From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFT] regulator: tps65910: Convert to get_voltage_sel
Date: Wed, 09 May 2012 09:22:47 +0800 [thread overview]
Message-ID: <1336526567.14246.1.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps65910-regulator.c | 34 ++++++++-----------------------
1 files changed, 9 insertions(+), 25 deletions(-)
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 2deeb7c..6f40d36 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -578,10 +578,10 @@ static int tps65910_get_voltage_dcdc_sel(struct regulator_dev *dev)
return -EINVAL;
}
-static int tps65910_get_voltage(struct regulator_dev *dev)
+static int tps65910_get_voltage_sel(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int reg, value, id = rdev_get_id(dev), voltage = 0;
+ int reg, value, id = rdev_get_id(dev);
reg = pmic->get_ctrl_reg(id);
if (reg < 0)
@@ -608,9 +608,7 @@ static int tps65910_get_voltage(struct regulator_dev *dev)
return -EINVAL;
}
- voltage = pmic->info[id]->voltage_table[value] * 1000;
-
- return voltage;
+ return value;
}
static int tps65910_get_voltage_vdd3(struct regulator_dev *dev)
@@ -618,10 +616,10 @@ static int tps65910_get_voltage_vdd3(struct regulator_dev *dev)
return 5 * 1000 * 1000;
}
-static int tps65911_get_voltage(struct regulator_dev *dev)
+static int tps65911_get_voltage_sel(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int step_mv, id = rdev_get_id(dev);
+ int id = rdev_get_id(dev);
u8 value, reg;
reg = pmic->get_ctrl_reg(id);
@@ -634,13 +632,6 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
case TPS65911_REG_LDO4:
value &= LDO1_SEL_MASK;
value >>= LDO_SEL_SHIFT;
- /* The first 5 values of the selector correspond to 1V */
- if (value < 5)
- value = 0;
- else
- value -= 4;
-
- step_mv = 50;
break;
case TPS65911_REG_LDO3:
case TPS65911_REG_LDO5:
@@ -649,23 +640,16 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
case TPS65911_REG_LDO8:
value &= LDO3_SEL_MASK;
value >>= LDO_SEL_SHIFT;
- /* The first 3 values of the selector correspond to 1V */
- if (value < 3)
- value = 0;
- else
- value -= 2;
-
- step_mv = 100;
break;
case TPS65910_REG_VIO:
value &= LDO_SEL_MASK;
value >>= LDO_SEL_SHIFT;
- return pmic->info[id]->voltage_table[value] * 1000;
+ break;
default:
return -EINVAL;
}
- return (LDO_MIN_VOLT + value * step_mv) * 1000;
+ return value;
}
static int tps65910_set_voltage_dcdc_sel(struct regulator_dev *dev,
@@ -901,7 +885,7 @@ static struct regulator_ops tps65910_ops = {
.enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
- .get_voltage = tps65910_get_voltage,
+ .get_voltage_sel = tps65910_get_voltage_sel,
.set_voltage_sel = tps65910_set_voltage_sel,
.list_voltage = tps65910_list_voltage,
};
@@ -913,7 +897,7 @@ static struct regulator_ops tps65911_ops = {
.enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
- .get_voltage = tps65911_get_voltage,
+ .get_voltage_sel = tps65911_get_voltage_sel,
.set_voltage_sel = tps65911_set_voltage_sel,
.list_voltage = tps65911_list_voltage,
};
--
1.7.5.4
next reply other threads:[~2012-05-09 1:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-09 1:22 Axel Lin [this message]
2012-05-09 8:22 ` [PATCH RFT] regulator: tps65910: Convert to get_voltage_sel Laxman Dewangan
2012-05-09 8:52 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336526567.14246.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.