All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mike Rapoport <mike@compulab.co.il>,
	Danny Huang <dahuang@nvidia.com>, Liam Girdwood <lrg@ti.com>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH RFT] regulator: tps6586x: Convert to regulator_list_voltage_table
Date: Tue, 05 Jun 2012 22:52:06 +0800	[thread overview]
Message-ID: <1338907926.5581.1.camel@phoenix> (raw)

Also adds tps6586x_ldo0_voltages mapping table for LDO0, so we can remove the
hack in tps6586x_list_voltage() and convert it to regulator_list_voltage_table.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 drivers/regulator/tps6586x-regulator.c |   61 +++++++++++++-------------------
 1 file changed, 25 insertions(+), 36 deletions(-)

diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index c0a2145..c0ac241 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -63,8 +63,6 @@ struct tps6586x_regulator {
 	int enable_bit[2];
 	int enable_reg[2];
 
-	int *voltages;
-
 	/* for DVM regulators */
 	int go_reg;
 	int go_bit;
@@ -75,19 +73,6 @@ static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
 	return rdev_get_dev(rdev)->parent->parent;
 }
 
-static int tps6586x_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
-	struct tps6586x_regulator *info = rdev_get_drvdata(rdev);
-	int rid = rdev_get_id(rdev);
-
-	/* LDO0 has minimal voltage 1.2V rather than 1.25V */
-	if ((rid == TPS6586X_ID_LDO_0) && (selector == 0))
-		return (info->voltages[0] - 50) * 1000;
-
-	return info->voltages[selector] * 1000;
-}
-
-
 static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
 				    unsigned selector)
 {
@@ -168,7 +153,7 @@ static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
 }
 
 static struct regulator_ops tps6586x_regulator_ops = {
-	.list_voltage = tps6586x_list_voltage,
+	.list_voltage = regulator_list_voltage_table,
 	.get_voltage_sel = tps6586x_get_voltage_sel,
 	.set_voltage_sel = tps6586x_set_voltage_sel,
 
@@ -177,29 +162,33 @@ static struct regulator_ops tps6586x_regulator_ops = {
 	.disable = tps6586x_regulator_disable,
 };
 
-static int tps6586x_ldo_voltages[] = {
-	1250, 1500, 1800, 2500, 2700, 2850, 3100, 3300,
+static const unsigned int tps6586x_ldo0_voltages[] = {
+	1200000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
+};
+
+static const unsigned int tps6586x_ldo4_voltages[] = {
+	1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
+	1900000, 1925000, 1950000, 1975000, 2000000, 2025000, 2050000, 2075000,
+	2100000, 2125000, 2150000, 2175000, 2200000, 2225000, 2250000, 2275000,
+	2300000, 2325000, 2350000, 2375000, 2400000, 2425000, 2450000, 2475000,
 };
 
-static int tps6586x_ldo4_voltages[] = {
-	1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
-	1900, 1925, 1950, 1975, 2000, 2025, 2050, 2075,
-	2100, 2125, 2150, 2175, 2200, 2225, 2250, 2275,
-	2300, 2325, 2350, 2375, 2400, 2425, 2450, 2475,
+static const unsigned int tps6586x_ldo_voltages[] = {
+	1250000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
 };
 
-static int tps6586x_sm2_voltages[] = {
-	3000, 3050, 3100, 3150, 3200, 3250, 3300, 3350,
-	3400, 3450, 3500, 3550, 3600, 3650, 3700, 3750,
-	3800, 3850, 3900, 3950, 4000, 4050, 4100, 4150,
-	4200, 4250, 4300, 4350, 4400, 4450, 4500, 4550,
+static const unsigned int tps6586x_sm2_voltages[] = {
+	3000000, 3050000, 3100000, 3150000, 3200000, 3250000, 3300000, 3350000,
+	3400000, 3450000, 3500000, 3550000, 3600000, 3650000, 3700000, 3750000,
+	3800000, 3850000, 3900000, 3950000, 4000000, 4050000, 4100000, 4150000,
+	4200000, 4250000, 4300000, 4350000, 4400000, 4450000, 4500000, 4550000,
 };
 
-static int tps6586x_dvm_voltages[] = {
-	 725,  750,  775,  800,  825,  850,  875,  900,
-	 925,  950,  975, 1000, 1025, 1050, 1075, 1100,
-	1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
-	1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+static const unsigned int tps6586x_dvm_voltages[] = {
+	 725000,  750000,  775000,  800000,  825000,  850000,  875000,  900000,
+	 925000,  950000,  975000, 1000000, 1025000, 1050000, 1075000, 1100000,
+	1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
+	1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
 };
 
 #define TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits,		\
@@ -210,6 +199,7 @@ static int tps6586x_dvm_voltages[] = {
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= TPS6586X_ID_##_id,				\
 		.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages),	\
+		.volt_table = tps6586x_##vdata##_voltages,		\
 		.owner	= THIS_MODULE,					\
 	},								\
 	.volt_reg	= TPS6586X_##vreg,				\
@@ -218,8 +208,7 @@ static int tps6586x_dvm_voltages[] = {
 	.enable_reg[0]	= TPS6586X_SUPPLY##ereg0,			\
 	.enable_bit[0]	= (ebit0),					\
 	.enable_reg[1]	= TPS6586X_SUPPLY##ereg1,			\
-	.enable_bit[1]	= (ebit1),					\
-	.voltages	= tps6586x_##vdata##_voltages,
+	.enable_bit[1]	= (ebit1),
 
 #define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
 	.go_reg = TPS6586X_##goreg,					\
@@ -241,7 +230,7 @@ static int tps6586x_dvm_voltages[] = {
 }
 
 static struct tps6586x_regulator tps6586x_regulator[] = {
-	TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
+	TPS6586X_LDO(LDO_0, ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
 	TPS6586X_LDO(LDO_3, ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
 	TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
 	TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
-- 
1.7.9.5




             reply	other threads:[~2012-06-05 14:52 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-05 14:52 Axel Lin [this message]
2012-06-07 23:53 ` [PATCH RFT] regulator: tps6586x: Convert to regulator_list_voltage_table Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1338907926.5581.1.camel@phoenix \
    --to=axel.lin@gmail.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dahuang@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    --cc=mike@compulab.co.il \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.