From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH RFT 1/2] regulator: rc5t583: Convert to regulator_list_voltage_linear()
Date: Mon, 14 May 2012 10:54:46 +0800 [thread overview]
Message-ID: <1336964086.24732.7.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/rc5t583-regulator.c | 28 +++++++++-------------------
1 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c
index 7951260..f5d8537 100644
--- a/drivers/regulator/rc5t583-regulator.c
+++ b/drivers/regulator/rc5t583-regulator.c
@@ -41,9 +41,7 @@ struct rc5t583_regulator_info {
uint8_t deepsleep_reg;
/* Chip constraints on regulator behavior */
- int min_uV;
int max_uV;
- int step_uV;
/* Regulator specific turn-on delay and voltage settling time*/
int enable_uv_per_us;
@@ -62,24 +60,16 @@ struct rc5t583_regulator {
struct regulator_dev *rdev;
};
-static int rc5t583_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
- return ri->min_uV + (ri->step_uV * selector);
-}
-
static int rc5t583_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
int sel, ret;
- if (min_uV < ri->min_uV)
- min_uV = ri->min_uV;
+ if (min_uV < rdev->desc->min_uV)
+ min_uV = rdev->desc->min_uV;
- sel = DIV_ROUND_UP(min_uV - ri->min_uV, ri->step_uV);
+ sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (sel >= rdev->desc->n_voltages) {
dev_err(&rdev->dev, "Invalid selector 0x%02x\n", sel);
@@ -100,7 +90,7 @@ static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
int vsel = regulator_get_voltage_sel_regmap(rdev);
- int curr_uV = rc5t583_list_voltage(rdev, vsel);
+ int curr_uV = regulator_list_voltage_linear(rdev, vsel);
return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
}
@@ -110,12 +100,12 @@ static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
int old_uV, new_uV;
- old_uV = rc5t583_list_voltage(rdev, old_selector);
+ old_uV = regulator_list_voltage_linear(rdev, old_selector);
if (old_uV < 0)
return old_uV;
- new_uV = rc5t583_list_voltage(rdev, new_selector);
+ new_uV = regulator_list_voltage_linear(rdev, new_selector);
if (new_uV < 0)
return new_uV;
@@ -131,7 +121,7 @@ static struct regulator_ops rc5t583_ops = {
.enable_time = rc5t583_regulator_enable_time,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage = rc5t583_set_voltage,
- .list_voltage = rc5t583_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.set_voltage_time_sel = rc5t583_set_voltage_time_sel,
};
@@ -141,9 +131,7 @@ static struct regulator_ops rc5t583_ops = {
.reg_disc_reg = RC5T583_REG_##_disc_reg, \
.disc_bit = _disc_bit, \
.deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \
- .min_uV = _min_mv * 1000, \
.max_uV = _max_mv * 1000, \
- .step_uV = _step_uV, \
.enable_uv_per_us = _enable_mv * 1000, \
.change_uv_per_us = 40 * 1000, \
.deepsleep_id = RC5T583_DS_##_id, \
@@ -158,6 +146,8 @@ static struct regulator_ops rc5t583_ops = {
.vsel_mask = _vout_mask, \
.enable_reg = RC5T583_REG_##_en_reg, \
.enable_mask = BIT(_en_bit), \
+ .min_uV = _min_mv * 1000, \
+ .uV_step = _step_uV, \
}, \
}
--
1.7.5.4
next reply other threads:[~2012-05-14 2:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-14 2:54 Axel Lin [this message]
2012-05-14 2:55 ` [PATCH RFT 2/2] regulator: rc5t583: Convert to regulator_set_voltage_sel_regmap and regulator_map_voltage_linear Axel Lin
2012-05-14 16:36 ` [PATCH RFT 1/2] regulator: rc5t583: Convert to regulator_list_voltage_linear() Laxman Dewangan
2012-05-14 16:51 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336964086.24732.7.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.