From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] mx5: Rename mx51_fb_init()
Date: Thu, 10 May 2012 22:07:34 -0300 [thread overview]
Message-ID: <1336698455-11921-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1336698455-11921-1-git-send-email-festevam@gmail.com>
From: Fabio Estevam <fabio.estevam@freescale.com>
The ipuv3 driver is currently only used on mx51, but it can be extended to work
on mx53 and mx6 as well.
Rename mx51_fb_init(), so that it can be used by other SoCs.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
board/freescale/mx51evk/mx51evk.c | 2 +-
board/ttcontrol/vision2/vision2.c | 2 +-
drivers/video/mxc_ipuv3_fb.c | 2 +-
include/ipu_pixfmt.h | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index bc7f057..514a7ac 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -502,7 +502,7 @@ void lcd_iomux(void)
void lcd_enable(void)
{
- int ret = mx51_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
+ int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
if (ret)
printf("LCD cannot be configured: %d\n", ret);
}
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index 282de95..d68bef7 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -604,7 +604,7 @@ void lcd_enable(void)
gpio_set_value(2, 1);
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
- ret = mx51_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666);
+ ret = ipuv3_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666);
if (ret)
puts("LCD cannot be configured\n");
}
diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c
index 1bee54c..c38e22d 100644
--- a/drivers/video/mxc_ipuv3_fb.c
+++ b/drivers/video/mxc_ipuv3_fb.c
@@ -599,7 +599,7 @@ void video_set_lut(unsigned int index, /* color number */
return;
}
-int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt)
+int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt)
{
gmode = mode;
gdisp = disp;
diff --git a/include/ipu_pixfmt.h b/include/ipu_pixfmt.h
index 656f605..0019898 100644
--- a/include/ipu_pixfmt.h
+++ b/include/ipu_pixfmt.h
@@ -76,6 +76,6 @@
#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */
#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */
-int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
+int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
#endif
--
1.7.1
next prev parent reply other threads:[~2012-05-11 1:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-11 1:07 [U-Boot] [PATCH 1/3] mx53: Change IPU_CTRL_BASE_ADDR definition Fabio Estevam
2012-05-11 1:07 ` Fabio Estevam [this message]
2012-05-11 1:50 ` [U-Boot] [PATCH 2/3] mx5: Rename mx51_fb_init() Liu Hui-R64343
2012-05-25 8:42 ` Anatolij Gustschin
2012-05-11 1:07 ` [U-Boot] [PATCH 3/3] mx53loco: Add LCD support Fabio Estevam
2012-05-11 1:50 ` Liu Hui-R64343
2012-05-25 8:43 ` Anatolij Gustschin
2012-05-11 1:49 ` [U-Boot] [PATCH 1/3] mx53: Change IPU_CTRL_BASE_ADDR definition Liu Hui-R64343
2012-05-11 10:46 ` Stefano Babic
2012-05-11 18:31 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336698455-11921-2-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.