From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@stericsson.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFT 1/2] regulator: ab8500: Use regulator_list_voltage_linear for ab8500_regulator_fixed_ops
Date: Fri, 08 Jun 2012 10:27:49 +0800 [thread overview]
Message-ID: <1339122469.5794.2.camel@phoenix> (raw)
Also removes set_voltage_time_sel callback from ab8500_regulator_fixed_ops
because the voltage won't change. ( And ab8500_regulator_fixed_ops does not
implement get_voltage_sel so set_voltage_time_sel won't be called )
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/ab8500.c | 41 +++++++++--------------------------------
1 file changed, 9 insertions(+), 32 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 290c289..c931c7c 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -32,7 +32,6 @@
* @regulator_dev: regulator device
* @max_uV: maximum voltage (for variable voltage supplies)
* @min_uV: minimum voltage (for variable voltage supplies)
- * @fixed_uV: typical voltage (for fixed voltage supplies)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable regulator
@@ -48,7 +47,6 @@ struct ab8500_regulator_info {
struct regulator_dev *regulator;
int max_uV;
int min_uV;
- int fixed_uV;
u8 update_bank;
u8 update_reg;
u8 update_mask;
@@ -271,29 +269,9 @@ static struct regulator_ops ab8500_regulator_ops = {
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
-static int ab8500_fixed_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- if (info == NULL) {
- dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
- return -EINVAL;
- }
-
- return info->fixed_uV;
-}
-
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- if (info == NULL) {
- dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
- return -EINVAL;
- }
-
- return info->fixed_uV;
+ return rdev->desc->min_uV;
}
static struct regulator_ops ab8500_regulator_fixed_ops = {
@@ -301,9 +279,8 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage = ab8500_fixed_get_voltage,
- .list_voltage = ab8500_fixed_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.enable_time = ab8500_regulator_enable_time,
- .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static struct ab8500_regulator_info
@@ -408,9 +385,9 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2000000,
},
.delay = 10000,
- .fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
@@ -424,8 +401,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 3300000,
},
- .fixed_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
@@ -439,8 +416,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2000000,
},
- .fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
@@ -454,8 +431,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2050000,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
@@ -469,8 +446,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 2050000,
},
- .fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
@@ -484,8 +461,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 1800000,
},
- .fixed_uV = 1800000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
@@ -499,8 +476,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
+ .min_uV = 1200000,
},
- .fixed_uV = 1200000,
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
--
1.7.9.5
next reply other threads:[~2012-06-08 2:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-08 2:27 Axel Lin [this message]
2012-06-08 2:29 ` [PATCH RFT 2/2] regulator: ab8500: Remove min_uV and max_uV from struct ab8500_regulator_info Axel Lin
2012-06-17 14:24 ` [PATCH RFT 1/2] regulator: ab8500: Use regulator_list_voltage_linear for ab8500_regulator_fixed_ops Linus Walleij
2012-06-17 16:55 ` Mark Brown
2012-06-18 6:15 ` Linus Walleij
2012-06-18 9:38 ` Mark Brown
2012-06-17 20:05 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339122469.5794.2.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@stericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.