From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH 1/2] regulator: tps65910: Remove unused min_uV and max_uV from struct tps_info
Date: Thu, 21 Jun 2012 18:45:46 +0800 [thread overview]
Message-ID: <1340275546.2922.1.camel@phoenix> (raw)
The min_uV and max_uV fields of struct tps_info are not used in the code.
For the case voltage_table is provided, the min_uV and max_uV are the same
values as volt_table[0] and volt_table[n_voltages -1].
For the case voltage_table is not available, having the min_uV and max_uV seems
misleading. Current code uses equations to get the voltage value in this case,
but these equations do not use the min_uV and max_uV fields of struct tps_info.
Thus this patch removes the min_uV and max_uV fields from struct tps_info.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps65910-regulator.c | 50 --------------------------------
1 file changed, 50 deletions(-)
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 373c529..edeaa2c 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -85,8 +85,6 @@ static const u16 VMMC_VSEL_table[] = {
struct tps_info {
const char *name;
- unsigned min_uV;
- unsigned max_uV;
u8 n_voltages;
const u16 *voltage_table;
int enable_time_us;
@@ -99,92 +97,68 @@ static struct tps_info tps65910_regs[] = {
},
{
.name = "vio",
- .min_uV = 1500000,
- .max_uV = 3300000,
.n_voltages = ARRAY_SIZE(VIO_VSEL_table),
.voltage_table = VIO_VSEL_table,
.enable_time_us = 350,
},
{
.name = "vdd1",
- .min_uV = 600000,
- .max_uV = 4500000,
.enable_time_us = 350,
},
{
.name = "vdd2",
- .min_uV = 600000,
- .max_uV = 4500000,
.enable_time_us = 350,
},
{
.name = "vdd3",
- .min_uV = 5000000,
- .max_uV = 5000000,
.n_voltages = ARRAY_SIZE(VDD3_VSEL_table),
.voltage_table = VDD3_VSEL_table,
.enable_time_us = 200,
},
{
.name = "vdig1",
- .min_uV = 1200000,
- .max_uV = 2700000,
.n_voltages = ARRAY_SIZE(VDIG1_VSEL_table),
.voltage_table = VDIG1_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vdig2",
- .min_uV = 1000000,
- .max_uV = 1800000,
.n_voltages = ARRAY_SIZE(VDIG2_VSEL_table),
.voltage_table = VDIG2_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vpll",
- .min_uV = 1000000,
- .max_uV = 2500000,
.n_voltages = ARRAY_SIZE(VPLL_VSEL_table),
.voltage_table = VPLL_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vdac",
- .min_uV = 1800000,
- .max_uV = 2850000,
.n_voltages = ARRAY_SIZE(VDAC_VSEL_table),
.voltage_table = VDAC_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux1",
- .min_uV = 1800000,
- .max_uV = 2850000,
.n_voltages = ARRAY_SIZE(VAUX1_VSEL_table),
.voltage_table = VAUX1_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux2",
- .min_uV = 1800000,
- .max_uV = 3300000,
.n_voltages = ARRAY_SIZE(VAUX2_VSEL_table),
.voltage_table = VAUX2_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vaux33",
- .min_uV = 1800000,
- .max_uV = 3300000,
.n_voltages = ARRAY_SIZE(VAUX33_VSEL_table),
.voltage_table = VAUX33_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vmmc",
- .min_uV = 1800000,
- .max_uV = 3300000,
.n_voltages = ARRAY_SIZE(VMMC_VSEL_table),
.voltage_table = VMMC_VSEL_table,
.enable_time_us = 100,
@@ -198,86 +172,62 @@ static struct tps_info tps65911_regs[] = {
},
{
.name = "vio",
- .min_uV = 1500000,
- .max_uV = 3300000,
.n_voltages = ARRAY_SIZE(VIO_VSEL_table),
.voltage_table = VIO_VSEL_table,
.enable_time_us = 350,
},
{
.name = "vdd1",
- .min_uV = 600000,
- .max_uV = 4500000,
.n_voltages = 73,
.enable_time_us = 350,
},
{
.name = "vdd2",
- .min_uV = 600000,
- .max_uV = 4500000,
.n_voltages = 73,
.enable_time_us = 350,
},
{
.name = "vddctrl",
- .min_uV = 600000,
- .max_uV = 1400000,
.n_voltages = 65,
.enable_time_us = 900,
},
{
.name = "ldo1",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 47,
.enable_time_us = 420,
},
{
.name = "ldo2",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 47,
.enable_time_us = 420,
},
{
.name = "ldo3",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo4",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 47,
.enable_time_us = 230,
},
{
.name = "ldo5",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo6",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo7",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 24,
.enable_time_us = 230,
},
{
.name = "ldo8",
- .min_uV = 1000000,
- .max_uV = 3300000,
.n_voltages = 24,
.enable_time_us = 230,
},
--
1.7.9.5
next reply other threads:[~2012-06-21 10:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-21 10:45 Axel Lin [this message]
2012-06-21 10:48 ` [PATCH 2/2] regulator: tps65910: Convert to regulator_list_voltage_table Axel Lin
2012-06-22 5:55 ` Laxman Dewangan
2012-06-22 5:57 ` [PATCH 1/2] regulator: tps65910: Remove unused min_uV and max_uV from struct tps_info Laxman Dewangan
2012-06-22 9:18 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340275546.2922.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.