All of lore.kernel.org
 help / color / mirror / Atom feed
From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver
Date: Mon,  2 Jul 2012 13:33:21 +0200	[thread overview]
Message-ID: <1341228809-17824-2-git-send-email-thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <1341228809-17824-1-git-send-email-thomas.petazzoni@free-electrons.com>

From: Gregory Clement <gregory.clement@free-electrons.com>

Timer 0 is used as free-running clocksource, while timer 1 is used as
clock_event_device.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Lior Amsalem <alior@marvell.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: John Stultz <johnstul@us.ibm.com>
---
 drivers/clocksource/Kconfig              |    3 +
 drivers/clocksource/Makefile             |    3 +-
 drivers/clocksource/time-armada-370-xp.c |  242 ++++++++++++++++++++++++++++++
 include/linux/time-armada-370-xp.h       |   18 +++
 4 files changed, 265 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clocksource/time-armada-370-xp.c
 create mode 100644 include/linux/time-armada-370-xp.h

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 99c6b20..b323631 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -16,6 +16,9 @@ config CLKSRC_MMIO
 config DW_APB_TIMER
 	bool
 
+config ARMADA_370_XP_TIMER
+	bool
+
 config CLKSRC_DBX500_PRCMU
 	bool "Clocksource PRCMU Timer"
 	depends on UX500_SOC_DB8500
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index dd3e661..022015c 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_EM_TIMER_STI)	+= em_sti.o
 obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
 obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
-obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
\ No newline at end of file
+obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
+obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
new file mode 100644
index 0000000..c6bdba4
--- /dev/null
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -0,0 +1,242 @@
+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <asm/sched_clock.h>
+
+/*
+ * Timer block registers.
+ */
+#define TIMER_CTRL_OFF		0x0000
+#define  TIMER0_EN		 0x0001
+#define  TIMER0_RELOAD_EN	 0x0002
+#define  TIMER0_25MHZ            0x0800
+#define  TIMER0_DIV(div)         ((div) << 19)
+#define  TIMER1_EN		 0x0004
+#define  TIMER1_RELOAD_EN	 0x0008
+#define  TIMER1_25MHZ            0x1000
+#define  TIMER1_DIV(div)         ((div) << 22)
+#define TIMER_EVENTS_STATUS	0x0004
+#define  TIMER0_CLR_MASK         (~0x1)
+#define  TIMER1_CLR_MASK         (~0x100)
+#define TIMER0_RELOAD_OFF	0x0010
+#define TIMER0_VAL_OFF		0x0014
+#define TIMER1_RELOAD_OFF	0x0018
+#define TIMER1_VAL_OFF		0x001c
+
+/* Global timers are connected to the coherency fabric clock, and the
+   below divider reduces their incrementing frequency. */
+#define TIMER_DIVIDER_SHIFT     5
+#define TIMER_DIVIDER           (1 << TIMER_DIVIDER_SHIFT)
+
+/*
+ * SoC-specific data.
+ */
+static void __iomem *timer_base;
+static int timer_irq;
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
+
+static u32 notrace armada_370_xp_read_sched_clock(void)
+{
+	return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+/*
+ * Clockevent handling.
+ */
+static int
+armada_370_xp_clkevt_next_event(unsigned long delta,
+				struct clock_event_device *dev)
+{
+	unsigned long flags;
+	u32 u;
+
+	if (delta == 0)
+		return -ETIME;
+
+	local_irq_save(flags);
+
+	/*
+	 * Clear clockevent timer interrupt.
+	 */
+	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+	/*
+	 * Setup new clockevent timer value.
+	 */
+	writel(delta, timer_base + TIMER1_VAL_OFF);
+
+	/*
+	 * Enable the timer.
+	 */
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN |
+	     TIMER1_DIV(TIMER_DIVIDER_SHIFT));
+	writel(u, timer_base + TIMER_CTRL_OFF);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static void
+armada_370_xp_clkevt_mode(enum clock_event_mode mode,
+			  struct clock_event_device *dev)
+{
+	unsigned long flags;
+	u32 u;
+
+	local_irq_save(flags);
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		/*
+		 * Setup timer to fire at 1/HZ intervals.
+		 */
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+
+		/*
+		 * Enable timer.
+		 */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+
+		writel((u | TIMER1_EN | TIMER1_RELOAD_EN |
+			TIMER1_DIV(TIMER_DIVIDER_SHIFT)),
+		       timer_base + TIMER_CTRL_OFF);
+	} else {
+		/*
+		 * Disable timer.
+		 */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+
+		/*
+		 * ACK pending timer interrupt.
+		 */
+		writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+	}
+	local_irq_restore(flags);
+}
+
+static struct clock_event_device armada_370_xp_clkevt = {
+	.name		= "armada_370_xp_tick",
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 300,
+	.set_next_event	= armada_370_xp_clkevt_next_event,
+	.set_mode	= armada_370_xp_clkevt_mode,
+};
+
+static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
+{
+	/*
+	 * ACK timer interrupt and call event handler.
+	 */
+
+	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+	armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction armada_370_xp_timer_irq = {
+	.name		= "armada_370_xp_tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= armada_370_xp_timer_interrupt
+};
+
+void __init armada_370_xp_timer_init(void)
+{
+	u32 u;
+	struct device_node *np;
+	unsigned int timer_clk;
+	int ret;
+	np = of_find_compatible_node(NULL, NULL, "marvell,timer");
+	timer_base = of_iomap(np, 0);
+	WARN_ON(!timer_base);
+
+	if (of_find_property(np, "marvell,timer-25Mhz", NULL)) {
+		/* The fixed 25MHz timer is available so let's use it */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u | TIMER0_25MHZ | TIMER1_25MHZ,
+		       timer_base + TIMER_CTRL_OFF);
+		timer_clk = 25000000;
+	} else {
+		u32 clk = 0;
+		ret = of_property_read_u32(np, "clock-frequency", &clk);
+		WARN_ON(!clk || ret < 0);
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
+		       timer_base + TIMER_CTRL_OFF);
+		timer_clk = clk / TIMER_DIVIDER;
+	}
+
+	/* We use timer 0 as clocksource, and timer 1 for
+	   clockevents */
+	timer_irq = irq_of_parse_and_map(np, 1);
+
+	ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
+
+	/*
+	 * Set scale and timer for sched_clock.
+	 */
+	setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk);
+
+	/*
+	 * Setup free-running clocksource timer (interrupts
+	 * disabled).
+	 */
+	writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+	writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+
+	u = readl(timer_base + TIMER_CTRL_OFF);
+
+	writel((u | TIMER0_EN | TIMER0_RELOAD_EN |
+		TIMER0_DIV(TIMER_DIVIDER_SHIFT)), timer_base + TIMER_CTRL_OFF);
+
+	clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
+			      "armada_370_xp_clocksource",
+			      timer_clk, 300, 32, clocksource_mmio_readl_down);
+
+	/*
+	 * Setup clockevent timer (interrupt-driven).
+	 */
+	setup_irq(timer_irq, &armada_370_xp_timer_irq);
+	armada_370_xp_clkevt.mult = div_sc(timer_clk, NSEC_PER_SEC,
+					   armada_370_xp_clkevt.shift);
+	armada_370_xp_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe,
+							&armada_370_xp_clkevt);
+	armada_370_xp_clkevt.min_delta_ns =
+	    clockevent_delta2ns(1, &armada_370_xp_clkevt);
+	armada_370_xp_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&armada_370_xp_clkevt);
+}
+
diff --git a/include/linux/time-armada-370-xp.h b/include/linux/time-armada-370-xp.h
new file mode 100644
index 0000000..dfdfdc0
--- /dev/null
+++ b/include/linux/time-armada-370-xp.h
@@ -0,0 +1,18 @@
+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+#ifndef __TIME_ARMADA_370_XPPRCMU_H
+#define __TIME_ARMADA_370_XPPRCMU_H
+
+#include <linux/init.h>
+
+void __init armada_370_xp_timer_init(void);
+
+#endif
-- 
1.7.9.5

  reply	other threads:[~2012-07-02 11:33 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-02 11:33 [PATCH v6] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC Thomas Petazzoni
2012-07-02 11:33 ` Thomas Petazzoni [this message]
2012-07-02 12:29   ` [PATCH 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver Thomas Gleixner
2012-07-02 13:03     ` Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 2/9] arm: mach-mvebu: add header Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 3/9] arm: mach-mvebu: add source files Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 4/9] arm: mach-mvebu: add support for Armada 370 and Armada XP with DT Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 5/9] arm: mach-mvebu: add documentation for new device tree bindings Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 6/9] arm: mach-mvebu: add defconfig Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 7/9] arm: mach-mvebu: add compilation/configuration change Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 8/9] arm: mach-mvebu: add entry to MAINTAINERS Thomas Petazzoni
2012-07-02 11:33 ` [PATCH 9/9] ARM: mvebu: MPIC: read number of interrupts from control register Thomas Petazzoni
2012-07-02 15:30 ` [PATCH v6] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC Arnd Bergmann
2012-07-02 15:41   ` Thomas Petazzoni
2012-07-02 16:54     ` Arnd Bergmann
  -- strict thread matches above, loose matches on Subject: below --
2012-07-02 15:39 [PATCH v7] " Thomas Petazzoni
2012-07-02 15:39 ` [PATCH 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver Thomas Petazzoni
2012-07-02 17:40   ` Thomas Gleixner
2012-07-03 15:12   ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1341228809-17824-2-git-send-email-thomas.petazzoni@free-electrons.com \
    --to=thomas.petazzoni@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.