From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>, Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH RFT] regulator: pcf50633: Convert to regulator_set_voltage_sel_regmap and map_voltage
Date: Mon, 11 Jun 2012 14:43:57 +0800 [thread overview]
Message-ID: <1339397037.18866.1.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/pcf50633-regulator.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index 3c9d14c..092e5cb 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -100,13 +100,12 @@ static unsigned int ldo_voltage_value(u8 bits)
return 900 + (bits * 100);
}
-static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
+static int pcf50633_regulator_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
struct pcf50633 *pcf;
int regulator_id, millivolts;
- u8 volt_bits, regnr;
+ u8 volt_bits;
pcf = rdev_get_drvdata(rdev);
@@ -116,15 +115,11 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
millivolts = min_uV / 1000;
- regnr = rdev->desc->vsel_reg;
-
switch (regulator_id) {
case PCF50633_REGULATOR_AUTO:
volt_bits = auto_voltage_bits(millivolts);
break;
case PCF50633_REGULATOR_DOWN1:
- volt_bits = down_voltage_bits(millivolts);
- break;
case PCF50633_REGULATOR_DOWN2:
volt_bits = down_voltage_bits(millivolts);
break;
@@ -142,9 +137,7 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
return -EINVAL;
}
- *selector = volt_bits;
-
- return pcf50633_reg_write(pcf, regnr, volt_bits);
+ return volt_bits;
}
static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
@@ -159,8 +152,6 @@ static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
millivolts = auto_voltage_value(index);
break;
case PCF50633_REGULATOR_DOWN1:
- millivolts = down_voltage_value(index);
- break;
case PCF50633_REGULATOR_DOWN2:
millivolts = down_voltage_value(index);
break;
@@ -182,9 +173,10 @@ static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
}
static struct regulator_ops pcf50633_regulator_ops = {
- .set_voltage = pcf50633_regulator_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = pcf50633_regulator_list_voltage,
+ .map_voltage = pcf50633_regulator_map_voltage,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
--
1.7.9.5
next reply other threads:[~2012-06-11 6:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-11 6:43 Axel Lin [this message]
2012-06-17 20:06 ` [PATCH RFT] regulator: pcf50633: Convert to regulator_set_voltage_sel_regmap and map_voltage Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339397037.18866.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.