Re: iptables not building on master

[Tom Zanussi <tom.zanussi@intel.com>]

Hi Autif,

I'm sure it's nothing to do with crownbay or meta-intel, but I'll fire
off a build anyway.  I only have my laptop available, so it may take all
night, but will let you know what I find.  FWIW I normally build on
master of both meta-intel and poky and haven't seen this, so it must be
very recent.

Tom

On Mon, 2012-03-05 at 17:44 -0500, Autif Khan wrote:
> Interesting - core image minimal builds fine - it does not actually
> build iptables. So the point is moot.
> 
> I did a clean build for core-image-sato and it failed at the same
> place for the same error.
> 
> I am no sure how meta-intel + meta-crownbay can interact with iptables
> - there is no recipe for iptables in meta-intel anywhere.
> 
> Tom - If you have the bandwidth - can you please see if you can
> replicate my woes.
> 
> I do not know anyone else who is on master and crownbay. If there -
> please let me know if things work for you.
> 
> This broke for me when I moved from M2 to master.
> 
> Thanks
> 
> Autif
> 
> On Mon, Mar 5, 2012 at 4:27 PM, Autif Khan <autif.mlist@gmail.com> wrote:
> > I love working with master:
> >
> > work/i586-poky-linux/polkit-0.104-r4/temp/log.do_configure says:
> >
> > configure: error: Could not find pam/pam-devel, please install the
> > needed packages.
> >
> > It seems like pam/pam-dev is needed in the target environment and not
> > in the host environment.
> >
> > Although, iptables seem to have built. I can't imagine how it will be
> > affected by meta-intel and meta-crownbay - they do not do anything
> > with iptables.
> >
> > Trying to build core-image-minimal for crownbay now. Will report when done.
> >
> > On Mon, Mar 5, 2012 at 4:03 PM, Autif Khan <autif.mlist@gmail.com> wrote:
> >> I was working with M2 until recently and had to switch to master.
> >> After I switched to master, I tried to bitbake core-image-sato for
> >> machine crownbay. The build fails with the following error:
> >>
> >> unknown type name '__aligned_u64'
> >>
> >> The file in question is extenstions/libxt_pkttypes.c
> >>
> >> After a bit of investigation (thanks Khem) it seems like instead of
> >> /usr/include/linux/types.h, the include/linux/types.h from iptables
> >> source is being included. These a bit incompatible - specifically -
> >> the definition for __aligned_u64 is not in the latter.
> >>
> >> I am building core-image-sato for qemux86 and will report when the
> >> build reaches that point.
> >>
> >> Is this a known issue?
> >>
> >> *** This issue should be hitting anyone doing a clean build on master.
> >> Or at the very least someone who builds iptables recipe***
> >>
> >> I looked at the recent change (post M2) that iptables was updated to
> >> 1.2.12.2 (from 1.2.12.1). There was a patch included for
> >> extensions/GNUmakefile  which does not build "check" target. I looked
> >> at what it does and realized that someone more experienced that I am
> >> should look into this.
> >>
> >> Thanks
> >>
> >> Autif