From: Lucas Stach <dev@lynxeye.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] tegra: nand: make ONFI detection work
Date: Fri, 28 Sep 2012 17:56:51 +0200 [thread overview]
Message-ID: <1348847811-4091-1-git-send-email-dev@lynxeye.de> (raw)
Add the missing bits to the Tegra NAND driver to make ONFI detection work
properly.
Also add it to the Tegra default config, as it seems to be a reasonable thing
to have it available on all boards that use any kind of NAND.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
drivers/mtd/nand/tegra_nand.c | 36 ++++++++++++++++++++++++++++++++++++
include/configs/tegra20-common.h | 1 +
2 Dateien ge?ndert, 37 Zeilen hinzugef?gt(+)
diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c
index 2c1b533..0d7ca5d 100644
--- a/drivers/mtd/nand/tegra_nand.c
+++ b/drivers/mtd/nand/tegra_nand.c
@@ -219,6 +219,34 @@ static uint8_t read_byte(struct mtd_info *mtd)
}
/**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd MTD device structure
+ * @param buf buffer to store data to
+ * @param len number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i, s;
+ unsigned int reg;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_drv *info = (struct nand_drv *)chip->priv;
+
+ for (i = 0; i < len; i += 4) {
+ s = (len - i) > 4 ? 4 : len - i;
+ writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 |
+ ((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO,
+ &info->reg->command);
+ if (!nand_waitfor_cmd_completion(info->reg))
+ printf("Command timeout during read_buf\n");
+ reg = readl(&info->reg->resp);
+ memcpy(buf + i, ®, s);
+ }
+}
+
+/**
* Check NAND status to see if it is ready or not
*
* @param mtd MTD device structure
@@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
switch (command) {
case NAND_CMD_READID:
writel(NAND_CMD_READID, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO
| CMD_RX |
((4 - 1) << CMD_TRANS_SIZE_SHIFT)
@@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
&info->reg->command);
info->pio_byte_index = 0;
break;
+ case NAND_CMD_PARAM:
+ writel(NAND_CMD_PARAM, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
+ writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0,
+ &info->reg->command);
+ break;
case NAND_CMD_READ0:
writel(NAND_CMD_READ0, &info->reg->cmd_reg1);
writel(NAND_CMD_READSTART, &info->reg->cmd_reg2);
@@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum)
nand->options = LP_OPTIONS;
nand->cmdfunc = nand_command;
nand->read_byte = read_byte;
+ nand->read_buf = read_buf;
nand->ecc.read_page = nand_read_page_hwecc;
nand->ecc.write_page = nand_write_page_hwecc;
nand->ecc.read_page_raw = nand_read_page_raw;
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 744dc59..9e60020 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -204,5 +204,6 @@
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
#endif /* __TEGRA20_COMMON_H */
--
1.7.11.4
next reply other threads:[~2012-09-28 15:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-28 15:56 Lucas Stach [this message]
2012-09-28 20:31 ` [U-Boot] [PATCH] tegra: nand: make ONFI detection work Stephen Warren
2012-09-28 22:35 ` Scott Wood
2012-09-29 11:20 ` Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348847811-4091-1-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.