All of lore.kernel.org
 help / color / mirror / Atom feed
From: greearb@candelatech.com
To: netdev@vger.kernel.org
Cc: Ben Greear <greearb@candelatech.com>
Subject: [PATCH 2/2] e100: Support RXFCS feature flag.
Date: Mon,  6 Feb 2012 10:39:07 -0800	[thread overview]
Message-ID: <1328553547-27337-2-git-send-email-greearb@candelatech.com> (raw)
In-Reply-To: <1328553547-27337-1-git-send-email-greearb@candelatech.com>

From: Ben Greear <greearb@candelatech.com>

This allows e100 to be configured to append the
Ethernet FCS to the skb.

Useful for sniffing networks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
:100644 100644 485ab8c... 68b393b... M	drivers/net/ethernet/intel/e100.c
 drivers/net/ethernet/intel/e100.c |   15 ++++++++++++---
 1 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 485ab8c..68b393b 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1089,6 +1089,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	struct config *config = &cb->u.config;
 	u8 *c = (u8 *)config;
+	struct net_device *netdev = nic->netdev;
 
 	cb->command = cpu_to_le16(cb_config);
 
@@ -1132,6 +1133,9 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		config->promiscuous_mode = 0x1;		/* 1=on, 0=off */
 	}
 
+	if (unlikely(netdev->features & NETIF_F_RXFCS))
+		config->rx_crc_transfer = 0x1;	/* 1=save, 0=discard */
+
 	if (nic->flags & multicast_all)
 		config->multicast_all = 0x1;		/* 1=accept, 0=no */
 
@@ -1919,6 +1923,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	struct sk_buff *skb = rx->skb;
 	struct rfd *rfd = (struct rfd *)skb->data;
 	u16 rfd_status, actual_size;
+	u16 fcs_pad = 0;
 
 	if (unlikely(work_done && *work_done >= work_to_do))
 		return -EAGAIN;
@@ -1951,9 +1956,11 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	}
 
 	/* Get actual data size */
+	if (unlikely(dev->features & NETIF_F_RXFCS))
+		fcs_pad = 4;
 	actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
-	if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
-		actual_size = RFD_BUF_LEN - sizeof(struct rfd);
+	if (unlikely(actual_size > RFD_BUF_LEN + fcs_pad - sizeof(struct rfd)))
+		actual_size = RFD_BUF_LEN + fcs_pad - sizeof(struct rfd);
 
 	/* Get data */
 	pci_unmap_single(nic->pdev, rx->dma_addr,
@@ -1980,7 +1987,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	if (unlikely(!(rfd_status & cb_ok))) {
 		/* Don't indicate if hardware indicates errors */
 		dev_kfree_skb_any(skb);
-	} else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+	} else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN + fcs_pad) {
 		/* Don't indicate oversized frames */
 		nic->rx_over_length_errors++;
 		dev_kfree_skb_any(skb);
@@ -2754,6 +2761,8 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	if (!(netdev = alloc_etherdev(sizeof(struct nic))))
 		return -ENOMEM;
 
+	netdev->hw_features |= NETIF_F_RXFCS;
+
 	netdev->netdev_ops = &e100_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
 	netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
-- 
1.7.3.4

  reply	other threads:[~2012-02-06 18:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-06 18:39 [PATCH 1/2] net: Support RXFCS feature flag greearb
2012-02-06 18:39 ` greearb [this message]
2012-02-07 23:55   ` [PATCH 2/2] e100: " Ben Greear
  -- strict thread matches above, loose matches on Subject: below --
2011-06-23 23:13 [PATCH 0/2] Enable RXFCS as a feature greearb
2011-06-23 23:13 ` [PATCH 2/2] e100: Support RXFCS feature flag greearb

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1328553547-27337-2-git-send-email-greearb@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.