From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
To: Jaroslav Kysela <perex@perex.cz>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
Takashi Iwai <tiwai@suse.de>
Subject: [PATCH 6/6] sound/pci/hda: clean up CX20549 test mixer setup
Date: Thu, 05 Apr 2012 15:30:45 +0200 [thread overview]
Message-ID: <1333632645.4159.16.camel@localhost> (raw)
name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls
affecting those pins.
remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1
really select MIC1, not Mixer out for recording
"Mixer out" for recording is not a "pin", adjust comment
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 3ab7b25..801e8f2 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -931,10 +931,10 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = {
/* Output controls */
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Node 11 Playback Volume", 0x11, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Node 11 Playback Switch", 0x11, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Node 12 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Node 12 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("HP-OUT Playback Volume", 0x11, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("HP-OUT Playback Switch", 0x11, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("LINE1 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
/* Modes for retasking pin widgets */
CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT),
@@ -945,16 +945,16 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = {
/* Loopback mixer controls */
- HDA_CODEC_VOLUME("Mixer-1 Volume", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-1 Switch", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-2 Volume", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-2 Switch", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-3 Volume", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-3 Switch", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-4 Volume", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-4 Switch", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-5 Volume", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-5 Switch", 0x17, 0x4, HDA_INPUT),
+ HDA_CODEC_VOLUME("PCM Volume", 0x17, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("PCM Switch", 0x17, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("MIC1 pin Volume", 0x17, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("MIC1 pin Switch", 0x17, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE1 pin Volume", 0x17, 0x2, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE1 pin Switch", 0x17, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("HP-OUT pin Volume", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_MUTE("HP-OUT pin Switch", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD pin Volume", 0x17, 0x4, HDA_INPUT),
+ HDA_CODEC_MUTE("CD pin Switch", 0x17, 0x4, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Source",
@@ -986,10 +986,6 @@ static const struct hda_verb cxt5045_test_init_verbs[] = {
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x18, AC_VERB_SET_DIGI_CONVERT_1, 0},
- /* Start with output sum widgets muted and their output gains at min */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
/* Unmute retasking pin widget output buffers since the default
* state appears to be output. As the pin mode is changed by the
* user the pin mode control will take care of enabling the pin's
@@ -1004,11 +1000,11 @@ static const struct hda_verb cxt5045_test_init_verbs[] = {
/* Set ADC connection select to match default mixer setting (mic1
* pin)
*/
- {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x01},
/* Mute all inputs to mixer widget (even unconnected ones) */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer pin */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Mic1 pin */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* Line pin */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* HP pin */
--
1.7.9.1
reply other threads:[~2012-04-05 13:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333632645.4159.16.camel@localhost \
--to=kernel@mkarcher.dialup.fu-berlin.de \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.