From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>,
Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/2] regulator: max8997: Convert ot use devm_kzalloc
Date: Thu, 19 Apr 2012 09:44:13 +0800 [thread overview]
Message-ID: <1334799853.2707.3.camel@phoenix> (raw)
Also simplify the error handling to start unwind from the place
regulator_register fails.
No need to check rdev[i] is NULL or not before calling regulator_unregister.
regulator_unregister is safe if rdev is NULL,
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/max8997.c | 40 +++++++++++++++-------------------------
1 files changed, 15 insertions(+), 25 deletions(-)
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 99d7cb3..20286ad 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -962,16 +962,15 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
return -ENODEV;
}
- max8997 = kzalloc(sizeof(struct max8997_data), GFP_KERNEL);
+ max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
+ GFP_KERNEL);
if (!max8997)
return -ENOMEM;
size = sizeof(struct regulator_dev *) * pdata->num_regulators;
- max8997->rdev = kzalloc(size, GFP_KERNEL);
- if (!max8997->rdev) {
- kfree(max8997);
+ max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!max8997->rdev)
return -ENOMEM;
- }
rdev = max8997->rdev;
max8997->dev = &pdev->dev;
@@ -995,7 +994,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
pdata->buck1_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
@@ -1004,7 +1003,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
pdata->buck2_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
@@ -1013,7 +1012,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
pdata->buck5_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
if (max_buck1 < max8997->buck1_vol[i])
max_buck1 = max8997->buck1_vol[i];
@@ -1046,7 +1045,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
!gpio_is_valid(pdata->buck125_gpios[2])) {
dev_err(&pdev->dev, "GPIO NOT VALID\n");
ret = -EINVAL;
- goto err_alloc;
+ goto err_out;
}
ret = gpio_request(pdata->buck125_gpios[0],
@@ -1055,7 +1054,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "Duplicated gpio request"
" on SET1\n");
else if (ret)
- goto err_alloc;
+ goto err_out;
else
gpio1set = true;
@@ -1067,7 +1066,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
else if (ret) {
if (gpio1set)
gpio_free(pdata->buck125_gpios[0]);
- goto err_alloc;
+ goto err_out;
} else
gpio2set = true;
@@ -1081,7 +1080,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
gpio_free(pdata->buck125_gpios[0]);
if (gpio2set)
gpio_free(pdata->buck125_gpios[1]);
- goto err_alloc;
+ goto err_out;
}
gpio_direction_output(pdata->buck125_gpios[0],
@@ -1150,13 +1149,9 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
return 0;
err:
- for (i = 0; i < max8997->num_regulators; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
-err_alloc:
- kfree(max8997->rdev);
- kfree(max8997);
-
+ while (--i >= 0)
+ regulator_unregister(rdev[i]);
+err_out:
return ret;
}
@@ -1167,12 +1162,7 @@ static int __devexit max8997_pmic_remove(struct platform_device *pdev)
int i;
for (i = 0; i < max8997->num_regulators; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
-
- kfree(max8997->rdev);
- kfree(max8997);
-
+ regulator_unregister(rdev[i]);
return 0;
}
--
1.7.5.4
next reply other threads:[~2012-04-19 1:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-19 1:44 Axel Lin [this message]
2012-04-19 1:47 ` [PATCH 2/2] regulator: max8998: Convert ot use devm_kzalloc Axel Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334799853.2707.3.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.