From: Richard Purdie <richard.purdie@linuxfoundation.org>
To: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH v2] dbus: update to version 1.4.20
Date: Wed, 30 May 2012 17:25:34 +0100 [thread overview]
Message-ID: <1338395134.20169.158.camel@ted> (raw)
In-Reply-To: <1338361866-4176-1-git-send-email-radu.moisan@intel.com>
On Wed, 2012-05-30 at 10:11 +0300, Radu Moisan wrote:
> Unstable version 1.5.12 also supported
>
> Signed-off-by: Radu Moisan <radu.moisan@intel.com>
> ---
> .../dbus/{dbus-1.4.16 => dbus-1.4.20}/dbus-1.init | 0
> .../dbus/{dbus-1.4.16 => dbus-1.4.20}/tmpdir.patch | 0
> meta/recipes-core/dbus/dbus-1.5.12/dbus-1.init | 121 ++++++++++++++++++++
> meta/recipes-core/dbus/dbus-1.5.12/tmpdir.patch | 44 +++++++
> meta/recipes-core/dbus/dbus_1.4.16.bb | 7 --
> meta/recipes-core/dbus/dbus_1.4.20.bb | 6 +
> meta/recipes-core/dbus/dbus_1.5.12.bb | 9 ++
> 7 files changed, 180 insertions(+), 7 deletions(-)
> rename meta/recipes-core/dbus/{dbus-1.4.16 => dbus-1.4.20}/dbus-1.init (100%)
> rename meta/recipes-core/dbus/{dbus-1.4.16 => dbus-1.4.20}/tmpdir.patch (100%)
> create mode 100644 meta/recipes-core/dbus/dbus-1.5.12/dbus-1.init
> create mode 100644 meta/recipes-core/dbus/dbus-1.5.12/tmpdir.patch
> delete mode 100644 meta/recipes-core/dbus/dbus_1.4.16.bb
> create mode 100644 meta/recipes-core/dbus/dbus_1.4.20.bb
> create mode 100644 meta/recipes-core/dbus/dbus_1.5.12.bb
>
> diff --git a/meta/recipes-core/dbus/dbus-1.4.16/dbus-1.init b/meta/recipes-core/dbus/dbus-1.4.20/dbus-1.init
> similarity index 100%
> rename from meta/recipes-core/dbus/dbus-1.4.16/dbus-1.init
> rename to meta/recipes-core/dbus/dbus-1.4.20/dbus-1.init
> diff --git a/meta/recipes-core/dbus/dbus-1.4.16/tmpdir.patch b/meta/recipes-core/dbus/dbus-1.4.20/tmpdir.patch
> similarity index 100%
> rename from meta/recipes-core/dbus/dbus-1.4.16/tmpdir.patch
> rename to meta/recipes-core/dbus/dbus-1.4.20/tmpdir.patch
> diff --git a/meta/recipes-core/dbus/dbus-1.5.12/dbus-1.init b/meta/recipes-core/dbus/dbus-1.5.12/dbus-1.init
> new file mode 100644
> index 0000000..4abc4cb
> --- /dev/null
> +++ b/meta/recipes-core/dbus/dbus-1.5.12/dbus-1.init
> @@ -0,0 +1,121 @@
> +#! /bin/sh
> +### BEGIN INIT INFO
> +# Provides: dbus
> +# Required-Start: $remote_fs $syslog
> +# Required-Stop: $remote_fs $syslog
> +# Default-Start: 2 3 4 5
> +# Default-Stop: 1
> +# Short-Description: D-Bus systemwide message bus
> +# Description: D-Bus is a simple interprocess messaging system, used
> +# for sending messages between applications.
> +### END INIT INFO
> +#
> +# -*- coding: utf-8 -*-
> +# Debian init.d script for D-BUS
> +# Copyright © 2003 Colin Walters <walters@debian.org>
> +
> +set -e
> +
> +DAEMON=/usr/bin/dbus-daemon
> +NAME=dbus
> +DAEMONUSER=messagebus
> +PIDDIR=/var/run/dbus
> +PIDFILE=$PIDDIR/pid
> +UUIDDIR=/var/lib/dbus
> +DESC="system message bus"
> +EVENTDIR=/etc/dbus-1/event.d
> +
> +test -x $DAEMON || exit 0
> +
> +# Source defaults file; edit that file to configure this script.
> +ENABLED=1
> +PARAMS=""
> +if [ -e /etc/default/dbus ]; then
> + . /etc/default/dbus
> +fi
> +
> +test "$ENABLED" != "0" || exit 0
> +
> +start_it_up()
> +{
> + if [ ! -d $PIDDIR ]; then
> + mkdir -p $PIDDIR
> + chown $DAEMONUSER $PIDDIR
> + chgrp $DAEMONUSER $PIDDIR
> + fi
> + if [ -e $PIDFILE ]; then
> + PIDDIR=/proc/$(cat $PIDFILE)
> + if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
> + echo "$DESC already started; not starting."
> + else
> + echo "Removing stale PID file $PIDFILE."
> + rm -f $PIDFILE
> + fi
> + fi
> +
> + if [ ! -d $UUIDDIR ]; then
> + mkdir -p $UUIDDIR
> + chown $DAEMONUSER $UUIDDIR
> + chgrp $DAEMONUSER $UUIDDIR
> + fi
> +
> + dbus-uuidgen --ensure
> +
> + echo -n "Starting $DESC: "
> + start-stop-daemon --start --quiet --pidfile $PIDFILE \
> + --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
> + echo "$NAME."
> + if [ -d $EVENTDIR ]; then
> + run-parts --arg=start $EVENTDIR
> + fi
> +}
> +
> +shut_it_down()
> +{
> + if [ -d $EVENTDIR ]; then
> + # TODO: --reverse when busybox supports it
> + run-parts --arg=stop $EVENTDIR
> + fi
> + echo -n "Stopping $DESC: "
> + start-stop-daemon --stop --quiet --pidfile $PIDFILE \
> + --user $DAEMONUSER
> + # We no longer include these arguments so that start-stop-daemon
> + # can do its job even given that we may have been upgraded.
> + # We rely on the pidfile being sanely managed
> + # --exec $DAEMON -- --system $PARAMS
> + echo "$NAME."
> + rm -f $PIDFILE
> +}
> +
> +reload_it()
> +{
> + echo -n "Reloading $DESC config: "
> + dbus-send --print-reply --system --type=method_call \
> + --dest=org.freedesktop.DBus \
> + / org.freedesktop.DBus.ReloadConfig > /dev/null
> + # hopefully this is enough time for dbus to reload it's config file.
> + echo "done."
> +}
> +
> +case "$1" in
> + start)
> + start_it_up
> + ;;
> + stop)
> + shut_it_down
> + ;;
> + reload|force-reload)
> + reload_it
> + ;;
> + restart)
> + shut_it_down
> + sleep 1
> + start_it_up
> + ;;
> + *)
> + echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
> + exit 1
> + ;;
> +esac
> +
> +exit 0
> diff --git a/meta/recipes-core/dbus/dbus-1.5.12/tmpdir.patch b/meta/recipes-core/dbus/dbus-1.5.12/tmpdir.patch
> new file mode 100644
> index 0000000..bf086e1
> --- /dev/null
> +++ b/meta/recipes-core/dbus/dbus-1.5.12/tmpdir.patch
> @@ -0,0 +1,44 @@
> +From 5105fedd7fa13dadd2d0d864fb77873b83b79a4b Mon Sep 17 00:00:00 2001
> +From: Koen Kooi <koen@dominion.thruhere.net>
> +Date: Thu, 23 Jun 2011 13:52:09 +0200
> +Subject: [PATCH] buildsys: hardcode socketdir to /tmp
> +
> +the TMPDIR env var isn't always pointing to the right target path
> +
> +Upstream-Status: Inappropriate [embedded]
> +
> +Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> +
> +Original comment:
> +
> + avoid to check tmp dir at build time. instead uses hard coded /tmp here
> + comment added by Kevin Tian <kevin.tian@intel.com>
> +---
> + configure.ac | 11 +----------
> + 1 files changed, 1 insertions(+), 10 deletions(-)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 408054b..6d26180 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -1483,16 +1483,7 @@ AC_SUBST(TEST_LAUNCH_HELPER_BINARY)
> + AC_DEFINE_UNQUOTED(DBUS_TEST_LAUNCH_HELPER_BINARY, "$TEST_LAUNCH_HELPER_BINARY",
> + [Full path to the launch helper test program in the builddir])
> +
> +-#### Find socket directories
> +-if ! test -z "$TMPDIR" ; then
> +- DEFAULT_SOCKET_DIR=$TMPDIR
> +-elif ! test -z "$TEMP" ; then
> +- DEFAULT_SOCKET_DIR=$TEMP
> +-elif ! test -z "$TMP" ; then
> +- DEFAULT_SOCKET_DIR=$TMP
> +-else
> +- DEFAULT_SOCKET_DIR=/tmp
> +-fi
> ++DEFAULT_SOCKET_DIR=/tmp
> +
> + DEFAULT_SOCKET_DIR=`echo $DEFAULT_SOCKET_DIR | sed 's/+/%2B/g'`
> +
> +--
> +1.6.6.1
> +
> diff --git a/meta/recipes-core/dbus/dbus_1.4.16.bb b/meta/recipes-core/dbus/dbus_1.4.16.bb
> deleted file mode 100644
> index 3cf8bb8..0000000
> --- a/meta/recipes-core/dbus/dbus_1.4.16.bb
> +++ /dev/null
> @@ -1,7 +0,0 @@
> -include dbus.inc
> -
> -PR = "${INC_PR}.0"
> -
> -SRC_URI[md5sum] = "44a2a10678e7e50460879c3eb4453a65"
> -SRC_URI[sha256sum] = "1d8ee6262f8cc2148f06578eee522c755ba0896206b3464ca9bdc84f411b29c6"
> -
> diff --git a/meta/recipes-core/dbus/dbus_1.4.20.bb b/meta/recipes-core/dbus/dbus_1.4.20.bb
> new file mode 100644
> index 0000000..1df49b7
> --- /dev/null
> +++ b/meta/recipes-core/dbus/dbus_1.4.20.bb
> @@ -0,0 +1,6 @@
> +include dbus.inc
> +
> +PR = "${INC_PR}.0"
> +
> +RC_URI[md5sum] = "79eca2f2c1894ac347acce128314428b"
There is a typo here...
Cheers,
Richard
> +SRC_URI[sha256sum] = "103bdcd261a13140730b5fa69f56a98ab5c89ba3f0116ea62fcfd639520d5aaf"
> diff --git a/meta/recipes-core/dbus/dbus_1.5.12.bb b/meta/recipes-core/dbus/dbus_1.5.12.bb
> new file mode 100644
> index 0000000..f41d170
> --- /dev/null
> +++ b/meta/recipes-core/dbus/dbus_1.5.12.bb
> @@ -0,0 +1,9 @@
> +include dbus.inc
> +
> +PR = "${INC_PR}.0"
> +
> +SRC_URI[md5sum] = "ddf18c86fd86ca0d766e18a514e368fd"
> +SRC_URI[sha256sum] = "5d3e09a831259ca64b15357cfa1c60a5a7ab06ef469d5b82c2308de9cadf1094"
> +
> +DEFAULT_PREFERENCE = "-1"
> +
prev parent reply other threads:[~2012-05-30 16:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-30 7:11 [PATCH v2] dbus: update to version 1.4.20 Radu Moisan
2012-05-30 7:16 ` Radu Moisan
2012-05-30 16:25 ` Richard Purdie [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338395134.20169.158.camel@ted \
--to=richard.purdie@linuxfoundation.org \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.