Re:linux-next: build failure after merge of the battery tree

[Ashish Jangam <ashish.jangam@kpitcummins.com>]

> Hi Anton,
> 
> After merging the battery tree, today's linux-next build (x86_64
> allmodconfig) failed like this:
> 
> drivers/power/da9052-battery.c: In function 'da9052_bat_read_volt':
> drivers/power/da9052-battery.c:293:2: error: implicit declaration of function 'da9052_adc_manual_read' [-Werror=implicit-function-declaration]
> drivers/power/da9052-battery.c: In function 'da9052_bat_check_presence':
> drivers/power/da9052-battery.c:306:2: error: implicit declaration of function 'da9052_adc_read_temp' [-Werror=implicit-function-declaration]
> drivers/power/da9052-battery.c: In function 'da9052_determine_vc_tbl_index':
> drivers/power/da9052-battery.c:348:1: warning: control reaches end of non-void function [-Wreturn-type]
> cc1: some warnings being treated as errors
> 
> Caused by commit ded7fc7b0550 ("power_supply: Add DA9052 battery driver").
> 
> The commit message says "This driver depends on DA9052 MFD core dirver for definitions and methods".  That core is presumably still pending inclusion.
> 
> I have used the battery tree from next-20120104 for today.
This patch depends upon Da9052/53 MFD core and also on one of its incremental patch for ADC that got these functions definitions. Below is that patch.
We had already posted this patch.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
 drivers/mfd/da9052-core.c         |  188 +++++++++++++++++++++++++++++++++++++
 include/linux/mfd/da9052/da9052.h |   22 +++++
 2 files changed, 210 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c
index 5ddde2a..c21ce78 100644
--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -319,6 +319,162 @@ static bool da9052_reg_volatile(struct device *dev, unsigned int reg)
 	}
 }
 
+/*
+ * TBAT look-up table is computed from the R90 reg (8 bit register)
+ * reading as below. The battery temperature is in milliCentigrade
+ * TBAT = (1/(t1+1/298) - 273) * 1000 mC
+ * where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
+ * Default values are R25 = 10e3, B = 3380, ITBAT = 50e-6
+ * Example:
+ * R25=10E3, B=3380, ITBAT=50e-6, ADCVAL=62d calculates
+ * TBAT = 20015 mili degrees Centrigrade
+ *
+*/
+static const int32_t tbat_lookup[255] = {
+	183258, 144221, 124334, 111336, 101826, 94397, 88343, 83257,
+	78889, 75071, 71688, 68656, 65914, 63414, 61120, 59001,
+	570366, 55204, 53490, 51881, 50364, 48931, 47574, 46285,
+	45059, 43889, 42772, 41703, 40678, 39694, 38748, 37838,
+	36961, 36115, 35297, 34507, 33743, 33002, 32284, 31588,
+	30911, 30254, 29615, 28994, 28389, 27799, 27225, 26664,
+	26117, 25584, 25062, 24553, 24054, 23567, 23091, 22624,
+	22167, 21719, 21281, 20851, 20429, 20015, 19610, 19211,
+	18820, 18436, 18058, 17688, 17323, 16965, 16612, 16266,
+	15925, 15589, 15259, 14933, 14613, 14298, 13987, 13681,
+	13379, 13082, 12788, 12499, 12214, 11933, 11655, 11382,
+	11112, 10845, 10582, 10322, 10066, 9812, 9562, 9315,
+	9071, 8830, 8591, 8356, 8123, 7893, 7665, 7440,
+	7218, 6998, 6780, 6565, 6352, 6141, 5933, 5726,
+	5522, 5320, 5120, 4922, 4726, 4532, 4340, 4149,
+	3961, 3774, 3589, 3406, 3225, 3045, 2867, 2690,
+	2516, 2342, 2170, 2000, 1831, 1664, 1498, 1334,
+	1171, 1009, 849, 690, 532, 376, 221, 67,
+	-84, -236, -386, -535, -683, -830, -975, -1119,
+	-1263, -1405, -1546, -1686, -1825, -1964, -2101, -2237,
+	-2372, -2506, -2639, -2771, -2902, -3033, -3162, -3291,
+	-3418, -3545, -3671, -3796, -3920, -4044, -4166, -4288,
+	-4409, -4529, -4649, -4767, -4885, -5002, -5119, -5235,
+	-5349, -5464, -5577, -5690, -5802, -5913, -6024, -6134,
+	-6244, -6352, -6461, -6568, -6675, -6781, -6887, -6992,
+	-7096, -7200, -7303, -7406, -7508, -7609, -7710, -7810,
+	-7910, -8009, -8108, -8206, -8304, -8401, -8497, -8593,
+	-8689, -8784, -8878, -8972, -9066, -9159, -9251, -9343,
+	-9435, -9526, -9617, -9707, -9796, -9886, -9975, -10063,
+	-10151, -10238, -10325, -10412, -10839, -10923, -11007, -11090,
+	-11173, -11256, -11338, -11420, -11501, -11583, -11663, -11744,
+	-11823, -11903, -11982
+};
+
+static const u8 chan_mux[DA9052_ADC_VBBAT + 1] = {
+	[DA9052_ADC_VDDOUT]	= DA9052_ADC_MAN_MUXSEL_VDDOUT,
+	[DA9052_ADC_ICH]	= DA9052_ADC_MAN_MUXSEL_ICH,
+	[DA9052_ADC_TBAT]	= DA9052_ADC_MAN_MUXSEL_TBAT,
+	[DA9052_ADC_VBAT]	= DA9052_ADC_MAN_MUXSEL_VBAT,
+	[DA9052_ADC_IN4]	= DA9052_ADC_MAN_MUXSEL_AD4,
+	[DA9052_ADC_IN5]	= DA9052_ADC_MAN_MUXSEL_AD5,
+	[DA9052_ADC_IN6]	= DA9052_ADC_MAN_MUXSEL_AD6,
+	[DA9052_ADC_VBBAT]	= DA9052_ADC_MAN_MUXSEL_VBBAT
+};
+
+enum da9052_auxadc {
+	VDDOUT = DA9052_ADC_VDDOUT,
+	ICH = DA9052_ADC_ICH,
+	TBAT = DA9052_ADC_TBAT,
+	VBAT = DA9052_ADC_VBAT,
+	IN4 = DA9052_ADC_IN4,
+	IN5 = DA9052_ADC_IN5,
+	IN6 = DA9052_ADC_IN6,
+	VBBAT = DA9052_ADC_VBBAT,
+};
+
+struct da9052_auxadc_req {
+	struct list_head list;
+	enum da9052_auxadc input;
+	struct completion done;
+};
+
+int da9052_adc_manual_read(struct da9052 *da9052, unsigned char channel)
+{
+	struct da9052_auxadc_req *req;
+	int ret;
+	unsigned short calc_data;
+	unsigned short data;
+	unsigned char mux_sel;
+
+	if (channel > DA9052_ADC_VBBAT)
+		return -EINVAL;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	init_completion(&req->done);
+	req->input = channel;
+
+	mutex_lock(&da9052->auxadc_lock);
+
+	/* Channel gets activated on enabling the Conversion bit */
+	mux_sel = chan_mux[channel] | DA9052_ADC_MAN_MAN_CONV;
+
+	if (da9052->auxadc_active) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* Enqueue the request */
+	list_add(&req->list, &da9052->auxadc_pending);
+
+	ret = da9052_reg_write(da9052, DA9052_ADC_MAN_REG, mux_sel);
+	if (ret < 0)
+		goto err;
+
+	da9052->auxadc_active = channel;
+
+	mutex_unlock(&da9052->auxadc_lock);
+
+	/* Wait for an interrupt */
+	wait_for_completion_timeout(&req->done, msecs_to_jiffies(500));
+
+	mutex_lock(&da9052->auxadc_lock);
+
+	ret = da9052_reg_read(da9052, DA9052_ADC_RES_H_REG);
+	if (ret < 0)
+		goto err;
+
+	calc_data = (unsigned short)ret;
+	data = calc_data << 2;
+
+	ret = da9052_reg_read(da9052, DA9052_ADC_RES_L_REG);
+	if (ret < 0)
+		goto err;
+
+	calc_data = (unsigned short)(ret & DA9052_ADC_RES_LSB);
+	data |= calc_data;
+
+	ret = data;
+
+	list_del(&req->list);
+err:
+	mutex_unlock(&da9052->auxadc_lock);
+	kfree(req);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(da9052_adc_manual_read);
+
+int da9052_adc_read_temp(struct da9052 *da9052)
+{
+	int tbat;
+
+	tbat = da9052_reg_read(da9052, DA9052_TBAT_RES_REG);
+
+	if (tbat < 0)
+		return tbat;
+
+	/* ARRAY_SIZE check is not needed since TBAT is a 8-bit register */
+	return tbat_lookup[tbat - 1];
+}
+EXPORT_SYMBOL_GPL(da9052_adc_read_temp);
+
 static struct resource da9052_rtc_resource = {
 	.name = "ALM",
 	.start = DA9052_IRQ_ALARM,
@@ -641,6 +797,25 @@ struct regmap_config da9052_regmap_config = {
 };
 EXPORT_SYMBOL_GPL(da9052_regmap_config);
 
+static irqreturn_t da9052_auxadc_irq(int irq, void *irq_data)
+{
+	struct da9052 *da9052 = irq_data;
+	struct da9052_auxadc_req *req;
+
+	mutex_lock(&da9052->auxadc_lock);
+
+	/* Wake up any threads waiting for this request */
+	list_for_each_entry(req, &da9052->auxadc_pending, list) {
+		if (req->input == da9052->auxadc_active)
+			complete(&req->done);
+	}
+	da9052->auxadc_active = 0;
+
+	mutex_unlock(&da9052->auxadc_lock);
+
+	return IRQ_HANDLED;
+}
+
 int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id)
 {
 	struct da9052_pdata *pdata = da9052->dev->platform_data;
@@ -648,11 +823,15 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id)
 	int ret;
 
 	mutex_init(&da9052->io_lock);
+	mutex_init(&da9052->auxadc_lock);
+
+	INIT_LIST_HEAD(&da9052->auxadc_pending);
 
 	if (pdata && pdata->init != NULL)
 		pdata->init(da9052);
 
 	da9052->chip_id = chip_id;
+	da9052->auxadc_active = 0;
 
 	if (!pdata || !pdata->irq_base)
 		da9052->irq_base = -1;
@@ -669,6 +848,15 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id)
 	desc = irq_to_desc(da9052->chip_irq);
 	da9052->irq_base = regmap_irq_chip_get_base(desc->action->dev_id);
 
+	ret = request_threaded_irq(da9052->irq_base + DA9052_IRQ_ADC_EOM,
+				   NULL, da9052_auxadc_irq,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   "adc irq", da9052);
+	if (ret != 0) {
+		dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret);
+		da9052->auxadc_active = -1;
+	}
+
 	ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info,
 			      ARRAY_SIZE(da9052_subdev_info), NULL, 0);
 	if (ret)
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index 5702d1b..6069c26 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -33,6 +33,20 @@
 
 #include <linux/mfd/da9052/reg.h>
 
+/* HWMON Channel Definations */
+#define DA9052_ADC_VDDOUT	0
+#define DA9052_ADC_ICH		1
+#define DA9052_ADC_TBAT	2
+#define DA9052_ADC_VBAT	3
+#define DA9052_ADC_IN4		4
+#define DA9052_ADC_IN5		5
+#define DA9052_ADC_IN6		6
+#define DA9052_ADC_TSI		7
+#define DA9052_ADC_TJUNC	8
+#define DA9052_ADC_VBBAT	9
+
+#define DA9052_MASK_ADC_EOM	0x2000
+
 #define DA9052_IRQ_DCIN	0
 #define DA9052_IRQ_VBUS	1
 #define DA9052_IRQ_DCINREM	2
@@ -77,16 +91,24 @@ struct da9052_pdata;
 
 struct da9052 {
 	struct mutex io_lock;
+	struct mutex auxadc_lock;
 
 	struct device *dev;
 	struct regmap *regmap;
 
+	struct list_head auxadc_pending;
+	u8 auxadc_active;
+
 	int irq_base;
 	u8 chip_id;
 
 	int chip_irq;
 };
 
+/* ADC API */
+int da9052_adc_manual_read(struct da9052 *da9052, unsigned char channel);
+int da9052_adc_read_temp(struct da9052 *da9052);
+
 /* Device I/O API */
 static inline int da9052_reg_read(struct da9052 *da9052, unsigned char reg)
 {
---
> --
> Cheers,
> Stephen Rothwell                    sfr@canb.auug.org.au
> http://www.canb.auug.org.au/~sfr/