From: Axel Lin <axel.lin@gmail.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Mike Rapoport <mike@compulab.co.il>,
Danny Huang <dahuang@nvidia.com>, Liam Girdwood <lrg@ti.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RFT] regulator: tps6586x: Convert to regulator_[enable|disable|is_enabled|get_voltage_sel]_regmap
Date: Wed, 25 Jul 2012 08:51:44 +0800 [thread overview]
Message-ID: <1343177504.9132.3.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
This patch depends on Laxman's patches converting tps6586x mfd driver to use
regmap APIs. ( merged in mfd tree )
drivers/regulator/tps6586x-regulator.c | 76 +++++---------------------------
1 file changed, 11 insertions(+), 65 deletions(-)
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index e6da90a..2855d0c 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -57,9 +57,6 @@
struct tps6586x_regulator {
struct regulator_desc desc;
- int volt_reg;
- int volt_shift;
- int volt_nbits;
int enable_bit[2];
int enable_reg[2];
@@ -81,10 +78,10 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
int ret, val, rid = rdev_get_id(rdev);
uint8_t mask;
- val = selector << ri->volt_shift;
- mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+ val = selector << (ffs(rdev->desc->vsel_mask) - 1);
+ mask = rdev->desc->vsel_mask;
- ret = tps6586x_update(parent, ri->volt_reg, val, mask);
+ ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask);
if (ret)
return ret;
@@ -100,66 +97,14 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
-static int tps6586x_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
- uint8_t val, mask;
- int ret;
-
- ret = tps6586x_read(parent, ri->volt_reg, &val);
- if (ret)
- return ret;
-
- mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
- val = (val & mask) >> ri->volt_shift;
-
- if (val >= ri->desc.n_voltages)
- BUG();
-
- return val;
-}
-
-static int tps6586x_regulator_enable(struct regulator_dev *rdev)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
-
- return tps6586x_set_bits(parent, ri->enable_reg[0],
- 1 << ri->enable_bit[0]);
-}
-
-static int tps6586x_regulator_disable(struct regulator_dev *rdev)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
-
- return tps6586x_clr_bits(parent, ri->enable_reg[0],
- 1 << ri->enable_bit[0]);
-}
-
-static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
- uint8_t reg_val;
- int ret;
-
- ret = tps6586x_read(parent, ri->enable_reg[0], ®_val);
- if (ret)
- return ret;
-
- return !!(reg_val & (1 << ri->enable_bit[0]));
-}
-
static struct regulator_ops tps6586x_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
- .get_voltage_sel = tps6586x_get_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = tps6586x_set_voltage_sel,
- .is_enabled = tps6586x_regulator_is_enabled,
- .enable = tps6586x_regulator_enable,
- .disable = tps6586x_regulator_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
};
static const unsigned int tps6586x_ldo0_voltages[] = {
@@ -202,10 +147,11 @@ static const unsigned int tps6586x_dvm_voltages[] = {
.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \
.volt_table = tps6586x_##vdata##_voltages, \
.owner = THIS_MODULE, \
+ .enable_reg = TPS6586X_SUPPLY##ereg0, \
+ .enable_mask = 1 << (ebit0), \
+ .vsel_reg = TPS6586X_##vreg, \
+ .vsel_mask = ((1 << (nbits)) - 1) << (shift), \
}, \
- .volt_reg = TPS6586X_##vreg, \
- .volt_shift = (shift), \
- .volt_nbits = (nbits), \
.enable_reg[0] = TPS6586X_SUPPLY##ereg0, \
.enable_bit[0] = (ebit0), \
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
--
1.7.9.5
next reply other threads:[~2012-07-25 0:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-25 0:51 Axel Lin [this message]
2012-08-01 20:02 ` [PATCH RFT] regulator: tps6586x: Convert to regulator_[enable|disable|is_enabled|get_voltage_sel]_regmap Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343177504.9132.3.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dahuang@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=mike@compulab.co.il \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.