From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there
Date: Tue, 19 Jun 2012 15:54:34 -0700 [thread overview]
Message-ID: <1340146475-15969-1-git-send-email-trini@ti.com> (raw)
In-Reply-To: <1335480396-29478-1-git-send-email-trini@ti.com>
We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in <config_fallbacks.h> which mkconfig places after <configs/...h> in
the generated config file. This is used when a board has not set its
own table.
Signed-off-by: Tom Rini <trini@ti.com>
---
Changes in v4:
- Rebase to current master
- Catch a few more boards after auditing all users after rebase
Changes in v3:
- Only modify boards that had the default values, ignoring ones that set
slower rates too (per Wolfgang Denk)
Changes in v2:
- Create, use <config_fallbacks.h> rather than mkconfig directly for
this table (per Mike Frysinger).
---
arch/blackfin/include/asm/config.h | 3 ---
board/fads/fads.h | 2 --
include/config_fallbacks.h | 16 ++++++++++++++++
include/configs/A3000.h | 1 -
include/configs/AMX860.h | 2 --
include/configs/Adder.h | 2 --
include/configs/BMW.h | 1 -
include/configs/CPC45.h | 1 -
include/configs/CPU86.h | 2 --
include/configs/CPU87.h | 2 --
include/configs/CU824.h | 1 -
include/configs/EB+MCF-EV123.h | 1 -
include/configs/ELPT860.h | 1 -
include/configs/EP88x.h | 2 --
include/configs/ESTEEM192E.h | 4 ----
include/configs/ETX094.h | 2 --
include/configs/FADS823.h | 2 --
include/configs/FADS850SAR.h | 2 --
include/configs/FLAGADM.h | 2 --
include/configs/FPS850L.h | 2 --
include/configs/FPS860L.h | 2 --
include/configs/GEN860T.h | 10 ----------
include/configs/HIDDEN_DRAGON.h | 1 -
include/configs/IAD210.h | 2 --
include/configs/ICU862.h | 2 --
include/configs/IDS8247.h | 2 --
include/configs/IP860.h | 2 --
include/configs/IPHASE4539.h | 2 --
include/configs/ISPAN.h | 2 --
include/configs/IVML24.h | 2 --
include/configs/IVMS8.h | 2 --
include/configs/LANTEC.h | 2 --
include/configs/M5208EVBE.h | 1 -
include/configs/M52277EVB.h | 1 -
include/configs/M5235EVB.h | 1 -
include/configs/M5249EVB.h | 1 -
include/configs/M5253DEMO.h | 1 -
include/configs/M5253EVBE.h | 1 -
include/configs/M5271EVB.h | 1 -
include/configs/M5272C3.h | 1 -
include/configs/M5275EVB.h | 1 -
include/configs/M5282EVB.h | 1 -
include/configs/M53017EVB.h | 1 -
include/configs/M5329EVB.h | 1 -
include/configs/M5373EVB.h | 1 -
include/configs/M54451EVB.h | 1 -
include/configs/M54455EVB.h | 1 -
include/configs/M5475EVB.h | 1 -
include/configs/M5485EVB.h | 1 -
include/configs/MBX.h | 2 --
include/configs/MBX860T.h | 2 --
include/configs/MHPC.h | 2 --
include/configs/MOUSSE.h | 2 --
include/configs/MUSENKI.h | 1 -
include/configs/MVBLUE.h | 1 -
include/configs/MVS1.h | 2 --
include/configs/NETPHONE.h | 2 --
include/configs/NETTA.h | 2 --
include/configs/NETTA2.h | 2 --
include/configs/NETVIA.h | 2 --
include/configs/NSCU.h | 2 --
include/configs/NX823.h | 2 --
include/configs/PCIPPC2.h | 1 -
include/configs/PCIPPC6.h | 1 -
include/configs/PM826.h | 2 --
include/configs/PM828.h | 2 --
include/configs/PMC405DE.h | 4 ----
include/configs/PN62.h | 1 -
include/configs/QS823.h | 2 --
include/configs/QS850.h | 2 --
include/configs/QS860T.h | 2 --
include/configs/R360MPI.h | 2 --
include/configs/RBC823.h | 2 --
include/configs/RPXClassic.h | 2 --
include/configs/RPXlite.h | 2 --
include/configs/RPXlite_DW.h | 1 -
include/configs/RPXsuper.h | 3 ---
include/configs/RRvision.h | 2 --
include/configs/SCM.h | 2 --
include/configs/SM850.h | 2 --
include/configs/SPD823TS.h | 2 --
include/configs/SX1.h | 2 --
include/configs/SXNI855T.h | 2 --
include/configs/Sandpoint8240.h | 1 -
include/configs/Sandpoint8245.h | 1 -
include/configs/TASREG.h | 1 -
include/configs/TK885D.h | 2 --
include/configs/TQM823L.h | 2 --
include/configs/TQM823M.h | 2 --
include/configs/TQM8260.h | 2 --
include/configs/TQM8272.h | 2 --
include/configs/TQM850L.h | 2 --
include/configs/TQM850M.h | 2 --
include/configs/TQM855L.h | 2 --
include/configs/TQM855M.h | 2 --
include/configs/TQM860L.h | 2 --
include/configs/TQM860M.h | 2 --
include/configs/TQM862L.h | 2 --
include/configs/TQM862M.h | 2 --
include/configs/TQM866M.h | 2 --
include/configs/TQM885D.h | 2 --
include/configs/VCMA9.h | 3 ---
include/configs/VoVPN-GW.h | 3 ---
include/configs/a320evb.h | 3 ---
include/configs/adp-ag101.h | 3 ---
include/configs/adp-ag101p.h | 3 ---
include/configs/adp-ag102.h | 3 ---
include/configs/afeb9260.h | 1 -
include/configs/apollon.h | 1 -
include/configs/astro_mcf5373l.h | 1 -
include/configs/at91rm9200ek.h | 1 -
include/configs/at91sam9260ek.h | 1 -
include/configs/at91sam9261ek.h | 1 -
include/configs/at91sam9263ek.h | 1 -
include/configs/at91sam9m10g45ek.h | 1 -
include/configs/at91sam9rlek.h | 1 -
include/configs/atc.h | 2 --
include/configs/balloon3.h | 1 -
include/configs/c2mon.h | 2 --
include/configs/ca9x4_ct_vxp.h | 1 -
include/configs/calimain.h | 1 -
include/configs/cam_enc_4xx.h | 1 -
include/configs/cm4008.h | 2 --
include/configs/cm41xx.h | 2 --
include/configs/cobra5272.h | 1 -
include/configs/colibri_pxa270.h | 1 -
include/configs/cpu9260.h | 1 -
include/configs/cpuat91.h | 1 -
include/configs/da830evm.h | 1 -
include/configs/da850evm.h | 1 -
include/configs/davinci_dm355evm.h | 1 -
include/configs/davinci_dm355leopard.h | 1 -
include/configs/davinci_dm365evm.h | 1 -
include/configs/davinci_dm6467evm.h | 1 -
include/configs/davinci_dvevm.h | 1 -
include/configs/davinci_schmoogie.h | 1 -
include/configs/davinci_sffsdr.h | 1 -
include/configs/davinci_sonata.h | 1 -
include/configs/dbau1x00.h | 1 -
include/configs/debris.h | 1 -
include/configs/eXalion.h | 3 ---
include/configs/ea20.h | 1 -
include/configs/eb_cpux9k2.h | 2 --
include/configs/efikamx.h | 1 -
include/configs/enbw_cmc.h | 1 -
include/configs/ep8260.h | 3 ---
include/configs/ethernut5.h | 1 -
include/configs/flea3.h | 1 -
include/configs/grasshopper.h | 1 -
include/configs/gw8260.h | 3 ---
include/configs/hawkboard.h | 1 -
include/configs/hermes.h | 2 --
include/configs/highbank.h | 1 -
include/configs/idmr.h | 1 -
include/configs/ima3-mx53.h | 1 -
include/configs/imx27lite-common.h | 1 -
include/configs/imx31_litekit.h | 1 -
include/configs/imx31_phycore.h | 1 -
include/configs/incaip.h | 3 ---
include/configs/integratorap.h | 1 -
include/configs/integratorcp.h | 1 -
include/configs/jadecpu.h | 1 -
include/configs/kvme080.h | 2 --
include/configs/linkstation.h | 1 -
include/configs/lubbock.h | 3 ---
include/configs/lwmon.h | 2 --
include/configs/m28evk.h | 1 -
include/configs/meesc.h | 1 -
include/configs/mpc7448hpc2.h | 1 -
include/configs/ms7750se.h | 2 --
include/configs/mx1ads.h | 3 ---
include/configs/mx25pdk.h | 1 -
include/configs/mx28evk.h | 1 -
include/configs/mx31ads.h | 1 -
include/configs/mx31pdk.h | 1 -
include/configs/mx35pdk.h | 1 -
include/configs/mx51evk.h | 1 -
include/configs/mx53ard.h | 1 -
include/configs/mx53evk.h | 1 -
include/configs/mx53loco.h | 1 -
include/configs/mx53smd.h | 1 -
include/configs/mx6qarm2.h | 1 -
include/configs/mx6qsabrelite.h | 1 -
include/configs/nhk8815.h | 1 -
include/configs/ns9750dev.h | 3 ---
include/configs/omap1510inn.h | 2 --
include/configs/omap2420h4.h | 2 --
include/configs/omap5912osk.h | 2 --
include/configs/omap730p2.h | 2 --
include/configs/origen.h | 3 ---
include/configs/otc570.h | 1 -
include/configs/palmld.h | 1 -
include/configs/palmtc.h | 1 -
include/configs/pb1x00.h | 3 ---
include/configs/pdnb3.h | 2 --
include/configs/pm9261.h | 1 -
include/configs/pm9263.h | 1 -
include/configs/pm9g45.h | 1 -
include/configs/ppmc7xx.h | 2 --
include/configs/ppmc8260.h | 3 ---
include/configs/pxa255_idp.h | 3 ---
include/configs/qemu-mips.h | 3 ---
include/configs/qi_lb60.h | 1 -
include/configs/qong.h | 1 -
include/configs/quantum.h | 2 --
include/configs/r2dplus.h | 2 --
include/configs/r7780mp.h | 2 --
include/configs/rsdproto.h | 3 ---
include/configs/s5p_goni.h | 3 ---
include/configs/s5pc210_universal.h | 3 ---
include/configs/sacsng.h | 3 ---
include/configs/sbc35_a9g20.h | 1 -
include/configs/scb9328.h | 1 -
include/configs/smdk2410.h | 3 ---
include/configs/smdk5250.h | 3 ---
include/configs/smdk6400.h | 3 ---
include/configs/smdkc100.h | 3 ---
include/configs/smdkv310.h | 3 ---
include/configs/snapper9260.h | 1 -
include/configs/stxxtc.h | 2 --
include/configs/svm_sc8xx.h | 2 --
include/configs/tb0229.h | 2 --
include/configs/tnetv107x_evm.h | 1 -
include/configs/tny_a9260.h | 1 -
include/configs/top9000.h | 1 -
include/configs/trats.h | 3 ---
include/configs/trizepsiv.h | 3 ---
include/configs/tt01.h | 1 -
include/configs/tx25.h | 1 -
include/configs/u8500_href.h | 1 -
include/configs/uc100.h | 2 --
include/configs/utx8245.h | 1 -
include/configs/v37.h | 2 --
include/configs/vct.h | 1 -
include/configs/versatile.h | 1 -
include/configs/virtlab2.h | 2 --
include/configs/vision2.h | 1 -
include/configs/vpac270.h | 1 -
include/configs/xaeniax.h | 3 ---
include/configs/zipitz2.h | 1 -
include/configs/zmx25.h | 1 -
mkconfig | 1 +
242 files changed, 17 insertions(+), 405 deletions(-)
create mode 100644 include/config_fallbacks.h
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index 25cd833..d870d12 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -162,9 +162,6 @@
# undef CONFIG_SYS_HZ
#endif
#define CONFIG_SYS_HZ 1000
-#ifndef CONFIG_SYS_BAUDRATE_TABLE
-# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#endif
/* Blackfin POST tests */
#ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
diff --git a/board/fads/fads.h b/board/fads/fads.h
index 3dc5358..1a3d22a 100644
--- a/board/fads/fads.h
+++ b/board/fads/fads.h
@@ -147,8 +147,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
new file mode 100644
index 0000000..430890c
--- /dev/null
+++ b/include/config_fallbacks.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2012 Texas Instruments
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __CONFIG_FALLBACKS_H
+#define __CONFIG_FALLBACKS_H
+
+#ifndef CONFIG_SYS_BAUDRATE_TABLE
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#endif
+
+#endif /* __CONFIG_FALLBACKS_H */
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index 0c21bd8..b85244a 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -49,7 +49,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 5
diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h
index e7c6f96..e7a6c80 100644
--- a/include/configs/AMX860.h
+++ b/include/configs/AMX860.h
@@ -121,8 +121,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 48e6df5..ecf5fb8 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -101,8 +101,6 @@
#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
*/
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index e1951eb..633e9bd 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -51,7 +51,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index ed3f9e1..b2b9e07 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -49,7 +49,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index abf4ef4..7ac182f 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -203,8 +203,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */
/*
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 723bdf3..aa5ce29 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -216,8 +216,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */
#define CONFIG_LOOPW
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index 77414ab..c8821fd 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -49,7 +49,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 346b49c..eb9fe46 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -40,7 +40,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index c6a17b0..da40c18 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -145,7 +145,6 @@
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment is in FLASH */
#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_ETHADDR 00:01:77:00:60:40
#define CONFIG_IPADDR 192.168.0.30
diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h
index a0acfd2..1638d35 100644
--- a/include/configs/EP88x.h
+++ b/include/configs/EP88x.h
@@ -96,8 +96,6 @@
#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
*/
diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h
index 841bf11..9bac44e 100644
--- a/include/configs/ESTEEM192E.h
+++ b/include/configs/ESTEEM192E.h
@@ -102,10 +102,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h
index c427093..2703625 100644
--- a/include/configs/ETX094.h
+++ b/include/configs/ETX094.h
@@ -122,8 +122,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index 57336f9..35c0c7e 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -154,8 +154,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index 438d19e..559a83f 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -100,8 +100,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h
index 339bb59..fa6105d 100644
--- a/include/configs/FLAGADM.h
+++ b/include/configs/FLAGADM.h
@@ -112,8 +112,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index 38d905a..6d7ca27 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -151,8 +151,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index ca0b1cc..b074c7d 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -151,8 +151,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 68a0cfd..1ea4108 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -64,16 +64,6 @@
#define CONFIG_BAUDRATE 38400
/*
- * Set allowable console baud rates
- */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, \
- 19200, \
- 38400, \
- 57600, \
- 115200, \
- }
-
-/*
* Print console information
*/
#undef CONFIG_SYS_CONSOLE_INFO_QUIET
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index 8f4e544..a62ef63 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -190,7 +190,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM }
/*-----------------------------------------------------------------------
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 27bd146..94b05dc 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -166,8 +166,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index b011d50..81f219c 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -170,8 +170,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index be778fe..6d0937f 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -215,8 +215,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/*
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index ba8d633..2379718 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -135,8 +135,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index d966306..6dd9812 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -175,8 +175,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0x04400000
#define CONFIG_MISC_INIT_R 1 /* We need misc_init_r() */
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 922b079..d6474bd 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -160,8 +160,6 @@
#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0x09900000
#define CONFIG_MISC_INIT_R /* We need misc_init_r() */
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index b827954..f98a66b 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -129,8 +129,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 9b0c32a..d6e9b23 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -126,8 +126,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 0f4ea41..c3855c3 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -139,8 +139,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 6f462be..a1eaeff 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -36,7 +36,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index bfbb06c..d417e24 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -41,7 +41,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 7bb6dfe..733aece 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -40,7 +40,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index 104fcde..9524e10 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -42,7 +42,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index b843e07..30584fe 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -33,7 +33,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG /* disable watchdog */
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index dd8a560..2feb783 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -33,7 +33,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG /* disable watchdog */
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 1d3b5c3..ac200f5 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -43,7 +43,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG /* disable watchdog */
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index de15163..1a03f5d 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -41,7 +41,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index e34dc40..9c2a3bb 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -46,7 +46,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 928b044..706e3d6 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -41,7 +41,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 216244c..896d0d8 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -40,7 +40,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 29b9b2a..64f8302 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -40,7 +40,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index d0044b1..0d09f0e 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -40,7 +40,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index e2e2445..64928e9 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -41,7 +41,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index d934d8e..b623c33 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -41,7 +41,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index f31972c..3bdb867 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -41,7 +41,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#define CONFIG_HW_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 813f0cb..3487e49 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -41,7 +41,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#define CONFIG_HW_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
diff --git a/include/configs/MBX.h b/include/configs/MBX.h
index 79780bd..95ddc97 100644
--- a/include/configs/MBX.h
+++ b/include/configs/MBX.h
@@ -119,8 +119,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h
index 969ba7e..8d1ca48 100644
--- a/include/configs/MBX860T.h
+++ b/include/configs/MBX860T.h
@@ -74,8 +74,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index b9c1638..3ff36ad 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -162,8 +162,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
index f7fba0c..1391ce5 100644
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -140,8 +140,6 @@
1MB - 64K FLASH0 SEG =960K
(size=0xf0000)*/
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* NS16550 Configuration
*/
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
index f304272..84a167d 100644
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -49,7 +49,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 5
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 0724752..52d1729 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -66,7 +66,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOT_RETRY_TIME -1
diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h
index 46151da..8350830 100644
--- a/include/configs/MVS1.h
+++ b/include/configs/MVS1.h
@@ -124,8 +124,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index e36476e..31fe893 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -155,8 +155,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index acf5dcb..fd3ab16 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -168,8 +168,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index c58899b..5ca01a0 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -156,8 +156,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index 3494b7a..61b19ab 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -137,8 +137,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 7e3ba2a..5015b79 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -159,8 +159,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index bb0d3a3..8b13eb0 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -101,8 +101,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index 77cedc0..7e1c11e 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -50,7 +50,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_PREBOOT ""
#define CONFIG_BOOTDELAY 5
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index a8d20ca..c3f295b 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -50,7 +50,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_PREBOOT ""
#define CONFIG_BOOTDELAY 5
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index cde0fd6..fbcf8e5 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -200,8 +200,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/*
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 74ced5a..c37aafd 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -200,8 +200,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/*
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 60aabf3..992443a 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -117,10 +117,6 @@
#undef CONFIG_SYS_EXT_SERIAL_CLOCK
#define CONFIG_SYS_BASE_BAUD 691200
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index dae4577..93876b1 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -171,7 +171,6 @@
/*
* Serial port configuration
*/
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index 36efbf2..fa77ffd 100644
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -255,8 +255,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
index 5c6ed07..efa7bd6 100644
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -255,8 +255,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index b0bee82..3156320 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -165,8 +165,6 @@ CONFIG_SPI
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index a8e9a4a..9befacb 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -162,8 +162,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* JFFS2 partitions
*/
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 40980fe..b042c67 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -151,8 +151,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 267ece1..b215c2d 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -134,8 +134,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index 74926d8..8ffb014 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -103,8 +103,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index efc59fe..f8bcf0f 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -178,7 +178,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Low Level Configuration Settings
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index c1865fc..d4d3d57 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -216,9 +216,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 0f8084e..671d521 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -180,8 +180,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index 73216dc..87d52ba 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -234,8 +234,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */
#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
diff --git a/include/configs/SM850.h b/include/configs/SM850.h
index 833b18a..e42e2cd 100644
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -109,8 +109,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index fba5b5e..cffeb11 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -121,8 +121,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index 01c2b3d..ea09368 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -90,8 +90,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* BOOTP options
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 774c98f..b7fbe5e 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -188,8 +188,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index 35171b6..f54fcb3 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -226,7 +226,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
/*-----------------------------------------------------------------------
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index 9ba307e..84e4891 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -194,7 +194,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
/*-----------------------------------------------------------------------
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index c93b12e..d95a226 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -48,7 +48,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 19200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 72c6523..0c52775 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -200,8 +200,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Enable loopw command.
*/
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index f2a2e33..b26e4f4 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -166,8 +166,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index f6b856c..a9bf525 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -161,8 +161,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 626cf19..58c9716 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -268,8 +268,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */
/*
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 413ce64..c2618dc 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -332,8 +332,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0x40000104 /* "bad" address */
/*
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 6114bb0..d217d3b 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -151,8 +151,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index 911560c..52e1125 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -152,8 +152,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index fd90501..e36a2bb 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -155,8 +155,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 3e3f6de..473301a 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -189,8 +189,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index cdf4885..ed61f0f 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -154,8 +154,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 7ccc614..4d7effb 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -155,8 +155,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 79bea34..db7c1c3 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -158,8 +158,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 7693459..af528fd 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -158,8 +158,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 8636ff4..b1cb406 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -201,8 +201,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 5204771..c960a54 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -198,8 +198,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Enable loopw command.
*/
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 76cd394..082f3f9 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -181,9 +181,6 @@
/* we configure PWM Timer 4 to 1ms 1000Hz */
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* support additional compression methods */
#define CONFIG_BZIP2
#define CONFIG_LZO
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index c06909f..0b6453b 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -86,9 +86,6 @@
/* don't allow baudrate change */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
-/* supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* select ethernet configuration
*
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
index 1fafbed..a2b347a 100644
--- a/include/configs/a320evb.h
+++ b/include/configs/a320evb.h
@@ -71,9 +71,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK 18432000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Ethernet
*/
diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h
index 8421c79..6bf0add 100644
--- a/include/configs/adp-ag101.h
+++ b/include/configs/adp-ag101.h
@@ -100,9 +100,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK ((46080000 * 20) / 25) /* AG101 */
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Ethernet
*/
diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index ffc70a6..747d061 100644
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -100,9 +100,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Ethernet
*/
diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h
index a4628e4..35f88cc 100644
--- a/include/configs/adp-ag102.h
+++ b/include/configs/adp-ag102.h
@@ -99,9 +99,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Ethernet
*/
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 2adf8f9..6715cb4 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -157,7 +157,6 @@
"rw rootfstype=jffs2 panic=20"
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index 8f06cd7..aebca71 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -112,7 +112,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <config_cmd_default.h>
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index d468e49..f89a567 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -147,7 +147,6 @@
*/
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (2)
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 7e6c155..9f908ce 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -129,7 +129,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID 0/* ignored in arm */
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_BAUDRATE 115200
/*
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index db52ee6..07b1968 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -73,7 +73,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
/* LED */
#define CONFIG_AT91_LED
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 5140b26..6fd0b83 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -67,7 +67,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200, 57600, 38400, 19200, 9600}
/* LCD */
#define CONFIG_LCD
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index f424e5a..40308ca 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -71,7 +71,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
/* LCD */
#define CONFIG_LCD 1
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 159857d..f46b91b 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -178,7 +178,6 @@
"rw rootfstype=jffs2"
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 79ea1f2..45f8baf 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -62,7 +62,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
/* LCD */
#define CONFIG_LCD 1
diff --git a/include/configs/atc.h b/include/configs/atc.h
index bf1f202..75f950b 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -171,8 +171,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */
#define CONFIG_SYS_ALLOC_DPRAM
diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
index a5ec224..1417240 100644
--- a/include/configs/balloon3.h
+++ b/include/configs/balloon3.h
@@ -54,7 +54,6 @@
#define CONFIG_PXA_SERIAL
#define CONFIG_STUART 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h
index f325d2b..01e5e90 100644
--- a/include/configs/c2mon.h
+++ b/include/configs/c2mon.h
@@ -127,8 +127,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
index c5226ab..14b8146 100644
--- a/include/configs/ca9x4_ct_vxp.h
+++ b/include/configs/ca9x4_ct_vxp.h
@@ -62,7 +62,6 @@
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 0x10009000
#define CONFIG_SYS_SERIAL1 0x1000A000
diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index 6b68f10..81c9b9b 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -173,7 +173,6 @@
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_FLASH_CFI_DRIVER
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 71faf1c..2512a75 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -54,7 +54,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 0x01c20000
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index 81e4de4..408e918 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -56,8 +56,6 @@
#define CONFIG_SERIAL1
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* BOOTP options
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index 785ab0a..d85a600 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -56,8 +56,6 @@
#define CONFIG_SERIAL1
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* BOOTP options
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 6d97a0c..c9fdc2c 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -81,7 +81,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 19200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
/* ---
* set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 7691fb3..4a3b01d 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -56,7 +56,6 @@
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 8b6a687..a877066 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -487,7 +487,6 @@
#endif
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#if defined(CONFIG_CPU9G20)
#define CONFIG_SYS_PROMPT "CPU9G20=> "
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 1b43c54..dc676df 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -197,7 +197,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x21000000
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_PROMPT "CPUAT91=> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 781878e..aa7a6ba 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -65,7 +65,6 @@
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* I2C Configuration
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 989472b..0adbb1f 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -143,7 +143,6 @@
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SPI
#define CONFIG_SPI_FLASH
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index 42caf1e..bd17419 100644
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -45,7 +45,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 0x01c20000
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
index b05cfba..b232c50 100644
--- a/include/configs/davinci_dm355leopard.h
+++ b/include/configs/davinci_dm355leopard.h
@@ -44,7 +44,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 0x01c20000
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index a75bce6..92d7227 100644
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -45,7 +45,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 0x01c20000
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 4f14e04..57a6148 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -73,7 +73,6 @@ extern unsigned int davinci_arm_clk_get(void);
#define CONFIG_SYS_NS16550_CLK 24000000
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* I2C Configuration */
#define CONFIG_HARD_I2C
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 310d577..f0cc780 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -89,7 +89,6 @@
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*===================*/
/* I2C Configuration */
/*===================*/
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 949174a..c07002a 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -58,7 +58,6 @@
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*===================*/
/* I2C Configuration */
/*===================*/
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index c931ede..a62d7aa 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -56,7 +56,6 @@
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* I2C Configuration */
#define CONFIG_HARD_I2C
#define CONFIG_DRIVER_DAVINCI_I2C
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 854099b..fb26643 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -90,7 +90,6 @@
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*===================*/
/* I2C Configuration */
/*===================*/
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 1d5cf2c..13ddc5c 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -59,7 +59,6 @@
#define CONFIG_BAUDRATE 115200
/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#undef CONFIG_BOOTARGS
diff --git a/include/configs/debris.h b/include/configs/debris.h
index 303630d..32aa4e5 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -294,7 +294,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM }
/*-----------------------------------------------------------------------
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index afb1de6..3238ac7 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -93,9 +93,6 @@
#define CONFIG_SYS_MAXARGS 8 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_MISC_INIT_R 1
/*-----------------------------------------------------------------------
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index 88b085d..4a03546 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -77,7 +77,6 @@
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SPI
#define CONFIG_SPI_FLASH
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 21c471a..4d8be2b 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -188,8 +188,6 @@
* UART/CONSOLE
*/
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
-
#define CONFIG_BAUDRATE 115200
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index 120055f..eb7d72b 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -94,7 +94,6 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
#define CONFIG_MXC_GPIO
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 29b0d33..7dc6cca 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -83,7 +83,6 @@
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* I2C Configuration
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 221d3e0..7adedc9 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -376,9 +376,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 604d2dd..5aed0ed 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -103,7 +103,6 @@
#define CONFIG_ATMEL_USART
#define CONFIG_USART3 /* USART 3 is DBGU */
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index dd7c73f..44c5532 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -82,7 +82,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/*
* Command definition
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index e27216a..cc84c9c 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -191,7 +191,6 @@
#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000)
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#endif /* __GRASSHOPPER_CONFIG_H */
/* vim: set ts=8 noet: */
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 2a40de1..7935aea 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -387,9 +387,6 @@
#define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
- CONFIG_SYS_MEM_END_USAGE )
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index 6d2d4fb..0e9188d 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -98,7 +98,6 @@
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Network & Ethernet Configuration
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index d849b5c..0f29cd1 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -105,8 +105,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */
/*
* Low Level Configuration Settings
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 520fa4c..791f3f5 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -39,7 +39,6 @@
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index 50dd918..86bfa01 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -47,7 +47,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 19200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#define CONFIG_ETHADDR 00:06:3b:01:41:55
#define CONFIG_ETHPRIME
#define CONFIG_IPADDR 192.168.30.1
diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h
index ea48d64..186d8b9 100644
--- a/include/configs/ima3-mx53.h
+++ b/include/configs/ima3-mx53.h
@@ -92,7 +92,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Command definition */
#include <config_cmd_default.h>
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index c1f1aa6..7d2876b 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -105,7 +105,6 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Flash & Environment
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index bbcbce1..a340e97 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -87,7 +87,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 3153eb5..1728358 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -65,7 +65,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 70c9bb4..f632a2c 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -47,9 +47,6 @@
#define CONFIG_BAUDRATE 115200
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_PREBOOT "echo;" \
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 0a704cb..fea40fc 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -65,7 +65,6 @@
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
#define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 0x16000000
#define CONFIG_SYS_SERIAL1 0x17000000
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 57610a6..ca2d92d 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -74,7 +74,6 @@
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 0x16000000
#define CONFIG_SYS_SERIAL1 0x17000000
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
index d644fea..296bbe1 100644
--- a/include/configs/jadecpu.h
+++ b/include/configs/jadecpu.h
@@ -182,7 +182,6 @@
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "jade> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index 203a4b2..e49dc28 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -114,8 +114,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x00100000
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index cdf6827..bb96034 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -282,7 +282,6 @@
*/
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 57600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 361ffc5..7c8eb64 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -130,9 +130,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#ifdef CONFIG_MMC
#define CONFIG_PXA_MMC
#define CONFIG_CMD_MMC
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index e23b0a1..405bc69 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -243,8 +243,6 @@
*/
#ifdef CONFIG_WATCHDOG
#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 57600, 115200 }
-#else
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
/*----------------------------------------------------------------------*/
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index c62f4d0..b8389e8 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -136,7 +136,6 @@
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* MMC Driver
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index db1e87d..1e897e2 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -89,7 +89,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 3e73775..c0c95ed 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -107,7 +107,6 @@
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
#define CONFIG_ZERO_BOOTDELAY_CHECK
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index 52e15cc..aca367f 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -60,8 +60,6 @@
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE 512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 9c1b255..81476ec 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -133,9 +133,6 @@
#define CONFIG_SYS_HZ 3686400
#define CONFIG_SYS_CPUSPEED 0x141
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* Stack sizes
*
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 7210b6e..efca287 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -57,7 +57,6 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* No NOR flash present */
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 0c18e50..48e6b83 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -125,7 +125,6 @@
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* DMA
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 87638a4..cc720e8 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -84,7 +84,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 6ce97bc..7634de7 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -85,7 +85,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index bd57baa..a98230a 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -89,7 +89,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/*
* Command definition
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 58b6f1c..ba1a129 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -138,7 +138,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index f48a41e..333ba61 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -80,7 +80,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Command definition */
#include <config_cmd_default.h>
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index a77e5b2..453cef9 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -94,7 +94,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Command definition */
#include <config_cmd_default.h>
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 99daafb..c80e5e8 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -106,7 +106,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Command definition */
#include <config_cmd_default.h>
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index a04db3f..7cd7173 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -83,7 +83,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Command definition */
#include <config_cmd_default.h>
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 90652c6..9fca0e1 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -70,7 +70,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Command definition */
#include <config_cmd_default.h>
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index feabc05..7469038 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -115,7 +115,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Command definition */
#include <config_cmd_default.h>
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 20db397..de20771 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -106,7 +106,6 @@
#define CONFIG_PL011_SERIAL
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_SERIAL0 0x101FD000
#define CFG_SERIAL1 0x101FB000
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
index c495423..f465a56 100644
--- a/include/configs/ns9750dev.h
+++ b/include/configs/ns9750dev.h
@@ -122,9 +122,6 @@
#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64)
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define NS9750_ETH_PHY_ADDRESS (0x0000)
/*-----------------------------------------------------------------------
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 43de18b..f591a86 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -83,8 +83,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Command line configuration.
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 46d1643..13762cc 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -118,8 +118,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-
/*
* Command line configuration.
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index d3a2438..639d4a3 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -81,8 +81,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Command line configuration.
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index f7900e0..f1cadb2 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -85,8 +85,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Command line configuration.
diff --git a/include/configs/origen.h b/include/configs/origen.h
index d4d0f84..6dcd25d 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -117,9 +117,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* Stack sizes */
#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 8599378..7abc42a 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -88,7 +88,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index 88f4bfb..c4ea5ff 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -55,7 +55,6 @@
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index d1fef25..9fa6733 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -59,7 +59,6 @@
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index d056884..810233f 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -54,9 +54,6 @@
#define CONFIG_BAUDRATE 115200
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#undef CONFIG_BOOTARGS
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 43ec38f..19b80d1 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -117,8 +117,6 @@
#define CONFIG_IXP425_TIMER_CLK 66666666
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Stack sizes
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index eba5616..cdb3593 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -361,7 +361,6 @@
#endif
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "pm9261> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index bf31c13..d202d0a 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -394,7 +394,6 @@
#endif
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "u-boot-pm9263> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 4779878..a044346 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -167,7 +167,6 @@
"rootfstype=jffs2"
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 4ceee17..5cd6609 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -368,7 +368,6 @@
/*
* Serial port config
*
- * CONFIG_SYS_BAUDRATE_TABLE - List of valid baud rates
* CONFIG_SYS_NS16550 - Include the NS16550 driver
* CONFIG_SYS_NS16550_SERIAL - Include the serial (wrapper) driver
* CONFIG_SYS_NS16550_CLK - Frequency of reference clock
@@ -376,7 +375,6 @@
* CONFIG_SYS_NS16550_COM1 - Base address of 1st serial port
*/
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK 3686400
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 327863e..f4c9143 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -346,9 +346,6 @@
#define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
- CONFIG_SYS_MEM_END_USAGE )
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 0666f7b..387661b 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -246,9 +246,6 @@
#define RTC 1 /* enable 32KHz osc */
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#ifdef CONFIG_MMC
#define CONFIG_PXA_MMC
#define CONFIG_CMD_MMC
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index f5a137e..da32b30 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -40,9 +40,6 @@
#define CONFIG_BAUDRATE 115200
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#undef CONFIG_BOOTARGS
diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
index ebd8223..a3fc465 100644
--- a/include/configs/qi_lb60.h
+++ b/include/configs/qi_lb60.h
@@ -22,7 +22,6 @@
#define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */
#define CONFIG_BAUDRATE 57600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 3e36bb0..3b63ac2 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -122,7 +122,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index dcfa29a..4f24651 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -142,8 +142,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 9cdfc14..65dcffb 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -46,8 +46,6 @@
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE 512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index b0655c3..a7b3628 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -70,8 +70,6 @@
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE 512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 3a70041..df7f40c 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -161,9 +161,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index e133a17..f3d3e4d 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -190,9 +190,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* Stack sizes */
#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 00db374..9337d5b 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -215,9 +215,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* Stack sizes */
#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 43036b2..f3b0fc1 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -620,9 +620,6 @@
#define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
- CONFIG_SYS_MEM_END_USAGE )
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index cdf8659..316e3fb 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -61,7 +61,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 180c5da..1494a2e 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -87,7 +87,6 @@
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BAUDRATE 115200
/*
* Definitions related to passing arguments to kernel.
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 7d16320..bfbb2c3 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -144,9 +144,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* support additional compression methods */
#define CONFIG_BZIP2
#define CONFIG_LZO
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 0f63040..23df401 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -126,9 +126,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_RD_LVL
/* Stack sizes */
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index a2b9441..47a3d41 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -144,9 +144,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* Stack sizes
*
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 6663629..5ab8665 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -183,9 +183,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*-----------------------------------------------------------------------
* Stack sizes
*
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 702134b..868e6ae 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -116,9 +116,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* Stack sizes */
#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index cee65d1..bb2a463 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -104,7 +104,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "Snapper> "
/* I2C - Bit-bashed */
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index e7f5a0d..cbaa643 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -151,8 +151,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 2248680..0d939ee 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -177,8 +177,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
index fc2b57d..4ef835e 100644
--- a/include/configs/tb0229.h
+++ b/include/configs/tb0229.h
@@ -38,8 +38,6 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_PREBOOT "echo;" \
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index 7c3f334..2dd1a33 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -71,7 +71,6 @@
#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1)
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* Flash and environment info */
#define CONFIG_SYS_NO_FLASH
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 0043926..def5306 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -75,7 +75,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
index 2c66f33..1a5f680 100644
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@@ -90,7 +90,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
/* SD/MMC card */
#define CONFIG_MMC
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 5e38de2..2d0a1b1 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -166,9 +166,6 @@
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* Stack sizes */
#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index af464e1..c020ff4 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -172,9 +172,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#ifdef CONFIG_MMC
#define CONFIG_PXA_MMC
#define CONFIG_CMD_MMC
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index 2623dbc..9c1d525 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -171,7 +171,6 @@
/* console is UART2 on TT-01 */
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* ethernet setup for the onboard smc9118 */
#define CONFIG_MII
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 3dfafa5..6821528 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -93,7 +93,6 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_MXC_GPIO
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 95028de..2cfbec8 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -70,7 +70,6 @@
(void *)CFG_SERIAL2 }
#define CONFIG_CONS_INDEX 2
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Devices and file systems
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 9da318d..62ef2c5 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -182,8 +182,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
/*
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 1e59ef3..d203bb4 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -58,7 +58,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 57600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 2
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
diff --git a/include/configs/v37.h b/include/configs/v37.h
index a3fdc38..e36d249 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -142,8 +142,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 9ddc7b1..0a5ce64 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -74,7 +74,6 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_CLK 921600
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* SDRAM
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index bb835e0..ff23a92 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -93,7 +93,6 @@
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 0x101F1000
#define CONFIG_SYS_SERIAL1 0x101F2000
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 466d930..bf882b0 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -160,8 +160,6 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index f6904f3..76ab1bd 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -136,7 +136,6 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index 7802f44..ed18dbe 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -76,7 +76,6 @@
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 941f80c..a0cc247 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -67,9 +67,6 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-
-
/*
* BOOTP options
*/
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index afe1e89..cacf7ea 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -67,7 +67,6 @@
#define CONFIG_PXA_SERIAL
#define CONFIG_STUART 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Bootloader Components Configuration
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index d7ce6c6..4573149 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -69,7 +69,6 @@
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_CONS_INDEX 1 /* use UART2 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Ethernet
diff --git a/mkconfig b/mkconfig
index 438530b..daa1810 100755
--- a/mkconfig
+++ b/mkconfig
@@ -167,6 +167,7 @@ cat << EOF >> config.h
#include <config_defaults.h>
#include <configs/${CONFIG_NAME}.h>
#include <asm/config.h>
+#include <config_fallbacks.h>
EOF
exit 0
--
1.7.9.5
next prev parent reply other threads:[~2012-06-19 22:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-26 22:46 [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
2012-04-26 22:46 ` [U-Boot] [PATCH v2 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Tom Rini
2012-04-27 5:35 ` Mike Frysinger
2012-04-29 15:13 ` Stefano Babic
2012-04-26 23:53 ` [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
2012-04-27 5:34 ` Mike Frysinger
2012-04-27 14:31 ` Tom Rini
2012-04-27 6:31 ` Wolfgang Denk
2012-04-27 14:53 ` Tom Rini
2012-04-27 16:17 ` Wolfgang Denk
2012-04-27 16:47 ` Tom Rini
2012-04-27 17:19 ` Wolfgang Denk
2012-04-27 17:31 ` Tom Rini
2012-04-27 18:03 ` Tom Rini
2012-04-27 18:37 ` Mike Frysinger
2012-04-27 18:40 ` Wolfgang Denk
2012-04-27 19:02 ` Tom Rini
2012-06-19 20:50 ` Wolfgang Denk
2012-06-19 21:31 ` Tom Rini
2012-06-20 14:52 ` Tom Rini
2012-06-19 22:54 ` Tom Rini [this message]
2012-06-19 22:54 ` [U-Boot] [PATCH v4 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Tom Rini
2012-06-20 9:14 ` Stefano Babic
2012-06-20 18:36 ` Wolfgang Denk
2012-06-20 18:36 ` [U-Boot] [PATCH v4 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340146475-15969-1-git-send-email-trini@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.