From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH RFT] regulator: rc5t583: Use generic regmap enable/disable operations
Date: Tue, 17 Apr 2012 14:11:31 +0800 [thread overview]
Message-ID: <1334643091.22780.2.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/rc5t583-regulator.c | 63 +++-----------------------------
1 files changed, 6 insertions(+), 57 deletions(-)
diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c
index b567c9e..81a74d1 100644
--- a/drivers/regulator/rc5t583-regulator.c
+++ b/drivers/regulator/rc5t583-regulator.c
@@ -37,8 +37,6 @@ struct rc5t583_regulator_info {
int deepsleep_id;
/* Regulator register address.*/
- uint8_t reg_en_reg;
- uint8_t en_bit;
uint8_t reg_disc_reg;
uint8_t disc_bit;
uint8_t vout_reg;
@@ -67,56 +65,6 @@ struct rc5t583_regulator {
struct regulator_dev *rdev;
};
-static int rc5t583_reg_is_enabled(struct regulator_dev *rdev)
-{
- struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
- uint8_t control;
- int ret;
-
- ret = rc5t583_read(reg->mfd->dev, ri->reg_en_reg, &control);
- if (ret < 0) {
- dev_err(&rdev->dev,
- "Error in reading the control register 0x%02x\n",
- ri->reg_en_reg);
- return ret;
- }
- return !!(control & BIT(ri->en_bit));
-}
-
-static int rc5t583_reg_enable(struct regulator_dev *rdev)
-{
- struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
- int ret;
-
- ret = rc5t583_set_bits(reg->mfd->dev, ri->reg_en_reg,
- (1 << ri->en_bit));
- if (ret < 0) {
- dev_err(&rdev->dev,
- "Error in setting bit of STATE register 0x%02x\n",
- ri->reg_en_reg);
- return ret;
- }
- return ret;
-}
-
-static int rc5t583_reg_disable(struct regulator_dev *rdev)
-{
- struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
- int ret;
-
- ret = rc5t583_clear_bits(reg->mfd->dev, ri->reg_en_reg,
- (1 << ri->en_bit));
- if (ret < 0)
- dev_err(&rdev->dev,
- "Error in clearing bit of STATE register 0x%02x\n",
- ri->reg_en_reg);
-
- return ret;
-}
-
static int rc5t583_list_voltage(struct regulator_dev *rdev, unsigned selector)
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
@@ -193,9 +141,9 @@ static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
static struct regulator_ops rc5t583_ops = {
- .is_enabled = rc5t583_reg_is_enabled,
- .enable = rc5t583_reg_enable,
- .disable = rc5t583_reg_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
.enable_time = rc5t583_regulator_enable_time,
.get_voltage_sel = rc5t583_get_voltage_sel,
.set_voltage = rc5t583_set_voltage,
@@ -206,8 +154,6 @@ static struct regulator_ops rc5t583_ops = {
#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
_vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \
{ \
- .reg_en_reg = RC5T583_REG_##_en_reg, \
- .en_bit = _en_bit, \
.reg_disc_reg = RC5T583_REG_##_disc_reg, \
.disc_bit = _disc_bit, \
.vout_reg = RC5T583_REG_##_id##DAC, \
@@ -226,6 +172,8 @@ static struct regulator_ops rc5t583_ops = {
.ops = &rc5t583_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
+ .enable_reg = RC5T583_REG_##_en_reg, \
+ .enable_mask = BIT(_en_bit), \
}, \
}
@@ -304,6 +252,7 @@ skip_ext_pwr_config:
config.dev = &pdev->dev;
config.init_data = reg_data;
config.driver_data = reg;
+ config.regmap = rc5t583->regmap;
rdev = regulator_register(&ri->desc, &config);
if (IS_ERR(rdev)) {
--
1.7.5.4
next reply other threads:[~2012-04-17 6:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-17 6:11 Axel Lin [this message]
2012-04-23 12:22 ` [PATCH RFT] regulator: rc5t583: Use generic regmap enable/disable operations Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334643091.22780.2.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.