From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001857]: regression in snd-cs4281 in recent 2.6.16-rcX kernels
Date: Fri, 7 Apr 2006 13:11:45 +0200 [thread overview]
Message-ID: <1333fbbd216b5181899f32a952cf3a8f@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1857>
======================================================================
Reported By: hoffmajs
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1857
Category: PCI - cs4281
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Ubuntu (Dapper)
Kernel Version: 2.6.16-rc4
======================================================================
Date Submitted: 02-19-2006 06:11 CET
Last Modified: 04-07-2006 13:11 CEST
======================================================================
Summary: regression in snd-cs4281 in recent 2.6.16-rcX
kernels
Description:
In the recent 2.6.16-rc kernels snd-cs4281 broke for me.
(I think since 2.6.16-rc2, but Im not sure atm. In 2.6.15 the card works
fine.)
# > modprobe snd-cs4281
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
never read ISV3 and ISV4 from AC'97
ACPI: PCI interrupt for device 0000:00:08.0 disabled
CS4281: probe of 0000:00:08.0 failed with error -5
and no soundcard is found.
If you need more info or want me to test something, please say so.
kind regards,
Jens
======================================================================
----------------------------------------------------------------------
julienbras - 04-05-06 10:33
----------------------------------------------------------------------
same problem on a debian sid, IBM Thinkpad X20.
The switch from 2.6.15 to 2.6.16 broke the sound
LSPCI output:
julien@x20:~$ sudo lspci -vs 00:0b
0000:00:0b.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI
Audio (rev 01)
Subsystem: IBM: Unknown device 0183
Flags: medium devsel, IRQ 11
Memory at f4010000 (32-bit, non-prefetchable) [size=4K]
Memory at f4000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
DMESG output:
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
never read ISV3 and ISV4 from AC'97
ACPI: PCI interrupt for device 0000:00:0b.0 disabled
CS4281: probe of 0000:00:0b.0 failed with error -5
----------------------------------------------------------------------
Mo6eB - 04-07-06 13:11
----------------------------------------------------------------------
Also happens here.
Debian unstable, custom-compiled kernel, as well as the precompiled kernel
in the Debian repository don't work.
Fujitsu/Siemens Lifebook C-4345
lspci -vs 00:08
0000:00:08.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI
Audio (rev 01)
Subsystem: Fujitsu Limited. Crystal CS4281 PCI Audio
Flags: medium devsel, IRQ 5
Memory at fc010000 (32-bit, non-prefetchable) [size=4K]
Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
dmesg on a kernel, compiled with support for ACPI:
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
ALSA sound/pci/cs4281.c:1577: never read ISV3 and ISV4 from AC'97
ACPI: PCI interrupt for device 0000:00:08.0 disabled
CS4281: probe of 0000:00:08.0 failed with error -5
dmesg on a kernel, compiled without support for ACPI:
PCI: Found IRQ 5 for device 0000:00:08.0
ALSA sound/pci/cs4281.c:1577: never read ISV3 and ISV4 from AC'97
CS4281: probe of 0000:00:08.0 failed with error -5
It doesn't seem like ACPI is the problem. The second kernel was compiled
with no support whatsoever for power management. If you need me to try
some specific configuration, do say so.
Issue History
Date Modified Username Field Change
======================================================================
02-19-06 06:11 hoffmajs New Issue
02-19-06 06:11 hoffmajs Distribution => Ubuntu (Dapper)
02-19-06 06:11 hoffmajs Kernel Version => 2.6.16-rc4
03-02-06 16:05 tiwai Note Added: 0008319
04-05-06 10:33 julienbras Note Added: 0009119
04-07-06 13:11 Mo6eB Note Added: 0009138
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
next reply other threads:[~2006-04-07 11:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-07 11:11 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-04-10 14:47 [ALSA - driver 0001857]: regression in snd-cs4281 in recent 2.6.16-rcX kernels bugtrack
2006-04-09 10:29 bugtrack
2006-04-07 17:16 bugtrack
2006-04-05 8:33 bugtrack
2006-03-02 15:05 bugtrack
2006-02-19 5:11 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333fbbd216b5181899f32a952cf3a8f@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.