From: Max Filippov <jcmvbkbc@gmail.com>
To: qemu-devel@nongnu.org
Cc: Blue Swirl <blauwirbel@gmail.com>,
Max Filippov <jcmvbkbc@gmail.com>,
Anthony Liguori <aliguori@us.ibm.com>
Subject: [Qemu-devel] [PATCH 1.1 6/6] target-xtensa: add MMU pagewalking tests
Date: Sun, 27 May 2012 18:34:54 +0400 [thread overview]
Message-ID: <1338129294-16742-7-git-send-email-jcmvbkbc@gmail.com> (raw)
In-Reply-To: <1338129294-16742-1-git-send-email-jcmvbkbc@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
---
tests/tcg/xtensa/test_mmu.S | 221 ++++++++++++++++++++++++++++++++++++++++---
1 files changed, 207 insertions(+), 14 deletions(-)
diff --git a/tests/tcg/xtensa/test_mmu.S b/tests/tcg/xtensa/test_mmu.S
index 52d5774..5d87fbb 100644
--- a/tests/tcg/xtensa/test_mmu.S
+++ b/tests/tcg/xtensa/test_mmu.S
@@ -293,26 +293,219 @@ test store_prohibited
assert eq, a2, a3
test_end
-test dtlb_autoload
- set_vector kernel, 0
-
- movi a2, 0xd4000000
+/* Set up page table entry vaddr->paddr, ring=pte_ring, attr=pte_attr
+ * and DTLB way 7 to cover this PTE, ring=pt_ring, attr=pt_attr
+ */
+.macro pt_setup pt_ring, pt_attr, pte_ring, vaddr, paddr, pte_attr
+ movi a2, 0x80000000
wsr a2, ptevaddr
- movi a3, 0x00001013
- s32i a3, a2, 4
+
+ movi a3, 0x80000007 | (((\vaddr) >> 10) & 0xfffff000) /* way 7 */
+ movi a4, 0x04000003 | ((\pt_ring) << 4) /* PADDR 64M */
+ wdtlb a4, a3
+ isync
+
+ movi a3, ((\paddr) & 0xfffff000) | ((\pte_ring) << 4) | (\pte_attr)
+ movi a1, ((\vaddr) >> 12) << 2
+ add a2, a1, a2
+ s32i a3, a2, 0
+
+ movi a3, 0x80000007 | (((\vaddr) >> 10) & 0xfffff000) /* way 7 */
+ movi a4, 0x04000000 | ((\pt_ring) << 4) | (\pt_attr) /* PADDR 64M */
+ wdtlb a4, a3
+ isync
+
+ movi a3, (\vaddr)
+.endm
+
+/* out: PS.RING=ring, PS.EXCM=excm, a3=vaddr */
+.macro go_ring ring, excm, vaddr
+ movi a3, 10f
+ pitlb a3, a3
+ ritlb1 a2, a3
+ movi a1, 0x10
+ or a2, a2, a1
+ movi a1, 0x000ff000
+ and a3, a3, a1
+ movi a1, 4
+ or a3, a3, a1
+ witlb a2, a3
+ movi a3, 10f
+ movi a1, 0x000fffff
+ and a1, a3, a1
+
+ movi a2, 0
+ wsr a2, excvaddr
+
+ movi a3, \vaddr
+ movi a2, 0x4000f | ((\ring) << 6) | ((\excm) << 4)
+ jx a1
+10:
+ wsr a2, ps
+ isync
+.endm
+
+/* in: a3 -- virtual address to test */
+.macro assert_auto_tlb
+ movi a2, 0x4000f
+ wsr a2, ps
+ isync
+ pdtlb a2, a3
+ movi a1, 0xfffff01f
+ and a2, a2, a1
+ movi a1, 0xfffff000
+ and a1, a1, a3
+ xor a1, a1, a2
+ assert gei, a1, 0x10
+ movi a2, 0x14
+ assert lt, a1, a2
+.endm
+
+/* in: a3 -- virtual address to test */
+.macro assert_no_auto_tlb
+ movi a2, 0x4000f
+ wsr a2, ps
+ isync
pdtlb a2, a3
movi a1, 0x10
and a1, a1, a2
assert eqi, a1, 0
- l8ui a1, a3, 0
- pdtlb a2, a3
- movi a1, 0xfffff010
- and a1, a1, a2
- movi a3, 0x00001010
- assert eq, a1, a3
- movi a1, 0xf
+.endm
+
+.macro assert_sr sr, v
+ rsr a2, \sr
+ movi a1, (\v)
+ assert eq, a1, a2
+.endm
+
+.macro assert_epc1_1m vaddr
+ movi a2, (\vaddr)
+ movi a1, 0xfffff
and a1, a1, a2
- assert lti, a1, 4
+ rsr a2, epc1
+ assert eq, a1, a2
+.endm
+
+test dtlb_autoload
+ set_vector kernel, 0
+
+ pt_setup 0, 3, 1, 0x1000, 0x1000, 3
+ assert_no_auto_tlb
+
+ l8ui a1, a3, 0
+
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+test_end
+
+test autoload_load_store_privilege
+ set_vector kernel, 0
+ set_vector double, 2f
+
+ pt_setup 0, 3, 0, 0x2000, 0x2000, 3
+ movi a3, 0x2004
+ assert_no_auto_tlb
+
+ movi a2, 0x4005f /* ring 1 + excm => cring == 0 */
+ wsr a2, ps
+ isync
+1:
+ l32e a2, a3, -4 /* ring used */
+ test_fail
+2:
+ rsr a2, excvaddr
+ addi a1, a3, -4
+ assert eq, a1, a2
+
+ assert_auto_tlb
+ assert_sr depc, 1b
+ assert_sr exccause, 26
+test_end
+
+test autoload_pte_load_prohibited
+ set_vector kernel, 2f
+
+ pt_setup 0, 3, 0, 0x3000, 0, 0xc
+ assert_no_auto_tlb
+1:
+ l32i a2, a3, 0
+ test_fail
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+ assert_sr epc1, 1b
+ assert_sr exccause, 28
+test_end
+
+test autoload_pt_load_prohibited
+ set_vector kernel, 2f
+
+ pt_setup 0, 0xc, 0, 0x4000, 0x4000, 3
+ assert_no_auto_tlb
+1:
+ l32i a2, a3, 0
+ test_fail
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_no_auto_tlb
+ assert_sr epc1, 1b
+ assert_sr exccause, 24
+test_end
+
+test autoload_pt_privilege
+ set_vector kernel, 2f
+ pt_setup 0, 3, 1, 0x5000, 0, 3
+ go_ring 1, 0, 0x5001
+
+ l8ui a2, a3, 0
+1:
+ syscall
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+ assert_epc1_1m 1b
+ assert_sr exccause, 1
+test_end
+
+test autoload_pte_privilege
+ set_vector kernel, 2f
+ pt_setup 0, 3, 0, 0x6000, 0, 3
+ go_ring 1, 0, 0x6001
+1:
+ l8ui a2, a3, 0
+ syscall
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_auto_tlb
+ assert_epc1_1m 1b
+ assert_sr exccause, 26
+test_end
+
+test autoload_3_level_pt
+ set_vector kernel, 2f
+ pt_setup 1, 3, 1, 0x00400000, 0, 3
+ pt_setup 1, 3, 1, 0x80001000, 0x2000000, 3
+ go_ring 1, 0, 0x00400001
+1:
+ l8ui a2, a3, 0
+ syscall
+2:
+ rsr a2, excvaddr
+ assert eq, a2, a3
+
+ assert_no_auto_tlb
+ assert_epc1_1m 1b
+ assert_sr exccause, 24
test_end
test_suite_end
--
1.7.7.6
next prev parent reply other threads:[~2012-05-27 14:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-27 14:34 [Qemu-devel] [PULL 1.1 0/6] target-xtensa MMU fixes Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 1/6] target-xtensa: flush TLB page for new MMU mapping Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 2/6] target-xtensa: update EXCVADDR in case of page table lookup Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 3/6] target-xtensa: extract TLB entry setting method Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 4/6] target-xtensa: update autorefill TLB entries conditionally Max Filippov
2012-05-27 14:34 ` [Qemu-devel] [PATCH 1.1 5/6] target-xtensa: control page table lookup explicitly Max Filippov
2012-05-27 14:34 ` Max Filippov [this message]
2012-05-27 14:54 ` [Qemu-devel] [PULL 1.1 0/6] target-xtensa MMU fixes Andreas Färber
2012-05-27 15:27 ` Max Filippov
2012-06-09 11:30 ` Blue Swirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338129294-16742-7-git-send-email-jcmvbkbc@gmail.com \
--to=jcmvbkbc@gmail.com \
--cc=aliguori@us.ibm.com \
--cc=blauwirbel@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.