From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Graeme Gregory <gg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH v2] regulator: palmas: Slightly code change for better readability
Date: Wed, 06 Jun 2012 20:01:38 +0800 [thread overview]
Message-ID: <1338984098.5195.1.camel@phoenix> (raw)
It's a little bit hard to read that the "else" case means id == PALMAS_REG_SMPS10.
if (id != PALMAS_REG_SMPS10){
do something for the cases id != PALMAS_REG_SMPS10;
} else {
do something for the case id == PALMAS_REG_SMPS10;
}
This patch changes above syntax to switch statement.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/palmas-regulator.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index b4e10b0..112436b 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -517,7 +517,15 @@ static int palmas_smps_init(struct palmas *palmas, int id,
if (ret)
return ret;
- if (id != PALMAS_REG_SMPS10) {
+ switch (id) {
+ case PALMAS_REG_SMPS10:
+ if (reg_init->mode_sleep) {
+ reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
+ reg |= reg_init->mode_sleep <<
+ PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
+ }
+ break;
+ default:
if (reg_init->warm_reset)
reg |= PALMAS_SMPS12_CTRL_WR_S;
@@ -529,14 +537,8 @@ static int palmas_smps_init(struct palmas *palmas, int id,
reg |= reg_init->mode_sleep <<
PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
}
- } else {
- if (reg_init->mode_sleep) {
- reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
- reg |= reg_init->mode_sleep <<
- PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
- }
-
}
+
ret = palmas_smps_write(palmas, addr, reg);
if (ret)
return ret;
@@ -660,10 +662,8 @@ static __devinit int palmas_probe(struct platform_device *pdev)
pmic->desc[id].name = palmas_regs_info[id].name;
pmic->desc[id].id = id;
- if (id != PALMAS_REG_SMPS10) {
- pmic->desc[id].ops = &palmas_ops_smps;
- pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
- } else {
+ switch (id) {
+ case PALMAS_REG_SMPS10:
pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
@@ -672,6 +672,10 @@ static __devinit int palmas_probe(struct platform_device *pdev)
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
pmic->desc[id].min_uV = 3750000;
pmic->desc[id].uV_step = 1250000;
+ break;
+ default:
+ pmic->desc[id].ops = &palmas_ops_smps;
+ pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
}
pmic->desc[id].type = REGULATOR_VOLTAGE;
--
1.7.9.5
next reply other threads:[~2012-06-06 12:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 12:01 Axel Lin [this message]
2012-06-06 14:43 ` [PATCH v2] regulator: palmas: Slightly code change for better readability Graeme Gregory
2012-06-07 23:37 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338984098.5195.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=gg@slimlogic.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.