From: Travis Garrison <travis@netviscom.com>
To: netfilter@vger.kernel.org
Subject: NAT Pool
Date: Tue, 23 Feb 2016 13:09:37 -0500 (EST) [thread overview]
Message-ID: <1348593641.674234.1456250977299.JavaMail.zimbra@netviscom.com> (raw)
I am working on setting up a new router for our network and im trying to figure out the NAT rules. We have several VLANs that we need to enable PAT on. The issue comes from that we have several public IP addresses that we would like to use in the PAT pool. How would we be able to go about this. We are not doing anything special like port forwarding or redirection.
Internal IP addresses:
192.168.0.0/24
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
192.168.4.0/24
192.168.5.0/24
192.168.6.0/24
192.168.7.0/24
....we have around 150 networks, using the 192, 172 and 10 ranges
Public IP ranges:
x.x.252.0/24
x.x.254.0/24
x.x.173.0/24
We are currently using a Cisco FWSM with a few PAT IP's setup but the issue is it will use 1:1 NAT until all Public IPs are used the PAT the rest to a single IP address. We would like to PAT to all addresses in a round-robin fashion.
Thank you
Travis Garrison
next reply other threads:[~2016-02-23 18:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-23 18:09 Travis Garrison [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-12-18 22:32 NAT pool Miguel Alejandro González
2012-12-18 22:58 ` Jan Engelhardt
2012-12-19 1:53 ` Miguel Alejandro González
2012-12-19 9:45 ` Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348593641.674234.1456250977299.JavaMail.zimbra@netviscom.com \
--to=travis@netviscom.com \
--cc=netfilter@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.