From: linux@audioscience.com
To: tiwai@suse.de
Cc: Eliot Blennerhassett <eblennerhassett@audioscience.com>,
alsa-devel@alsa-project.org
Subject: [PATCH 17/21] Distinguish four different emif init errors.
Date: Thu, 22 Dec 2011 13:38:47 +1300 [thread overview]
Message-ID: <1324514331-22570-18-git-send-email-linux@audioscience.com> (raw)
In-Reply-To: <1324514331-22570-1-git-send-email-linux@audioscience.com>
From: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
---
sound/pci/asihpi/hpi6205.c | 35 +++++++++++++++++++----------------
1 files changed, 19 insertions(+), 16 deletions(-)
diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index e3d0f55..4f28738 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -45,18 +45,21 @@
#define HPI6205_ERROR_MSG_RESP_TIMEOUT 1016
/* initialization/bootload errors */
-#define HPI6205_ERROR_6205_NO_IRQ 1002
-#define HPI6205_ERROR_6205_INIT_FAILED 1003
-#define HPI6205_ERROR_6205_REG 1006
-#define HPI6205_ERROR_6205_DSPPAGE 1007
-#define HPI6205_ERROR_C6713_HPIC 1009
-#define HPI6205_ERROR_C6713_HPIA 1010
-#define HPI6205_ERROR_C6713_PLL 1011
-#define HPI6205_ERROR_DSP_INTMEM 1012
-#define HPI6205_ERROR_DSP_EXTMEM 1013
-#define HPI6205_ERROR_DSP_PLD 1014
-#define HPI6205_ERROR_6205_EEPROM 1017
-#define HPI6205_ERROR_DSP_EMIF 1018
+#define HPI6205_ERROR_6205_NO_IRQ 1002
+#define HPI6205_ERROR_6205_INIT_FAILED 1003
+#define HPI6205_ERROR_6205_REG 1006
+#define HPI6205_ERROR_6205_DSPPAGE 1007
+#define HPI6205_ERROR_C6713_HPIC 1009
+#define HPI6205_ERROR_C6713_HPIA 1010
+#define HPI6205_ERROR_C6713_PLL 1011
+#define HPI6205_ERROR_DSP_INTMEM 1012
+#define HPI6205_ERROR_DSP_EXTMEM 1013
+#define HPI6205_ERROR_DSP_PLD 1014
+#define HPI6205_ERROR_6205_EEPROM 1017
+#define HPI6205_ERROR_DSP_EMIF1 1018
+#define HPI6205_ERROR_DSP_EMIF2 1019
+#define HPI6205_ERROR_DSP_EMIF3 1020
+#define HPI6205_ERROR_DSP_EMIF4 1021
/*****************************************************************************/
/* for C6205 PCI i/f */
@@ -1612,7 +1615,7 @@ static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao, int dsp_index)
boot_loader_write_mem32(pao, dsp_index, 0x01800008, setting);
if (setting != boot_loader_read_mem32(pao, dsp_index,
0x01800008))
- return HPI6205_ERROR_DSP_EMIF;
+ return HPI6205_ERROR_DSP_EMIF1;
/* EMIF CE1 setup - 32 bit async. This is 6713 #1 HPI, */
/* which occupies D15..0. 6713 starts at 27MHz, so need */
@@ -1625,7 +1628,7 @@ static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao, int dsp_index)
boot_loader_write_mem32(pao, dsp_index, 0x01800004, setting);
if (setting != boot_loader_read_mem32(pao, dsp_index,
0x01800004))
- return HPI6205_ERROR_DSP_EMIF;
+ return HPI6205_ERROR_DSP_EMIF2;
/* EMIF CE2 setup - 32 bit async. This is 6713 #2 HPI, */
/* which occupies D15..0. 6713 starts at 27MHz, so need */
@@ -1637,7 +1640,7 @@ static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao, int dsp_index)
boot_loader_write_mem32(pao, dsp_index, 0x01800010, setting);
if (setting != boot_loader_read_mem32(pao, dsp_index,
0x01800010))
- return HPI6205_ERROR_DSP_EMIF;
+ return HPI6205_ERROR_DSP_EMIF3;
/* EMIF CE3 setup - 32 bit async. */
/* This is the PLD on the ASI5000 cards only */
@@ -1648,7 +1651,7 @@ static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao, int dsp_index)
boot_loader_write_mem32(pao, dsp_index, 0x01800014, setting);
if (setting != boot_loader_read_mem32(pao, dsp_index,
0x01800014))
- return HPI6205_ERROR_DSP_EMIF;
+ return HPI6205_ERROR_DSP_EMIF4;
/* set EMIF SDRAM control for 2Mx32 SDRAM (512x32x4 bank) */
/* need to use this else DSP code crashes? */
--
1.7.0.4
next prev parent reply other threads:[~2011-12-22 0:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-22 0:38 [PATCH 00/21] ALSA: asihpi - update to 4.10 linux
2011-12-22 0:38 ` [PATCH 01/21] Split hpi version info into separate header file linux
2011-12-22 0:38 ` [PATCH 02/21] Update copyright to 2011 linux
2011-12-22 0:38 ` [PATCH 03/21] Low latency mode stream has fixed channel count linux
2011-12-22 0:38 ` [PATCH 04/21] Volumes and meters may have 1 or 2 channels linux
2011-12-22 0:38 ` [PATCH 05/21] Use snd_pcm_debug_name to get substream name linux
2011-12-22 0:38 ` [PATCH 06/21] Correct stray capital letters in identifier linux
2011-12-22 0:38 ` [PATCH 07/21] Relax drained check for more reliable playback startup linux
2011-12-22 0:38 ` [PATCH 08/21] Only set sync if card supports hardware stream grouping linux
2011-12-22 0:38 ` [PATCH 09/21] Update node types linux
2011-12-22 0:38 ` [PATCH 10/21] Remove unused structs and defs linux
2011-12-22 0:38 ` [PATCH 11/21] Add new function codes linux
2011-12-22 0:38 ` [PATCH 12/21] Increase debug response buffer size linux
2011-12-22 0:38 ` [PATCH 13/21] Remove redundant struct members linux
2011-12-22 0:38 ` [PATCH 14/21] Simplify dsp code close linux
2011-12-22 0:38 ` [PATCH 15/21] Add autofade query linux
2011-12-22 0:38 ` [PATCH 16/21] New defs and comments linux
2011-12-22 0:38 ` linux [this message]
2011-12-22 0:38 ` [PATCH 18/21] Add HPI version to module description linux
2011-12-22 0:38 ` [PATCH 19/21] Correct headers in cached control responses linux
2011-12-22 0:38 ` [PATCH 20/21] Use valid channel count in format enumeration linux
2011-12-22 0:38 ` [PATCH 21/21] Fix format validity check linux
2011-12-22 7:15 ` [PATCH 00/21] ALSA: asihpi - update to 4.10 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324514331-22570-18-git-send-email-linux@audioscience.com \
--to=linux@audioscience.com \
--cc=alsa-devel@alsa-project.org \
--cc=eblennerhassett@audioscience.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.