Re: MPC5200b jffs2 memcpy alignment problem

["Albrecht Dreß" <albrecht.dress@arcor.de>]

[-- Attachment #1: Type: text/plain, Size: 2223 bytes --]

Hi Stephan:

Am 30.06.12 21:16 schrieb(en) Stephan Gatzka:
> I have a problem running jffs2 on an MPC5200b board. I run kernel 3.4, but older kernels like 3.1.5 are also affected. Every time I mount jffs2, previously written content gets garbled.
> 
> The problem was nailed down to memcpy(&fd->name, rd->name, checkedlen); in jffs2_scan_dirent_node in fs/jffs2/scan.c.
[snip]
> 2. use memcpy_fromio in the jffs2 code. memcpy_fromio behaves exactly in the way I described above. This could be also a good solution because flash access via LocalPlus bus is clearly IO.

I don't recall who proposed this patch, but exactly this solution is around for a longer time (mayby you search archives...).  On my board, I have a flash chip attached to the LocalBus in 16-bit mode.  Based on 3.2.16, the patch is:

---8<----------------------------------------------------------------------------
--- linux-3.2.16-orig/fs/jffs2/scan.c   2012-04-23 00:31:32.000000000 +0200
+++ linux-3.2.16/fs/jffs2/scan.c        2012-04-27 13:23:06.000000000 +0200
@@ -509,7 +509,11 @@
                                         sumptr = kmalloc(sumlen, GFP_KERNEL);
                                         if (!sumptr)
                                                 return -ENOMEM;
+#ifdef CONFIG_PPC_MPC52xx
+                                       memcpy_fromio(sumptr + sumlen - buf_len, buf + buf_size - buf_len, buf_len);
+#else
                                         memcpy(sumptr + sumlen - buf_len, buf + buf_size - buf_len, buf_len);
+#endif
                                 }
                                 if (buf_len < sumlen) {
                                         /* Need to read more so that the entire summary node is present */
@@ -1039,7 +1043,11 @@
         if (!fd) {
                 return -ENOMEM;
         }
+#ifdef CONFIG_PPC_MPC52xx
+       memcpy_fromio(&fd->name, rd->name, checkedlen);
+#else
         memcpy(&fd->name, rd->name, checkedlen);
+#endif
         fd->name[checkedlen] = 0;

         crc = crc32(0, fd->name, rd->nsize);
---8<----------------------------------------------------------------------------

Works perfectly with it...

Hope this helps,
Albrecht.

[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]