From: Malcolm Priestley <tvboxspy@gmail.com>
To: linux-media@vger.kernel.org
Subject: [PATCH] it913x-fe ver 1.15 read signal strenght using reg VAR_P_INBAND.
Date: Sun, 12 Feb 2012 13:03:06 +0000 [thread overview]
Message-ID: <1329051786.2778.3.camel@tvbox> (raw)
Read signal strength using VAR_P_INBAND and apply FEC preferred values.
Note this does not work on IT9137 devices even with dvb-usb-it9135-01.fw
firmware.
Config read_sl allows switch between read signal strength and signal
level.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
---
drivers/media/dvb/dvb-usb/it913x.c | 3 +
drivers/media/dvb/frontends/it913x-fe-priv.h | 5 ++
drivers/media/dvb/frontends/it913x-fe.c | 91 +++++++++++++++++++++++---
drivers/media/dvb/frontends/it913x-fe.h | 4 +
4 files changed, 93 insertions(+), 10 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index cfa415b..3b7b102 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -412,11 +412,13 @@ static int ite_firmware_select(struct usb_device *udev,
case IT9135_V1_FW:
it913x_config.firmware_ver = 1;
it913x_config.adc_x2 = 1;
+ it913x_config.read_slevel = false;
props->firmware = fw_it9135_v1;
break;
case IT9135_V2_FW:
it913x_config.firmware_ver = 1;
it913x_config.adc_x2 = 1;
+ it913x_config.read_slevel = false;
props->firmware = fw_it9135_v2;
switch (it913x_config.tuner_id_0) {
case IT9135_61:
@@ -432,6 +434,7 @@ static int ite_firmware_select(struct usb_device *udev,
default:
it913x_config.firmware_ver = 0;
it913x_config.adc_x2 = 0;
+ it913x_config.read_slevel = true;
props->firmware = fw_it9137;
}
diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb/frontends/it913x-fe-priv.h
index 93b086e..eb6fd8a 100644
--- a/drivers/media/dvb/frontends/it913x-fe-priv.h
+++ b/drivers/media/dvb/frontends/it913x-fe-priv.h
@@ -201,6 +201,11 @@ fe_modulation_t fe_con[] = {
QAM_64,
};
+enum {
+ PRIORITY_HIGH = 0, /* High-priority stream */
+ PRIORITY_LOW, /* Low-priority stream */
+};
+
/* Standard demodulator functions */
static struct it913xset set_solo_fe[] = {
{PRO_LINK, GPIOH5_EN, {0x01}, 0x01},
diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb/frontends/it913x-fe.c
index ccc36bf..84df03c 100644
--- a/drivers/media/dvb/frontends/it913x-fe.c
+++ b/drivers/media/dvb/frontends/it913x-fe.c
@@ -57,6 +57,7 @@ struct it913x_fe_state {
u32 frequency;
fe_modulation_t constellation;
fe_transmit_mode_t transmission_mode;
+ u8 priority;
u32 crystalFrequency;
u32 adcFrequency;
u8 tuner_type;
@@ -500,19 +501,87 @@ static int it913x_fe_read_status(struct dvb_frontend *fe, fe_status_t *status)
return 0;
}
+/* FEC values based on fe_code_rate_t non supported values 0*/
+int it913x_qpsk_pval[] = {0, -93, -91, -90, 0, -89, -88};
+int it913x_16qam_pval[] = {0, -87, -85, -84, 0, -83, -82};
+int it913x_64qam_pval[] = {0, -82, -80, -78, 0, -77, -76};
+
+static int it913x_get_signal_strength(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ u8 code_rate;
+ int ret, temp;
+ u8 lna_gain_os;
+
+ ret = it913x_read_reg_u8(state, VAR_P_INBAND);
+ if (ret < 0)
+ return ret;
+
+ /* VHF/UHF gain offset */
+ if (state->frequency < 300000000)
+ lna_gain_os = 7;
+ else
+ lna_gain_os = 14;
+
+ temp = (ret - 100) - lna_gain_os;
+
+ if (state->priority == PRIORITY_HIGH)
+ code_rate = p->code_rate_HP;
+ else
+ code_rate = p->code_rate_LP;
+
+ if (code_rate >= ARRAY_SIZE(it913x_qpsk_pval))
+ return -EINVAL;
+
+ deb_info("Reg VAR_P_INBAND:%d Calc Offset Value:%d", ret, temp);
+
+ /* Apply FEC offset values*/
+ switch (p->modulation) {
+ case QPSK:
+ temp -= it913x_qpsk_pval[code_rate];
+ break;
+ case QAM_16:
+ temp -= it913x_16qam_pval[code_rate];
+ break;
+ case QAM_64:
+ temp -= it913x_64qam_pval[code_rate];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (temp < -15)
+ ret = 0;
+ else if ((-15 <= temp) && (temp < 0))
+ ret = (2 * (temp + 15)) / 3;
+ else if ((0 <= temp) && (temp < 20))
+ ret = 4 * temp + 10;
+ else if ((20 <= temp) && (temp < 35))
+ ret = (2 * (temp - 20)) / 3 + 90;
+ else if (temp >= 35)
+ ret = 100;
+
+ deb_info("Signal Strength :%d", ret);
+
+ return ret;
+}
+
static int it913x_fe_read_signal_strength(struct dvb_frontend *fe,
u16 *strength)
{
struct it913x_fe_state *state = fe->demodulator_priv;
- int ret = it913x_read_reg_u8(state, SIGNAL_LEVEL);
- /*SIGNAL_LEVEL always returns 100%! so using FE_HAS_SIGNAL as switch*/
- if (state->it913x_status & FE_HAS_SIGNAL)
- ret = (ret * 0xff) / 0x64;
- else
- ret = 0x0;
- ret |= ret << 0x8;
- *strength = ret;
- return 0;
+ int ret = 0;
+ if (state->config->read_slevel) {
+ if (state->it913x_status & FE_HAS_SIGNAL)
+ ret = it913x_read_reg_u8(state, SIGNAL_LEVEL);
+ } else
+ ret = it913x_get_signal_strength(fe);
+
+ if (ret >= 0)
+ *strength = (u16)((u32)ret * 0xffff / 0x64);
+
+ return (ret < 0) ? -ENODEV : 0;
}
static int it913x_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
@@ -606,6 +675,8 @@ static int it913x_fe_get_frontend(struct dvb_frontend *fe)
if (reg[2] < 4)
p->hierarchy = fe_hi[reg[2]];
+ state->priority = reg[5];
+
p->code_rate_HP = (reg[6] < 6) ? fe_code[reg[6]] : FEC_NONE;
p->code_rate_LP = (reg[7] < 6) ? fe_code[reg[7]] : FEC_NONE;
@@ -972,5 +1043,5 @@ static struct dvb_frontend_ops it913x_fe_ofdm_ops = {
MODULE_DESCRIPTION("it913x Frontend and it9137 tuner");
MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
-MODULE_VERSION("1.13");
+MODULE_VERSION("1.15");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb/frontends/it913x-fe.h
index c4a908e..07fa459 100644
--- a/drivers/media/dvb/frontends/it913x-fe.h
+++ b/drivers/media/dvb/frontends/it913x-fe.h
@@ -34,6 +34,8 @@ struct ite_config {
u8 tuner_id_1;
u8 dual_mode;
u8 adf;
+ /* option to read SIGNAL_LEVEL */
+ u8 read_slevel;
};
#if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \
@@ -168,6 +170,8 @@ static inline struct dvb_frontend *it913x_fe_attach(
#define EST_SIGNAL_LEVEL 0x004a
#define FREE_BAND 0x004b
#define SUSPEND_FLAG 0x004c
+#define VAR_P_INBAND 0x00f7
+
/* Build in tuner types */
#define IT9137 0x38
#define IT9135_38 0x38
--
1.7.9
reply other threads:[~2012-02-12 13:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329051786.2778.3.camel@tvbox \
--to=tvboxspy@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.