From: Ashish Jangam <ashish.jangam@kpitcummins.com>
To: Grant Likely <grant.likely@secretlab.ca>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
linux-input@vger.kernel.org, David Dajun Chen <dchen@diasemi.com>
Subject: [Patch v1 4/7] DA9055 GPIO driver
Date: Fri, 14 Sep 2012 19:00:16 +0530 [thread overview]
Message-ID: <1347629416.18587.15.camel@dhruva> (raw)
This is the GPIO patch for the DA9055 PMIC. This patch has got
dependency on the DA9055 MFD core.
This patch is functionally tested on SMDK6410 board.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
drivers/gpio/Kconfig | 11 +++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-da9055.c | 204 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 216 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpio/gpio-da9055.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b16c8a7..0b0d884 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -86,6 +86,17 @@ config GPIO_DA9052
help
Say yes here to enable the GPIO driver for the DA9052 chip.
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
config GPIO_MAX730X
tristate
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 153cace..23d9d13 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
new file mode 100644
index 0000000..55d83c7
--- /dev/null
+++ b/drivers/gpio/gpio-da9055.c
@@ -0,0 +1,204 @@
+/*
+ * GPIO Driver for Dialog DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_VDD_IO 0x0
+#define DA9055_PUSH_PULL 0x3
+#define DA9055_ACT_LOW 0x0
+#define DA9055_GPI 0x1
+#define DA9055_PORT_MASK 0x3
+#define DA9055_PORT_SHIFT(offset) (4 * (offset % 2))
+
+#define DA9055_INPUT DA9055_GPI
+#define DA9055_OUTPUT DA9055_PUSH_PULL
+#define DA9055_IRQ_GPI0 3
+
+struct da9055_gpio {
+ struct da9055 *da9055;
+ struct gpio_chip gp;
+};
+
+static inline struct da9055_gpio *to_da9055_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct da9055_gpio, gp);
+}
+
+static int da9055_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ int gpio_direction = 0;
+ int ret;
+
+ /* Get GPIO direction */
+ ret = da9055_reg_read(gpio->da9055, (offset >> 1) + DA9055_REG_GPIO0_1);
+ if (ret < 0)
+ return ret;
+
+ gpio_direction = ret & (DA9055_PORT_MASK) << DA9055_PORT_SHIFT(offset);
+ gpio_direction >>= DA9055_PORT_SHIFT(offset);
+ switch (gpio_direction) {
+ case DA9055_INPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_STATUS_B);
+ if (ret < 0)
+ return ret;
+ break;
+ case DA9055_OUTPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_GPIO_MODE0_2);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret & (1 << offset);
+
+}
+
+static void da9055_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+
+ da9055_reg_update(gpio->da9055,
+ DA9055_REG_GPIO_MODE0_2,
+ 1 << offset,
+ value << offset);
+}
+
+static int da9055_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+
+ reg_byte = (DA9055_ACT_LOW | DA9055_GPI)
+ << DA9055_PORT_SHIFT(offset);
+
+ return da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+}
+
+static int da9055_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+ int ret;
+
+ reg_byte = (DA9055_VDD_IO | DA9055_PUSH_PULL)
+ << DA9055_PORT_SHIFT(offset);
+
+ ret = da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+ if (ret < 0)
+ return ret;
+
+ da9055_gpio_set(gc, offset, value);
+
+ return 0;
+}
+
+static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ struct da9055 *da9055 = gpio->da9055;
+
+ return regmap_irq_get_virq(da9055->irq_data,
+ DA9055_IRQ_GPI0 + offset);
+}
+
+static struct gpio_chip reference_gp __devinitdata = {
+ .label = "da9055-gpio",
+ .owner = THIS_MODULE,
+ .get = da9055_gpio_get,
+ .set = da9055_gpio_set,
+ .direction_input = da9055_gpio_direction_input,
+ .direction_output = da9055_gpio_direction_output,
+ .to_irq = da9055_gpio_to_irq,
+ .can_sleep = 1,
+ .ngpio = 3,
+ .base = -1,
+};
+
+static int __devinit da9055_gpio_probe(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio;
+ struct da9055_pdata *pdata;
+ int ret;
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+ if (gpio == NULL)
+ return -ENOMEM;
+
+ gpio->da9055 = dev_get_drvdata(pdev->dev.parent);
+ pdata = gpio->da9055->dev->platform_data;
+
+ gpio->gp = reference_gp;
+ if (pdata && pdata->gpio_base)
+ gpio->gp.base = pdata->gpio_base;
+
+ ret = gpiochip_add(&gpio->gp);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+ goto err_mem;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
+ return 0;
+
+err_mem:
+ return ret;
+}
+
+static int __devexit da9055_gpio_remove(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&gpio->gp);
+}
+
+static struct platform_driver da9055_gpio_driver = {
+ .probe = da9055_gpio_probe,
+ .remove = __devexit_p(da9055_gpio_remove),
+ .driver = {
+ .name = "da9055-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9055_gpio_init(void)
+{
+ return platform_driver_register(&da9055_gpio_driver);
+}
+subsys_initcall(da9055_gpio_init);
+
+static void __exit da9055_gpio_exit(void)
+{
+ platform_driver_unregister(&da9055_gpio_driver);
+}
+module_exit(da9055_gpio_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-gpio");
--
1.7.0.4
next reply other threads:[~2012-09-14 13:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 13:30 Ashish Jangam [this message]
2012-09-14 13:06 ` [Patch v1 4/7] DA9055 GPIO driver Laxman Dewangan
2012-09-14 14:13 ` Linus Walleij
2012-09-14 16:38 ` Mark Brown
2012-10-12 9:55 ` Ashish Jangam
2012-10-12 21:17 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347629416.18587.15.camel@dhruva \
--to=ashish.jangam@kpitcummins.com \
--cc=dchen@diasemi.com \
--cc=grant.likely@secretlab.ca \
--cc=linus.walleij@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.