From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Cyril Chemparathy <cyril@ti.com>, Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/2] regulator: tps6524x: Convert fixed ilimsel to table based
Date: Wed, 20 Jun 2012 22:32:08 +0800 [thread overview]
Message-ID: <1340202728.8003.3.camel@phoenix> (raw)
In-Reply-To: <1340202615.8003.1.camel@phoenix>
This patch refactors the code to get rid of the fixed_ilimsel and FIXED_ILIMSEL
flag usage, and convert all the fixed ilimsel to table based (with one entry in
the table).
We can differentiate fixed ilimsel by checking info->n_ilimsels == 1,
thus FIXED_ILIMSEL flag can be removed.
This change makes the logic of the code simpler as all the ilimsels are table
based now.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps6524x-regulator.c | 44 +++++++++++++++++++-------------
1 file changed, 26 insertions(+), 18 deletions(-)
diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index 48e37bd..947ece9 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -110,8 +110,6 @@
#define N_SWITCH 2
#define N_REGULATORS (N_DCDC + N_LDO + N_SWITCH)
-#define FIXED_ILIMSEL BIT(0)
-
#define CMD_READ(reg) ((reg) << 6)
#define CMD_WRITE(reg) (BIT(5) | (reg) << 6)
#define STAT_CLK BIT(3)
@@ -130,9 +128,7 @@ struct supply_info {
int n_voltages;
const unsigned int *voltages;
int n_ilimsels;
- const int *ilimsels;
- int fixed_ilimsel;
- int flags;
+ const unsigned int *ilimsels;
struct field enable, voltage, ilimsel;
};
@@ -353,24 +349,36 @@ static const unsigned int fixed_5000000_voltage[] = {
5000000
};
-static const int ldo_ilimsel[] = {
+static const unsigned int ldo_ilimsel[] = {
400000, 1500000
};
-static const int usb_ilimsel[] = {
+static const unsigned int usb_ilimsel[] = {
200000, 400000, 800000, 1000000
};
+static const unsigned int fixed_2400000_ilimsel[] = {
+ 2400000
+};
+
+static const unsigned int fixed_1200000_ilimsel[] = {
+ 1200000
+};
+
+static const unsigned int fixed_400000_ilimsel[] = {
+ 400000
+};
+
#define __MK_FIELD(_reg, _mask, _shift) \
{ .reg = (_reg), .mask = (_mask), .shift = (_shift), }
static const struct supply_info supply_info[N_REGULATORS] = {
{
.name = "DCDC1",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc1_voltages),
.voltages = dcdc1_voltages,
- .fixed_ilimsel = 2400000,
+ .n_ilimsels = ARRAY_SIZE(fixed_2400000_ilimsel),
+ .ilimsels = fixed_2400000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC1_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -378,10 +386,10 @@ static const struct supply_info supply_info[N_REGULATORS] = {
},
{
.name = "DCDC2",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc2_voltages),
.voltages = dcdc2_voltages,
- .fixed_ilimsel = 1200000,
+ .n_ilimsels = ARRAY_SIZE(fixed_1200000_ilimsel),
+ .ilimsels = fixed_1200000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC2_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -389,10 +397,10 @@ static const struct supply_info supply_info[N_REGULATORS] = {
},
{
.name = "DCDC3",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc3_voltages),
.voltages = dcdc3_voltages,
- .fixed_ilimsel = 1200000,
+ .n_ilimsels = ARRAY_SIZE(fixed_1200000_ilimsel),
+ .ilimsels = fixed_1200000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC3_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -439,8 +447,8 @@ static const struct supply_info supply_info[N_REGULATORS] = {
.name = "LCD",
.n_voltages = ARRAY_SIZE(fixed_5000000_voltage),
.voltages = fixed_5000000_voltage,
- .flags = FIXED_ILIMSEL,
- .fixed_ilimsel = 400000,
+ .n_ilimsels = ARRAY_SIZE(fixed_400000_ilimsel),
+ .ilimsels = fixed_400000_ilimsel,
.enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
BLOCK_LCD_SHIFT),
},
@@ -491,7 +499,7 @@ static int set_current_limit(struct regulator_dev *rdev, int min_uA,
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];
- if (info->flags & FIXED_ILIMSEL)
+ if (info->n_ilimsels == 1)
return -EINVAL;
for (i = 0; i < info->n_ilimsels; i++)
@@ -514,8 +522,8 @@ static int get_current_limit(struct regulator_dev *rdev)
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];
- if (info->flags & FIXED_ILIMSEL)
- return info->fixed_ilimsel;
+ if (info->n_ilimsels == 1)
+ return info->ilimsels[0];
ret = read_field(hw, &info->ilimsel);
if (ret < 0)
--
1.7.9.5
next prev parent reply other threads:[~2012-06-20 14:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-20 14:30 [PATCH 1/2] regulator: tps6524x: Convert to regulator_list_voltage_table() Axel Lin
2012-06-20 14:32 ` Axel Lin [this message]
2012-07-02 17:26 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340202728.8003.3.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=cyril@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.