All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Anthony Liguori" <aliguori@us.ibm.com>,
	"Hervé Poussineau" <hpoussin@reactos.org>
Subject: [Qemu-devel] [PATCH 1/3] jazz-led: use trace framework
Date: Mon, 23 Jan 2012 11:34:04 +0100	[thread overview]
Message-ID: <1327314846-25318-2-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <1327314846-25318-1-git-send-email-hpoussin@reactos.org>


Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
 hw/jazz_led.c |   26 +++++++++-----------------
 trace-events  |    4 ++++
 2 files changed, 13 insertions(+), 17 deletions(-)

diff --git a/hw/jazz_led.c b/hw/jazz_led.c
index f8a2182..1af9268 100644
--- a/hw/jazz_led.c
+++ b/hw/jazz_led.c
@@ -26,17 +26,7 @@
 #include "mips.h"
 #include "console.h"
 #include "pixel_ops.h"
-
-//#define DEBUG_LED
-
-#ifdef DEBUG_LED
-#define DPRINTF(fmt, ...) \
-do { printf("jazz led: " fmt , ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while (0)
-#endif
-#define BADF(fmt, ...) \
-do { fprintf(stderr, "jazz led ERROR: " fmt , ## __VA_ARGS__);} while (0)
+#include "trace.h"
 
 typedef enum {
     REDRAW_NONE = 0, REDRAW_SEGMENTS = 1, REDRAW_BACKGROUND = 2,
@@ -52,18 +42,18 @@ typedef struct LedState {
 static uint32_t led_readb(void *opaque, target_phys_addr_t addr)
 {
     LedState *s = opaque;
-    uint32_t val;
+    uint8_t val;
 
     switch (addr) {
         case 0:
             val = s->segments;
             break;
         default:
-            BADF("invalid read at [" TARGET_FMT_plx "]\n", addr);
+            error_report("invalid read at [" TARGET_FMT_plx "]\n", addr);
             val = 0;
     }
 
-    DPRINTF("read addr=" TARGET_FMT_plx " val=0x%02x\n", addr, val);
+    trace_jazz_led_read(addr, val);
 
     return val;
 }
@@ -101,16 +91,18 @@ static uint32_t led_readl(void *opaque, target_phys_addr_t addr)
 static void led_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
 {
     LedState *s = opaque;
+    uint8_t new_val = val & 0xff;
 
-    DPRINTF("write addr=" TARGET_FMT_plx " val=0x%02x\n", addr, val);
+    trace_jazz_led_write(addr, new_val);
 
     switch (addr) {
         case 0:
-            s->segments = val;
+            s->segments = new_val;
             s->state |= REDRAW_SEGMENTS;
             break;
         default:
-            BADF("invalid write of 0x%08x at [" TARGET_FMT_plx "]\n", val, addr);
+            error_report("invalid write of 0x%x at [" TARGET_FMT_plx "]\n",
+                         new_val, addr);
             break;
     }
 }
diff --git a/trace-events b/trace-events
index 834eb7f..f38c2da 100644
--- a/trace-events
+++ b/trace-events
@@ -129,6 +129,10 @@ ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
 ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
 ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
 
+# hw/jazz-led.c
+jazz_led_read(uint64_t addr, uint8_t val) "read addr=0x%"PRIx64": 0x%x"
+jazz_led_write(uint64_t addr, uint8_t new) "write addr=0x%"PRIx64": 0x%x"
+
 # hw/lance.c
 lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x"
 lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x"
-- 
1.7.7.3

  reply	other threads:[~2012-01-23 10:33 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-23 10:34 [Qemu-devel] [PATCH 0/3] jazz-led: qdev conversion Hervé Poussineau
2012-01-23 10:34 ` Hervé Poussineau [this message]
2012-01-23 10:34 ` [Qemu-devel] [PATCH 2/3] jazz-led: convert to qdev Hervé Poussineau
2012-01-23 10:34 ` [Qemu-devel] [PATCH 3/3] jazz-led: compile it only twice Hervé Poussineau
2012-02-01 20:44 ` [Qemu-devel] [PATCH 0/3] jazz-led: qdev conversion Anthony Liguori
2012-02-01 22:28   ` Hervé Poussineau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1327314846-25318-2-git-send-email-hpoussin@reactos.org \
    --to=hpoussin@reactos.org \
    --cc=aliguori@us.ibm.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.