From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 5/7] ARM: ixp4xx: use runtime ioremap hook
Date: Tue, 6 Mar 2012 15:45:15 -0600 [thread overview]
Message-ID: <1331070317-9598-5-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1331070317-9598-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
Convert ixp4xx platforms to use run-time ioremap hook instead of the
compile time hook.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
---
arch/arm/mach-ixp4xx/avila-setup.c | 2 +
arch/arm/mach-ixp4xx/common.c | 33 ++++++++++++++++++++++++++
arch/arm/mach-ixp4xx/coyote-setup.c | 2 +
arch/arm/mach-ixp4xx/dsmg600-setup.c | 1 +
arch/arm/mach-ixp4xx/fsg-setup.c | 1 +
arch/arm/mach-ixp4xx/gateway7001-setup.c | 1 +
arch/arm/mach-ixp4xx/goramo_mlr.c | 1 +
arch/arm/mach-ixp4xx/gtwx5715-setup.c | 1 +
arch/arm/mach-ixp4xx/include/mach/io.h | 18 --------------
arch/arm/mach-ixp4xx/include/mach/platform.h | 1 +
arch/arm/mach-ixp4xx/ixdp425-setup.c | 4 +++
arch/arm/mach-ixp4xx/nas100d-setup.c | 1 +
arch/arm/mach-ixp4xx/nslu2-setup.c | 1 +
arch/arm/mach-ixp4xx/omixp-setup.c | 3 ++
arch/arm/mach-ixp4xx/vulcan-setup.c | 1 +
arch/arm/mach-ixp4xx/wg302v2-setup.c | 1 +
16 files changed, 54 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index a7277ad..90e42e9 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -165,6 +165,7 @@ static void __init avila_init(void)
MACHINE_START(AVILA, "Gateworks Avila Network Platform")
/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
@@ -184,6 +185,7 @@ MACHINE_END
MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index a6329a0..c60e7b8 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -31,6 +31,7 @@
#include <mach/udc.h>
#include <mach/hardware.h>
+#include <mach/io.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -517,3 +518,35 @@ void ixp4xx_restart(char mode, const char *cmd)
*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
}
}
+
+#ifdef CONFIG_IXP4XX_INDIRECT_PCI
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+
+static void __iomem *ixp4xx_ioremap_caller(unsigned long addr, size_t size,
+ unsigned int mtype, void *caller)
+{
+ if (!is_pci_memory(addr))
+ return __arm_ioremap_caller(addr, size, mtype, caller);
+
+ return (void __iomem *)addr;
+}
+
+static void ixp4xx_iounmap(void __iomem *addr)
+{
+ if (!is_pci_memory((__force u32)addr))
+ __iounmap(addr);
+}
+
+void __init ixp4xx_init_early(void)
+{
+ arch_ioremap_caller = ixp4xx_ioremap_caller;
+ arch_iounmap = ixp4xx_iounmap;
+}
+#else
+void __init ixp4xx_init_early(void) {}
+#endif
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index a74f86c..1b83110 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -110,6 +110,7 @@ static void __init coyote_init(void)
MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
@@ -129,6 +130,7 @@ MACHINE_END
MACHINE_START(IXDPG425, "Intel IXDPG425")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 67be177..97a0af8 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -280,6 +280,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
/* Maintainer: www.nslu2-linux.org */
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &dsmg600_timer,
.init_machine = dsmg600_init,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 6d58182..9175a25 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -270,6 +270,7 @@ static void __init fsg_init(void)
MACHINE_START(FSG, "Freecom FSG-3")
/* Maintainer: www.nslu2-linux.org */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 7ecf9b2..033c717 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -97,6 +97,7 @@ static void __init gateway7001_init(void)
MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index c0e3d69..0dda8f6 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -497,6 +497,7 @@ subsys_initcall(gmlr_pci_init);
MACHINE_START(GORAMO_MLR, "MultiLink")
/* Maintainer: Krzysztof Halasa */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index a23f893..18ebc6b 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -165,6 +165,7 @@ static void __init gtwx5715_init(void)
MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
/* Maintainer: George Joseph */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index ffb9d6a..6a52076 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -57,24 +57,6 @@ static inline int is_pci_memory(u32 addr)
return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
}
-static inline void __iomem * __indirect_ioremap(unsigned long addr, size_t size,
- unsigned int mtype)
-{
- if (!is_pci_memory(addr))
- return __arm_ioremap(addr, size, mtype);
-
- return (void __iomem *)addr;
-}
-
-static inline void __indirect_iounmap(void __iomem *addr)
-{
- if (!is_pci_memory((__force u32)addr))
- __iounmap(addr);
-}
-
-#define __arch_ioremap __indirect_ioremap
-#define __arch_iounmap __indirect_iounmap
-
#define writeb(v, p) __indirect_writeb(v, p)
#define writew(v, p) __indirect_writew(v, p)
#define writel(v, p) __indirect_writel(v, p)
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index df9250b..b66bedc 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -121,6 +121,7 @@ extern unsigned long ixp4xx_timer_freq;
* Functions used by platform-level setup code
*/
extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_early(void);
extern void ixp4xx_init_irq(void);
extern void ixp4xx_sys_init(void);
extern void ixp4xx_timer_init(void);
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 8a38b39..3d742ae 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -254,6 +254,7 @@ static void __init ixdp425_init(void)
MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
@@ -269,6 +270,7 @@ MACHINE_END
MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
@@ -283,6 +285,7 @@ MACHINE_END
MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
@@ -297,6 +300,7 @@ MACHINE_END
MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 1010eb7..33cb095 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -315,6 +315,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
/* Maintainer: www.nslu2-linux.org */
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = nas100d_init,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index aa355c3..e2903fa 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -301,6 +301,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
/* Maintainer: www.nslu2-linux.org */
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &nslu2_timer,
.init_machine = nslu2_init,
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 0940869..158ddb7 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -243,6 +243,7 @@ static void __init omixp_init(void)
MACHINE_START(DEVIXP, "Omicron DEVIXP")
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
@@ -254,6 +255,7 @@ MACHINE_END
MACHINE_START(MICCPT, "Omicron MICCPT")
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
@@ -268,6 +270,7 @@ MACHINE_END
MACHINE_START(MIC256, "Omicron MIC256")
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 9dec206..2798f43 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -237,6 +237,7 @@ static void __init vulcan_init(void)
MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 5ac0f0a..a785175 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -98,6 +98,7 @@ static void __init wg302v2_init(void)
MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
.map_io = ixp4xx_map_io,
+ .init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
--
1.7.5.4
next prev parent reply other threads:[~2012-03-06 21:45 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-02 3:13 [PATCH v3 00/30] mach/io.h cleanup and removal Rob Herring
2012-03-02 3:13 ` [PATCH v3 01/30] usb: ohci-pxa27x: add explicit include of hardware.h Rob Herring
2012-03-02 3:13 ` Rob Herring
2012-03-02 3:13 ` [PATCH v3 02/30] ARM: provide runtime hook for ioremap/iounmap Rob Herring
2012-03-05 19:21 ` Nicolas Pitre
2012-03-05 20:13 ` Arnd Bergmann
2012-03-05 21:11 ` Nicolas Pitre
2012-03-06 4:02 ` [PATCH v4 1/4] " Rob Herring
2012-03-06 4:02 ` [PATCH v4 2/4] ARM: imx: convert to common runtime ioremap hook Rob Herring
2012-03-06 4:02 ` [PATCH v4 3/4] ARM: msm: use " Rob Herring
2012-03-06 20:59 ` David Brown
2012-03-06 21:10 ` Rob Herring
2012-03-06 4:03 ` [PATCH v4 4/4] ARM: iop13xx: " Rob Herring
2012-03-06 16:53 ` [PATCH v4 1/4] ARM: provide runtime hook for ioremap/iounmap Arnd Bergmann
2012-03-06 17:18 ` Nicolas Pitre
2012-03-06 4:07 ` [PATCH v3 02/30] " Rob Herring
2012-03-06 17:20 ` Nicolas Pitre
2012-03-06 21:45 ` [PATCH v5 1/7] " Rob Herring
2012-03-06 21:45 ` [PATCH v5 2/7] ARM: imx: convert to common runtime ioremap hook Rob Herring
2012-03-06 21:45 ` [PATCH v5 3/7] ARM: msm: use " Rob Herring
2012-03-06 21:45 ` [PATCH v5 4/7] ARM: iop13xx: " Rob Herring
2012-03-06 21:45 ` Rob Herring [this message]
2012-03-06 22:11 ` [PATCH v5 5/7] ARM: ixp4xx: " Russell King - ARM Linux
2012-03-06 22:49 ` Rob Herring
2012-03-06 22:50 ` Rob Herring
2012-03-06 21:45 ` [PATCH v5 6/7] ARM: ebsa110: " Rob Herring
2012-03-06 22:06 ` Nicolas Pitre
2012-03-07 3:36 ` [PATCH] " Rob Herring
2012-03-06 21:45 ` [PATCH v5 7/7] ARM: remove compile time __arch_ioremap/__arch_iounmap Rob Herring
2012-03-06 22:01 ` Nicolas Pitre
2012-03-06 21:57 ` [PATCH v5 1/7] ARM: provide runtime hook for ioremap/iounmap Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 03/30] ARM: imx: convert to common runtime ioremap hook Rob Herring
2012-03-02 3:13 ` [PATCH v3 04/30] ARM: msm: use " Rob Herring
2012-03-02 3:13 ` [PATCH v3 05/30] ARM: msm: clean-up mach/io.h Rob Herring
2012-03-02 3:13 ` [PATCH v3 06/30] ARM: iop13xx: use runtime ioremap hook Rob Herring
2012-03-02 3:13 ` [PATCH v3 07/30] ARM: iop13xx: move io.h externs to pci.h Rob Herring
2012-03-02 3:13 ` [PATCH v3 08/30] ARM: OMAP: Remove remaining includes for mach/io.h Rob Herring
2012-03-02 3:13 ` [PATCH v3 09/30] [media] davinci: remove includes of mach/io.h Rob Herring
2012-03-02 3:13 ` [PATCH v3 10/30] ARM: davinci: remove unneeded mach/io.h include Rob Herring
2012-03-02 3:13 ` [PATCH v3 11/30] ARM: orion5x: clean-up mach/io.h Rob Herring
2012-03-05 19:14 ` Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 12/30] ARM: tegra: " Rob Herring
2012-03-02 3:13 ` [PATCH v3 13/30] ARM: ep93xx: " Rob Herring
2012-03-02 3:13 ` [PATCH v3 14/30] ARM: at91: add explicit include of hardware.h to uncompressor Rob Herring
2012-03-02 3:13 ` [PATCH v3 15/30] ARM: dove: add explicit include of dove.h to addr-map.c Rob Herring
2012-03-05 19:26 ` Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 16/30] ARM: clps711x: remove unneeded include of mach/io.h Rob Herring
2012-03-02 3:13 ` [PATCH v3 17/30] ARM: make mach/io.h include optional Rob Herring
2012-03-05 19:31 ` Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 18/30] ARM: remove bunch of now unused mach/io.h files Rob Herring
2012-03-05 19:33 ` Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 19/30] ARM: kill off __mem_pci Rob Herring
2012-03-02 3:13 ` [PATCH v3 20/30] iop13xx: use more regular PCI I/O space handling Rob Herring
2012-03-02 3:13 ` [PATCH v3 21/30] ARM: Add fixed PCI i/o mapping Rob Herring
2012-03-05 19:41 ` Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 22/30] ARM: tegra: use " Rob Herring
2012-03-02 6:59 ` Thierry Reding
2012-03-02 3:13 ` [PATCH v3 23/30] ARM: integrator: " Rob Herring
2012-03-02 3:13 ` [PATCH v3 24/30] ARM: shark: " Rob Herring
2012-03-02 3:13 ` [PATCH v3 25/30] ARM: footbridge: " Rob Herring
2012-03-02 3:13 ` [PATCH v3 26/30] ARM: dove: " Rob Herring
2012-03-05 20:12 ` Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 27/30] ARM: kirkwood: " Rob Herring
2012-03-05 19:59 ` Nicolas Pitre
2012-03-02 3:13 ` [PATCH v3 28/30] ARM: ixp23xx: " Rob Herring
2012-03-02 3:13 ` [PATCH v3 29/30] ARM: iop13xx: " Rob Herring
2012-03-02 3:13 ` [PATCH v3 30/30] ARM: orion5x: " Rob Herring
2012-03-05 20:13 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331070317-9598-5-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.