From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH RFT] regulator: wm831x-ldo: Convert to regulator_set_voltage_sel_regmap and map_voltage
Date: Tue, 12 Jun 2012 10:46:43 +0800 [thread overview]
Message-ID: <1339469203.22991.7.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/wm831x-ldo.c | 129 ++++++++++++----------------------------
1 file changed, 38 insertions(+), 91 deletions(-)
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index f23d020e9..04d8a41 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -78,13 +78,10 @@ static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
return -EINVAL;
}
-static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
- int min_uV, int max_uV,
- unsigned *selector)
+static int wm831x_gp_ldo_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = ldo->wm831x;
- int vsel, ret;
+ int volt, vsel;
if (min_uV < 900000)
vsel = 0;
@@ -94,36 +91,25 @@ static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
vsel = ((min_uV - 1700000) / 100000)
+ WM831X_GP_LDO_SELECTOR_LOW + 1;
- ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
- if (ret < 0)
- return ret;
- if (ret < min_uV || ret > max_uV)
+ volt = wm831x_gp_ldo_list_voltage(rdev, vsel);
+ if (volt < min_uV || volt > max_uV)
return -EINVAL;
- *selector = vsel;
-
- return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_ON_CONTROL;
-
- return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
- selector);
+ return vsel;
}
static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- unsigned int selector;
+ struct wm831x *wm831x = ldo->wm831x;
+ int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+ sel = wm831x_gp_ldo_map_voltage(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, sel);
}
static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
@@ -243,8 +229,9 @@ static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
static struct regulator_ops wm831x_gp_ldo_ops = {
.list_voltage = wm831x_gp_ldo_list_voltage,
+ .map_voltage = wm831x_gp_ldo_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage = wm831x_gp_ldo_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
.get_mode = wm831x_gp_ldo_get_mode,
.set_mode = wm831x_gp_ldo_set_mode,
@@ -384,13 +371,10 @@ static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
return -EINVAL;
}
-static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
- int min_uV, int max_uV,
- unsigned *selector)
+static int wm831x_aldo_map_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = ldo->wm831x;
- int vsel, ret;
+ int volt, vsel;
if (min_uV < 1000000)
vsel = 0;
@@ -400,35 +384,26 @@ static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
vsel = ((min_uV - 1700000) / 100000)
+ WM831X_ALDO_SELECTOR_LOW + 1;
- ret = wm831x_aldo_list_voltage(rdev, vsel);
- if (ret < 0)
- return ret;
- if (ret < min_uV || ret > max_uV)
+ volt = wm831x_aldo_list_voltage(rdev, vsel);
+ if (volt < min_uV || volt > max_uV)
return -EINVAL;
- *selector = vsel;
-
- return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ return vsel;
- return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV,
- selector);
}
static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- unsigned int selector;
+ struct wm831x *wm831x = ldo->wm831x;
+ int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+ sel = wm831x_aldo_map_voltage(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
- return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, sel);
}
static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
@@ -506,8 +481,9 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev)
static struct regulator_ops wm831x_aldo_ops = {
.list_voltage = wm831x_aldo_list_voltage,
+ .map_voltage = wm831x_aldo_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage = wm831x_aldo_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
.get_mode = wm831x_aldo_get_mode,
.set_mode = wm831x_aldo_set_mode,
@@ -628,47 +604,18 @@ static struct platform_driver wm831x_aldo_driver = {
#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
-static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
- int reg,
- int min_uV, int max_uV,
- unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- struct wm831x *wm831x = ldo->wm831x;
- int vsel, ret;
-
- vsel = (min_uV - 800000) / 50000;
-
- ret = regulator_list_voltage_linear(rdev, vsel);
- if (ret < 0)
- return ret;
- if (ret < min_uV || ret > max_uV)
- return -EINVAL;
-
- *selector = vsel;
-
- return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
-{
- struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
-
- return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
- selector);
-}
-
static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
- int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
- unsigned selector;
+ struct wm831x *wm831x = ldo->wm831x;
+ int sel, reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
+
+ sel = regulator_map_voltage_linear(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
- return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, sel);
}
static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
@@ -692,7 +639,7 @@ static struct regulator_ops wm831x_alive_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage = wm831x_alive_ldo_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
.get_status = wm831x_alive_ldo_get_status,
--
1.7.9.5
next reply other threads:[~2012-06-12 2:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-12 2:46 Axel Lin [this message]
2012-06-17 20:07 ` [PATCH RFT] regulator: wm831x-ldo: Convert to regulator_set_voltage_sel_regmap and map_voltage Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339469203.22991.7.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.