From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH] regulator: tps65910: Convert to regulator_set_voltage_time_sel()
Date: Wed, 20 Jun 2012 22:40:10 +0800 [thread overview]
Message-ID: <1340203210.8003.6.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps65910-regulator.c | 34 ++++++--------------------------
1 file changed, 6 insertions(+), 28 deletions(-)
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index e1b01ec..373c529 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -824,31 +824,6 @@ static int tps65911_list_voltage(struct regulator_dev *dev, unsigned selector)
return (LDO_MIN_VOLT + selector * step_mv) * 1000;
}
-static int tps65910_set_voltage_dcdc_time_sel(struct regulator_dev *dev,
- unsigned int old_selector, unsigned int new_selector)
-{
- int id = rdev_get_id(dev);
- int old_volt, new_volt;
-
- old_volt = tps65910_list_voltage_dcdc(dev, old_selector);
- if (old_volt < 0)
- return old_volt;
-
- new_volt = tps65910_list_voltage_dcdc(dev, new_selector);
- if (new_volt < 0)
- return new_volt;
-
- /* VDD1 and VDD2 are 12.5mV/us, VDDCTRL is 100mV/20us */
- switch (id) {
- case TPS65910_REG_VDD1:
- case TPS65910_REG_VDD2:
- return DIV_ROUND_UP(abs(old_volt - new_volt), 12500);
- case TPS65911_REG_VDDCTRL:
- return DIV_ROUND_UP(abs(old_volt - new_volt), 5000);
- }
- return -EINVAL;
-}
-
/* Regulator ops (except VRTC) */
static struct regulator_ops tps65910_ops_dcdc = {
.is_enabled = regulator_is_enabled_regmap,
@@ -859,7 +834,7 @@ static struct regulator_ops tps65910_ops_dcdc = {
.get_mode = tps65910_get_mode,
.get_voltage_sel = tps65910_get_voltage_dcdc_sel,
.set_voltage_sel = tps65910_set_voltage_dcdc_sel,
- .set_voltage_time_sel = tps65910_set_voltage_dcdc_time_sel,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
.list_voltage = tps65910_list_voltage_dcdc,
};
@@ -1236,11 +1211,14 @@ static __devinit int tps65910_probe(struct platform_device *pdev)
pmic->desc[i].ops = &tps65910_ops_dcdc;
pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE *
VDD1_2_NUM_VOLT_COARSE;
+ pmic->desc[i].ramp_delay = 12500;
} else if (i == TPS65910_REG_VDD3) {
- if (tps65910_chip_id(tps65910) == TPS65910)
+ if (tps65910_chip_id(tps65910) == TPS65910) {
pmic->desc[i].ops = &tps65910_ops_vdd3;
- else
+ } else {
pmic->desc[i].ops = &tps65910_ops_dcdc;
+ pmic->desc[i].ramp_delay = 5000;
+ }
} else {
if (tps65910_chip_id(tps65910) == TPS65910)
pmic->desc[i].ops = &tps65910_ops;
--
1.7.9.5
next reply other threads:[~2012-06-20 14:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-20 14:40 Axel Lin [this message]
2012-06-20 14:44 ` [PATCH] regulator: tps65910: Convert to regulator_set_voltage_time_sel() Laxman Dewangan
2012-06-21 9:38 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340203210.8003.6.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.