From: Gertjan van Wingerde <gwingerde@gmail.com>
To: <linux-wireless@vger.kernel.org>,
"John W. Linville" <linville@tuxdriver.com>
Cc: <users@rt2x00.serialmonkey.com>,
Ivo van Doorn <IvDoorn@gmail.com>,
Helmut Schaa <helmut.schaa@googlemail.com>,
Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH v2 6/6] rt2x00: rt2800 - Make probe_hw function common between PCI and USB.
Date: Fri, 31 Aug 2012 19:22:14 +0200 [thread overview]
Message-ID: <1346433734-3337-7-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1346433734-3337-6-git-send-email-gwingerde@gmail.com>
Refactor the probe_hw code so that more code can be shared between
rt2800pci and rt2800usb.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index c3cae1d..2ad3b7a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -44,6 +44,13 @@
#include "rt2800.h"
/*
+ * Allow hardware encryption to be disabled.
+ */
+static bool modparam_nohwcrypt = false;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
* Register access.
* All access to the CSR registers will go through the methods
* rt2800_register_read and rt2800_register_write.
@@ -4391,7 +4398,7 @@ void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
u16 word;
@@ -4399,6 +4406,11 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
u8 default_lna_gain;
/*
+ * Read the EEPROM.
+ */
+ rt2800_read_eeprom(rt2x00dev);
+
+ /*
* Start validation of the data that has been read.
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
@@ -4520,9 +4532,8 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u16 value;
@@ -4680,7 +4691,6 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
/*
* RF value list for rt28xx
@@ -4823,7 +4833,7 @@ static const struct rf_channel rf_vals_3x[] = {
{173, 0x61, 0, 9},
};
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
struct channel_info *info;
@@ -4999,7 +5009,72 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+ u32 reg;
+
+ /*
+ * Allocate eeprom data.
+ */
+ retval = rt2800_validate_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ retval = rt2800_init_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
+ rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
+
+ /*
+ * Initialize hw specifications.
+ */
+ retval = rt2800_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Set device capabilities.
+ */
+ __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
+ if (!rt2x00_is_usb(rt2x00dev))
+ __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
+
+ /*
+ * Set device requirements.
+ */
+ if (!rt2x00_is_soc(rt2x00dev))
+ __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
+ if (rt2x00_is_usb(rt2x00dev))
+ __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
+ else {
+ __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
+ }
+
+ /*
+ * Set the rssi offset.
+ */
+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_probe_hw);
/*
* IEEE80211 stack callback functions.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 18a0b67..303e177 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -43,6 +43,8 @@ struct rt2800_ops {
const unsigned int offset,
const struct rt2x00_field32 field, u32 *reg);
+ void (*read_eeprom)(struct rt2x00_dev *rt2x00dev);
+
int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len);
int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
@@ -114,6 +116,13 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
}
+static inline void rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
+
+ rt2800ops->read_eeprom(rt2x00dev);
+}
+
static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
@@ -191,9 +200,8 @@ void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev);
void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev);
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev);
void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
u16 *iv16);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 0965540..abfc876 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -47,13 +47,6 @@
#include "rt2800.h"
#include "rt2800pci.h"
-/*
- * Allow hardware encryption to be disabled.
- */
-static bool modparam_nohwcrypt = false;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-
static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
{
unsigned int i;
@@ -965,85 +958,14 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
/*
* Device probe functions.
*/
-static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
- /*
- * Read EEPROM into buffer
- */
if (rt2x00_is_soc(rt2x00dev))
rt2800pci_read_eeprom_soc(rt2x00dev);
else if (rt2800pci_efuse_detect(rt2x00dev))
rt2800pci_read_eeprom_efuse(rt2x00dev);
else
rt2800pci_read_eeprom_pci(rt2x00dev);
-
- return rt2800_validate_eeprom(rt2x00dev);
-}
-
-static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
-{
- int retval;
- u32 reg;
-
- /*
- * Allocate eeprom data.
- */
- retval = rt2800pci_validate_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2800_init_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * Enable rfkill polling by setting GPIO direction of the
- * rfkill switch GPIO pin correctly.
- */
- rt2x00pci_register_read(rt2x00dev, GPIO_CTRL, ®);
- rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
- rt2x00pci_register_write(rt2x00dev, GPIO_CTRL, reg);
-
- /*
- * Initialize hw specifications.
- */
- retval = rt2800_probe_hw_mode(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * This device has multiple filters for control frames
- * and has a separate filter for PS Poll frames.
- */
- __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
- /*
- * This device has a pre tbtt interrupt and thus fetches
- * a new beacon directly prior to transmission.
- */
- __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
-
- /*
- * This device requires firmware.
- */
- if (!rt2x00_is_soc(rt2x00dev))
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
- if (!modparam_nohwcrypt)
- __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
-
- /*
- * Set the rssi offset.
- */
- rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
-
- return 0;
}
static const struct ieee80211_ops rt2800pci_mac80211_ops = {
@@ -1081,6 +1003,7 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
.register_multiread = rt2x00pci_register_multiread,
.register_multiwrite = rt2x00pci_register_multiwrite,
.regbusy_read = rt2x00pci_regbusy_read,
+ .read_eeprom = rt2800pci_read_eeprom,
.drv_write_firmware = rt2800pci_write_firmware,
.drv_init_registers = rt2800pci_init_registers,
.drv_get_txwi = rt2800pci_get_txwi,
@@ -1093,7 +1016,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.tbtt_tasklet = rt2800pci_tbtt_tasklet,
.rxdone_tasklet = rt2800pci_rxdone_tasklet,
.autowake_tasklet = rt2800pci_autowake_tasklet,
- .probe_hw = rt2800pci_probe_hw,
+ .probe_hw = rt2800_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800_check_firmware,
.load_firmware = rt2800_load_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5390632..dd0a41c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -43,13 +43,6 @@
#include "rt2800usb.h"
/*
- * Allow hardware encryption to be disabled.
- */
-static bool modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-
-/*
* Queue handlers.
*/
static void rt2800usb_start_queue(struct data_queue *queue)
@@ -722,73 +715,27 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
/*
* Device probe functions.
*/
-static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
if (rt2800_efuse_detect(rt2x00dev))
rt2800_read_eeprom_efuse(rt2x00dev);
else
rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
EEPROM_SIZE);
-
- return rt2800_validate_eeprom(rt2x00dev);
}
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
- u32 reg;
- /*
- * Allocate eeprom data.
- */
- retval = rt2800usb_validate_eeprom(rt2x00dev);
+ retval = rt2800_probe_hw(rt2x00dev);
if (retval)
return retval;
- retval = rt2800_init_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * Enable rfkill polling by setting GPIO direction of the
- * rfkill switch GPIO pin correctly.
- */
- rt2x00usb_register_read(rt2x00dev, GPIO_CTRL, ®);
- rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
- rt2x00usb_register_write(rt2x00dev, GPIO_CTRL, reg);
-
- /*
- * Initialize hw specifications.
- */
- retval = rt2800_probe_hw_mode(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * This device has multiple filters for control frames
- * and has a separate filter for PS Poll frames.
- */
- __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
- /*
- * This device requires firmware.
- */
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
- if (!modparam_nohwcrypt)
- __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
-
- rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout,
-
/*
- * Set the rssi offset.
+ * Set txstatus timer function.
*/
- rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+ rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout;
/*
* Overwrite TX done handler
@@ -834,6 +781,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = {
.register_multiread = rt2x00usb_register_multiread,
.register_multiwrite = rt2x00usb_register_multiwrite,
.regbusy_read = rt2x00usb_regbusy_read,
+ .read_eeprom = rt2800usb_read_eeprom,
.drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
.drv_get_txwi = rt2800usb_get_txwi,
--
1.7.11.1
next prev parent reply other threads:[~2012-08-31 17:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-31 17:22 [PATCH v2 0/6] GPIO related fixes and clean ups Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 1/6] rt2x00: Identify ASUS USB-N53 device Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 2/6] rt2x00: Fix word size of rt2500usb MAC_CSR19 register Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 3/6] rt2x00: Fix rfkill polling prior to interface start Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 4/6] rt2x00: Align GPIO register definitions with the datasheets Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 5/6] rt2x00: Unify GPIO register field namings Gertjan van Wingerde
2012-08-31 17:22 ` Gertjan van Wingerde [this message]
2012-09-02 20:44 ` [PATCH v2 6/6] rt2x00: rt2800 - Make probe_hw function common between PCI and USB Ivo Van Doorn
2012-09-03 1:23 ` Gertjan van Wingerde
2012-09-02 20:40 ` [PATCH v2 5/6] rt2x00: Unify GPIO register field namings Ivo Van Doorn
2012-09-02 20:39 ` [PATCH v2 4/6] rt2x00: Align GPIO register definitions with the datasheets Ivo Van Doorn
2012-09-02 20:39 ` [PATCH v2 3/6] rt2x00: Fix rfkill polling prior to interface start Ivo Van Doorn
2012-09-02 20:37 ` [PATCH v2 2/6] rt2x00: Fix word size of rt2500usb MAC_CSR19 register Ivo Van Doorn
2012-09-02 20:37 ` [PATCH v2 1/6] rt2x00: Identify ASUS USB-N53 device Ivo Van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346433734-3337-7-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=IvDoorn@gmail.com \
--cc=helmut.schaa@googlemail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.