All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Kevin Wolf" <kwolf@redhat.com>,
	"Hervé Poussineau" <hpoussin@reactos.org>
Subject: [Qemu-devel] [PATCH v4 05/11] fdc: add CCR (Configuration Control Register) write register
Date: Mon,  6 Feb 2012 22:29:06 +0100	[thread overview]
Message-ID: <1328563752-3976-6-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <1328563752-3976-1-git-send-email-hpoussin@reactos.org>

DIR and CCR registers share the same address ; DIR is read-only
while CCR is write-only

CCR register is used to change media transfer rate, which will be
checked in following changes.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
 hw/fdc.c |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/hw/fdc.c b/hw/fdc.c
index 060ca84..2bad97b 100644
--- a/hw/fdc.c
+++ b/hw/fdc.c
@@ -224,6 +224,7 @@ static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value);
 static uint32_t fdctrl_read_data(FDCtrl *fdctrl);
 static void fdctrl_write_data(FDCtrl *fdctrl, uint32_t value);
 static uint32_t fdctrl_read_dir(FDCtrl *fdctrl);
+static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value);
 
 enum {
     FD_DIR_WRITE   = 0,
@@ -248,6 +249,7 @@ enum {
     FD_REG_DSR = 0x04,
     FD_REG_FIFO = 0x05,
     FD_REG_DIR = 0x07,
+    FD_REG_CCR = 0x07,
 };
 
 enum {
@@ -491,6 +493,9 @@ static void fdctrl_write (void *opaque, uint32_t reg, uint32_t value)
     case FD_REG_FIFO:
         fdctrl_write_data(fdctrl, value);
         break;
+    case FD_REG_CCR:
+        fdctrl_write_ccr(fdctrl, value);
+        break;
     default:
         break;
     }
@@ -881,6 +886,23 @@ static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value)
     fdctrl->dsr = value;
 }
 
+/* Configuration control register: 0x07 (write) */
+static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value)
+{
+    /* Reset mode */
+    if (!(fdctrl->dor & FD_DOR_nRESET)) {
+        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
+        return;
+    }
+    FLOPPY_DPRINTF("configuration control register set to 0x%02x\n", value);
+
+    /* Only the rate selection bits used in AT mode, and we
+     * store those in the DSR.
+     */
+    fdctrl->dsr = (fdctrl->dsr & ~FD_DSR_DRATEMASK) |
+                  (value & FD_DSR_DRATEMASK);
+}
+
 static int fdctrl_media_changed(FDrive *drv)
 {
     int ret;
-- 
1.7.8.3

  parent reply	other threads:[~2012-02-06 21:30 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-06 21:29 [Qemu-devel] [PATCH v4 00/11] Misc fixes for floppy emulation Hervé Poussineau
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 01/11] fdc: take side count into account Hervé Poussineau
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 02/11] fdc: set busy bit when starting a command Hervé Poussineau
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 03/11] fdc: most control commands do not generate interrupts Hervé Poussineau
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 04/11] fdc: handle read-only floppies (abort early on write commands) Hervé Poussineau
2012-02-06 21:29 ` Hervé Poussineau [this message]
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 06/11] block: add a transfer rate for floppy types Hervé Poussineau
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 07/11] pc: add 1.1 machine type Hervé Poussineau
2012-02-14 15:11   ` Kevin Wolf
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 08/11] fdc: add a 'check media rate' property. Not used yet Hervé Poussineau
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 09/11] fdc: check if media rate is correct before doing any transfer Hervé Poussineau
2012-02-14 15:16   ` Kevin Wolf
2012-02-14 15:28     ` Paolo Bonzini
2012-02-14 15:34       ` Kevin Wolf
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 10/11] fdc: fix seek command, which shouldn't check tracks Hervé Poussineau
2012-02-06 21:29 ` [Qemu-devel] [PATCH v4 11/11] fdc: DIR (Digital Input Register) should return status of current drive Hervé Poussineau
2012-02-14 12:31 ` [Qemu-devel] [PATCH v4 00/11] Misc fixes for floppy emulation Hervé Poussineau
2012-02-14 15:27 ` Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1328563752-3976-6-git-send-email-hpoussin@reactos.org \
    --to=hpoussin@reactos.org \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.