dummy tel driver
Date: Wed, 14 Dec 2011 10:05:05 +0100 [thread overview]
Message-ID: <1323853510-5195-4-git-send-email-frederic.danis@linux.intel.com> (raw)
In-Reply-To: <1323853510-5195-1-git-send-email-frederic.danis@linux.intel.com>
Remove dummy telephony driver which has been deprecated by
org.bluez.Telephony interface.
---
audio/telephony-dummy.c | 433 -----------------------------------------------
1 files changed, 0 insertions(+), 433 deletions(-)
delete mode 100644 audio/telephony-dummy.c
diff --git a/audio/telephony-dummy.c b/audio/telephony-dummy.c
deleted file mode 100644
index 1f89079..0000000
--- a/audio/telephony-dummy.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- *
- * BlueZ - Bluetooth protocol stack for Linux
- *
- * Copyright (C) 2006-2010 Nokia Corporation
- * Copyright (C) 2004-2010 Marcel Holtmann <marcel@holtmann.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <glib.h>
-#include <dbus/dbus.h>
-#include <gdbus.h>
-
-#include "log.h"
-#include "telephony.h"
-#include "error.h"
-
-#define TELEPHONY_DUMMY_IFACE "org.bluez.TelephonyTest"
-#define TELEPHONY_DUMMY_PATH "/org/bluez/test"
-
-static DBusConnection *connection = NULL;
-
-static const char *chld_str = "0,1,1x,2,2x,3,4";
-static char *subscriber_number = NULL;
-static char *active_call_number = NULL;
-static int active_call_status = 0;
-static int active_call_dir = 0;
-
-static gboolean events_enabled = FALSE;
-
-static struct indicator dummy_indicators[] =
-{
- { "battchg", "0-5", 5, TRUE },
- { "signal", "0-5", 5, TRUE },
- { "service", "0,1", 1, TRUE },
- { "call", "0,1", 0, TRUE },
- { "callsetup", "0-3", 0, TRUE },
- { "callheld", "0-2", 0, FALSE },
- { "roam", "0,1", 0, TRUE },
- { NULL }
-};
-
-void telephony_device_connected(void *telephony_device)
-{
- DBG("telephony-dummy: device %p connected", telephony_device);
-}
-
-void telephony_device_disconnected(void *telephony_device)
-{
- DBG("telephony-dummy: device %p disconnected", telephony_device);
- events_enabled = FALSE;
-}
-
-void telephony_event_reporting_req(void *telephony_device, int ind)
-{
- events_enabled = ind == 1 ? TRUE : FALSE;
-
- telephony_event_reporting_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_response_and_hold_req(void *telephony_device, int rh)
-{
- telephony_response_and_hold_rsp(telephony_device,
- CME_ERROR_NOT_SUPPORTED);
-}
-
-void telephony_last_dialed_number_req(void *telephony_device)
-{
- telephony_last_dialed_number_rsp(telephony_device, CME_ERROR_NONE);
-
- /* Notify outgoing call set-up successfully initiated */
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_OUTGOING);
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_ALERTING);
-
- active_call_status = CALL_STATUS_ALERTING;
- active_call_dir = CALL_DIR_OUTGOING;
-}
-
-void telephony_terminate_call_req(void *telephony_device)
-{
- g_free(active_call_number);
- active_call_number = NULL;
-
- telephony_terminate_call_rsp(telephony_device, CME_ERROR_NONE);
-
- if (telephony_get_indicator(dummy_indicators, "callsetup") > 0)
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_INACTIVE);
- else
- telephony_update_indicator(dummy_indicators, "call",
- EV_CALL_INACTIVE);
-}
-
-void telephony_answer_call_req(void *telephony_device)
-{
- telephony_answer_call_rsp(telephony_device, CME_ERROR_NONE);
-
- telephony_update_indicator(dummy_indicators, "call", EV_CALL_ACTIVE);
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_INACTIVE);
-
- active_call_status = CALL_STATUS_ACTIVE;
-}
-
-void telephony_dial_number_req(void *telephony_device, const char *number)
-{
- g_free(active_call_number);
- active_call_number = g_strdup(number);
-
- DBG("telephony-dummy: dial request to %s", active_call_number);
-
- telephony_dial_number_rsp(telephony_device, CME_ERROR_NONE);
-
- /* Notify outgoing call set-up successfully initiated */
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_OUTGOING);
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_ALERTING);
-
- active_call_status = CALL_STATUS_ALERTING;
- active_call_dir = CALL_DIR_OUTGOING;
-}
-
-void telephony_transmit_dtmf_req(void *telephony_device, char tone)
-{
- DBG("telephony-dummy: transmit dtmf: %c", tone);
- telephony_transmit_dtmf_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_subscriber_number_req(void *telephony_device)
-{
- DBG("telephony-dummy: subscriber number request");
- if (subscriber_number)
- telephony_subscriber_number_ind(subscriber_number,
- NUMBER_TYPE_TELEPHONY,
- SUBSCRIBER_SERVICE_VOICE);
- telephony_subscriber_number_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_list_current_calls_req(void *telephony_device)
-{
- DBG("telephony-dummy: list current calls request");
- if (active_call_number)
- telephony_list_current_call_ind(1, active_call_dir,
- active_call_status,
- CALL_MODE_VOICE,
- CALL_MULTIPARTY_NO,
- active_call_number,
- NUMBER_TYPE_TELEPHONY);
- telephony_list_current_calls_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_operator_selection_req(void *telephony_device)
-{
- telephony_operator_selection_ind(OPERATOR_MODE_AUTO, "DummyOperator");
- telephony_operator_selection_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_call_hold_req(void *telephony_device, const char *cmd)
-{
- DBG("telephony-dymmy: got call hold request %s", cmd);
- telephony_call_hold_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_nr_and_ec_req(void *telephony_device, gboolean enable)
-{
- DBG("telephony-dummy: got %s NR and EC request",
- enable ? "enable" : "disable");
-
- telephony_nr_and_ec_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_voice_dial_req(void *telephony_device, gboolean enable)
-{
- DBG("telephony-dummy: got %s voice dial request",
- enable ? "enable" : "disable");
-
- g_dbus_emit_signal(connection, TELEPHONY_DUMMY_PATH,
- TELEPHONY_DUMMY_IFACE, "VoiceDial",
- DBUS_TYPE_INVALID);
-
- telephony_voice_dial_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-void telephony_key_press_req(void *telephony_device, const char *keys)
-{
- DBG("telephony-dummy: got key press request for %s", keys);
- telephony_key_press_rsp(telephony_device, CME_ERROR_NONE);
-}
-
-/* D-Bus method handlers */
-static DBusMessage *outgoing_call(DBusConnection *conn, DBusMessage *msg,
- void *data)
-{
- const char *number;
-
- if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_STRING, &number,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
-
- DBG("telephony-dummy: outgoing call to %s", number);
-
- g_free(active_call_number);
- active_call_number = g_strdup(number);
-
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_OUTGOING);
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_ALERTING);
-
- active_call_status = CALL_STATUS_ALERTING;
- active_call_dir = CALL_DIR_OUTGOING;
-
- return dbus_message_new_method_return(msg);
-}
-
-static DBusMessage *incoming_call(DBusConnection *conn, DBusMessage *msg,
- void *data)
-{
- const char *number;
-
- if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_STRING, &number,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
-
- DBG("telephony-dummy: incoming call to %s", number);
-
- g_free(active_call_number);
- active_call_number = g_strdup(number);
-
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_INCOMING);
-
- active_call_status = CALL_STATUS_INCOMING;
- active_call_dir = CALL_DIR_INCOMING;
-
- telephony_incoming_call_ind(number, NUMBER_TYPE_TELEPHONY);
-
- return dbus_message_new_method_return(msg);
-}
-
-static DBusMessage *cancel_call(DBusConnection *conn, DBusMessage *msg,
- void *data)
-{
- DBG("telephony-dummy: cancel call");
-
- g_free(active_call_number);
- active_call_number = NULL;
-
- if (telephony_get_indicator(dummy_indicators, "callsetup") > 0) {
- telephony_update_indicator(dummy_indicators, "callsetup",
- EV_CALLSETUP_INACTIVE);
- telephony_calling_stopped_ind();
- }
-
- if (telephony_get_indicator(dummy_indicators, "call") > 0)
- telephony_update_indicator(dummy_indicators, "call",
- EV_CALL_INACTIVE);
-
- return dbus_message_new_method_return(msg);
-}
-
-static DBusMessage *signal_strength(DBusConnection *conn, DBusMessage *msg,
- void *data)
-{
- dbus_uint32_t strength;
-
- if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_UINT32, &strength,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
-
- if (strength > 5)
- return btd_error_invalid_args(msg);
-
- telephony_update_indicator(dummy_indicators, "signal", strength);
-
- DBG("telephony-dummy: signal strength set to %u", strength);
-
- return dbus_message_new_method_return(msg);
-}
-
-static DBusMessage *battery_level(DBusConnection *conn, DBusMessage *msg,
- void *data)
-{
- dbus_uint32_t level;
-
- if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_UINT32, &level,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
-
- if (level > 5)
- return btd_error_invalid_args(msg);
-
- telephony_update_indicator(dummy_indicators, "battchg", level);
-
- DBG("telephony-dummy: battery level set to %u", level);
-
- return dbus_message_new_method_return(msg);
-}
-
-static DBusMessage *roaming_status(DBusConnection *conn, DBusMessage *msg,
- void *data)
-{
- dbus_bool_t roaming;
- int val;
-
- if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_BOOLEAN, &roaming,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
-
- val = roaming ? EV_ROAM_ACTIVE : EV_ROAM_INACTIVE;
-
- telephony_update_indicator(dummy_indicators, "roam", val);
-
- DBG("telephony-dummy: roaming status set to %d", val);
-
- return dbus_message_new_method_return(msg);
-}
-
-static DBusMessage *registration_status(DBusConnection *conn, DBusMessage *msg,
- void *data)
-{
- dbus_bool_t registration;
- int val;
-
- if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_BOOLEAN, ®istration,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
-
- val = registration ? EV_SERVICE_PRESENT : EV_SERVICE_NONE;
-
- telephony_update_indicator(dummy_indicators, "service", val);
-
- DBG("telephony-dummy: registration status set to %d", val);
-
- return dbus_message_new_method_return(msg);
-}
-
-static DBusMessage *set_subscriber_number(DBusConnection *conn,
- DBusMessage *msg,
- void *data)
-{
- const char *number;
-
- if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_STRING, &number,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
-
- g_free(subscriber_number);
- subscriber_number = g_strdup(number);
-
- DBG("telephony-dummy: subscriber number set to %s", number);
-
- return dbus_message_new_method_return(msg);
-}
-
-static GDBusMethodTable dummy_methods[] = {
- { "OutgoingCall", "s", "", outgoing_call },
- { "IncomingCall", "s", "", incoming_call },
- { "CancelCall", "", "", cancel_call },
- { "SignalStrength", "u", "", signal_strength },
- { "BatteryLevel", "u", "", battery_level },
- { "RoamingStatus", "b", "", roaming_status },
- { "RegistrationStatus", "b", "", registration_status },
- { "SetSubscriberNumber","s", "", set_subscriber_number },
- { }
-};
-
-static GDBusSignalTable dummy_signals[] = {
- { "VoiceDial", "" },
- { }
-};
-
-int telephony_init(void)
-{
- uint32_t features = AG_FEATURE_REJECT_A_CALL |
- AG_FEATURE_ENHANCED_CALL_STATUS |
- AG_FEATURE_EXTENDED_ERROR_RESULT_CODES;
-
- DBG("");
-
- connection = dbus_bus_get(DBUS_BUS_SYSTEM, NULL);
-
- if (g_dbus_register_interface(connection, TELEPHONY_DUMMY_PATH,
- TELEPHONY_DUMMY_IFACE,
- dummy_methods, dummy_signals,
- NULL, NULL, NULL) == FALSE) {
- error("telephony-dummy interface %s init failed on path %s",
- TELEPHONY_DUMMY_IFACE, TELEPHONY_DUMMY_PATH);
- return -1;
- }
-
- telephony_ready_ind(features, dummy_indicators, BTRH_NOT_SUPPORTED,
- chld_str);
-
- return 0;
-}
-
-void telephony_exit(void)
-{
- DBG("");
-
- g_dbus_unregister_interface(connection, TELEPHONY_DUMMY_PATH,
- TELEPHONY_DUMMY_IFACE);
- dbus_connection_unref(connection);
- connection = NULL;
-
- telephony_deinit();
-}
--
1.7.1
next prev parent reply other threads:[~2011-12-14 9:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-14 9:05 [RFC v5 0/8] Add org.bluez.Telephony interface Frédéric Danis
2011-12-14 9:05 ` [RFC v5 1/8] audio: Move tel drivers to DBus interface Frédéric Danis
2011-12-15 10:00 ` Luiz Augusto von Dentz
2011-12-15 11:04 ` Frederic Danis
2011-12-15 11:25 ` Luiz Augusto von Dentz
2011-12-16 8:41 ` Frederic Danis
2011-12-16 10:35 ` Luiz Augusto von Dentz
2011-12-16 15:00 ` Frederic Danis
2011-12-17 10:15 ` Luiz Augusto von Dentz
2011-12-27 10:09 ` Frederic Danis
2011-12-14 9:05 ` [RFC v5 2/8] audio: Simplify org.bluez.Headset Frédéric Danis
2011-12-14 9:05 ` Frédéric Danis [this message]
2011-12-14 9:05 ` [RFC v5 4/8] audio: Remove maemo5 tel driver Frédéric Danis
2011-12-14 9:05 ` [RFC v5 5/8] audio: Remove maemo6 " Frédéric Danis
2011-12-14 9:05 ` [RFC v5 6/8] audio: Remove oFono " Frédéric Danis
2011-12-14 9:05 ` [RFC v5 7/8] audio: Move HFP/HSP AG servers to telephony.c Frédéric Danis
2011-12-14 9:05 ` [RFC v5 8/8] audio: Send transport path to telephony agent Frédéric Danis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323853510-5195-4-git-send-email-frederic.danis@linux.intel.com \
--to=frederic.danis@linux.intel.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.