From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/2] regulator: Convert lp3972 to set_voltage_sel
Date: Fri, 23 Mar 2012 10:51:14 +0800 [thread overview]
Message-ID: <1332471074.13074.4.camel@phoenix> (raw)
In-Reply-To: <1332470994.13074.2.camel@phoenix>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/lp3972.c | 63 ++++++++++++-------------------------------
1 files changed, 18 insertions(+), 45 deletions(-)
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index 49a15ee..4f28d36 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -245,6 +245,11 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
{
int ldo = rdev_get_id(dev) - LP3972_LDO1;
+
+ if (index < LP3972_LDO_VOL_MIN_IDX(ldo) ||
+ index > LP3972_LDO_VOL_MAX_IDX(ldo))
+ return -EINVAL;
+
return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index];
}
@@ -292,34 +297,16 @@ static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val];
}
-static int lp3972_ldo_set_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV,
- unsigned int *selector)
+static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
+ unsigned int selector)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const int *vol_map = LP3972_LDO_VOL_VALUE_MAP(ldo);
- u16 val;
int shift, ret;
- if (min_vol < vol_map[LP3972_LDO_VOL_MIN_IDX(ldo)] ||
- min_vol > vol_map[LP3972_LDO_VOL_MAX_IDX(ldo)])
- return -EINVAL;
-
- for (val = LP3972_LDO_VOL_MIN_IDX(ldo);
- val <= LP3972_LDO_VOL_MAX_IDX(ldo); val++)
- if (vol_map[val] >= min_vol)
- break;
-
- if (val > LP3972_LDO_VOL_MAX_IDX(ldo) || vol_map[val] > max_vol)
- return -EINVAL;
-
- *selector = val;
-
shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo);
ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo),
- LP3972_LDO_VOL_MASK(ldo) << shift, val << shift);
+ LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift);
if (ret)
return ret;
@@ -355,12 +342,17 @@ static struct regulator_ops lp3972_ldo_ops = {
.enable = lp3972_ldo_enable,
.disable = lp3972_ldo_disable,
.get_voltage = lp3972_ldo_get_voltage,
- .set_voltage = lp3972_ldo_set_voltage,
+ .set_voltage_sel = lp3972_ldo_set_voltage_sel,
};
static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
{
int buck = rdev_get_id(dev) - LP3972_DCDC1;
+
+ if (index < LP3972_BUCK_VOL_MIN_IDX(buck) ||
+ index > LP3972_BUCK_VOL_MAX_IDX(buck))
+ return -EINVAL;
+
return 1000 * buck_voltage_map[buck][index];
}
@@ -419,34 +411,15 @@ static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
return val;
}
-static int lp3972_dcdc_set_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV,
- unsigned int *selector)
+static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
+ unsigned int selector)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const int *vol_map = buck_voltage_map[buck];
- u16 val;
int ret;
- if (min_vol < vol_map[LP3972_BUCK_VOL_MIN_IDX(buck)] ||
- min_vol > vol_map[LP3972_BUCK_VOL_MAX_IDX(buck)])
- return -EINVAL;
-
- for (val = LP3972_BUCK_VOL_MIN_IDX(buck);
- val <= LP3972_BUCK_VOL_MAX_IDX(buck); val++)
- if (vol_map[val] >= min_vol)
- break;
-
- if (val > LP3972_BUCK_VOL_MAX_IDX(buck) ||
- vol_map[val] > max_vol)
- return -EINVAL;
-
- *selector = val;
-
ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck),
- LP3972_BUCK_VOL_MASK, val);
+ LP3972_BUCK_VOL_MASK, selector);
if (ret)
return ret;
@@ -468,7 +441,7 @@ static struct regulator_ops lp3972_dcdc_ops = {
.enable = lp3972_dcdc_enable,
.disable = lp3972_dcdc_disable,
.get_voltage = lp3972_dcdc_get_voltage,
- .set_voltage = lp3972_dcdc_set_voltage,
+ .set_voltage_sel = lp3972_dcdc_set_voltage_sel,
};
static struct regulator_desc regulators[] = {
--
1.7.5.4
next prev parent reply other threads:[~2012-03-23 2:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-23 2:49 [PATCH 1/2] regulator: Convert lp3971 to set_voltage_sel Axel Lin
2012-03-23 2:51 ` Axel Lin [this message]
2012-03-26 9:19 ` Marek Szyprowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332471074.13074.4.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.