From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH] drm/i915: extract intel_set_pipe_timings from crtc_mode_set
Date: Mon, 1 Oct 2012 18:10:53 -0300 [thread overview]
Message-ID: <1349125853-3674-1-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1348176967-4323-6-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Version 2: call intel_set_pipe_timings from both i9xx_crtc_mode_set
and ironlake_crtc_mode_set, instead of just ironlake, as requested by
Daniel Vetter.
The problem caused by calling this function from i9xx_crtc_mode_set
too is that now on i9xx we write to PIPESRC before writing to DSPSIZE
and DSPPOS. I could not find any evidence in our documentation that
this won't work, and the docs actually say the pipe registers should
be set before the plane registers.
Version 3: don't remove pipeconf bits on i9xx_crtc_mode_set.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 124 +++++++++++++++--------------------
1 file changed, 54 insertions(+), 70 deletions(-)
Still untested on i9xx.
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ed0dcea..6cf0d00 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4290,6 +4290,55 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
I915_WRITE(DPLL(pipe), dpll);
}
+static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe = intel_crtc->pipe;
+ uint32_t vsyncshift;
+
+ if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ /* the chip adds 2 halflines automatically */
+ adjusted_mode->crtc_vtotal -= 1;
+ adjusted_mode->crtc_vblank_end -= 1;
+ vsyncshift = adjusted_mode->crtc_hsync_start
+ - adjusted_mode->crtc_htotal / 2;
+ } else {
+ vsyncshift = 0;
+ }
+
+ if (INTEL_INFO(dev)->gen > 3)
+ I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
+
+ I915_WRITE(HTOTAL(pipe),
+ (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ I915_WRITE(HBLANK(pipe),
+ (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ I915_WRITE(HSYNC(pipe),
+ (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+ I915_WRITE(VTOTAL(pipe),
+ (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ I915_WRITE(VBLANK(pipe),
+ (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ I915_WRITE(VSYNC(pipe),
+ (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+ /* pipesrc controls the size that is scaled from, which should
+ * always be the user's requested size.
+ */
+ I915_WRITE(PIPESRC(pipe),
+ ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -4303,7 +4352,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dspcntr, pipeconf, vsyncshift;
+ u32 dspcntr, pipeconf;
bool ok, has_reduced_clock = false, is_sdvo = false;
bool is_lvds = false, is_tv = false, is_dp = false;
struct intel_encoder *encoder;
@@ -4438,40 +4487,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
pipeconf &= ~PIPECONF_INTERLACE_MASK;
if (!IS_GEN2(dev) &&
- adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
- /* the chip adds 2 halflines automatically */
- adjusted_mode->crtc_vtotal -= 1;
- adjusted_mode->crtc_vblank_end -= 1;
- vsyncshift = adjusted_mode->crtc_hsync_start
- - adjusted_mode->crtc_htotal/2;
- } else {
+ else
pipeconf |= PIPECONF_PROGRESSIVE;
- vsyncshift = 0;
- }
-
- if (!IS_GEN3(dev))
- I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
- I915_WRITE(HTOTAL(pipe),
- (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- I915_WRITE(HBLANK(pipe),
- (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- I915_WRITE(HSYNC(pipe),
- (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
-
- I915_WRITE(VTOTAL(pipe),
- (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- I915_WRITE(VBLANK(pipe),
- (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- I915_WRITE(VSYNC(pipe),
- (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
/* pipesrc and dspsize control the size that is scaled from,
* which should always be the user's requested size.
@@ -4480,8 +4501,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
((mode->vdisplay - 1) << 16) |
(mode->hdisplay - 1));
I915_WRITE(DSPPOS(plane), 0);
- I915_WRITE(PIPESRC(pipe),
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
I915_WRITE(PIPECONF(pipe), pipeconf);
POSTING_READ(PIPECONF(pipe));
@@ -5087,42 +5106,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
}
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
- /* the chip adds 2 halflines automatically */
- adjusted_mode->crtc_vtotal -= 1;
- adjusted_mode->crtc_vblank_end -= 1;
- I915_WRITE(VSYNCSHIFT(pipe),
- adjusted_mode->crtc_hsync_start
- - adjusted_mode->crtc_htotal/2);
- } else {
- I915_WRITE(VSYNCSHIFT(pipe), 0);
- }
-
- I915_WRITE(HTOTAL(pipe),
- (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- I915_WRITE(HBLANK(pipe),
- (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- I915_WRITE(HSYNC(pipe),
- (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
-
- I915_WRITE(VTOTAL(pipe),
- (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- I915_WRITE(VBLANK(pipe),
- (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- I915_WRITE(VSYNC(pipe),
- (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
-
- /* pipesrc controls the size that is scaled from, which should
- * always be the user's requested size.
- */
- I915_WRITE(PIPESRC(pipe),
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+ intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
ironlake_set_m_n(crtc, mode, adjusted_mode);
--
1.7.11.4
next prev parent reply other threads:[~2012-10-01 21:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-20 21:36 [PATCH 0/5] Rework ironlake_crtc_mode_set V2 Paulo Zanoni
2012-09-20 21:36 ` [PATCH 1/5] drm/i915: don't recheck for invalid pipe bpp Paulo Zanoni
2012-09-24 22:47 ` Rodrigo Vivi
2012-09-20 21:36 ` [PATCH 2/5] drm/i915: extract set_m_n from ironlake_crtc_mode_set Paulo Zanoni
2012-09-24 23:00 ` Rodrigo Vivi
2012-09-20 21:36 ` [PATCH 3/5] drm/i915: extract compute_dpll " Paulo Zanoni
2012-09-24 23:08 ` Rodrigo Vivi
2012-09-20 21:36 ` [PATCH 4/5] drm/i915: remove unused variables " Paulo Zanoni
2012-09-24 23:36 ` Rodrigo Vivi
2012-09-25 8:44 ` Daniel Vetter
2012-09-20 21:36 ` [PATCH 5/5] drm/i915: extract intel_set_pipe_timings from crtc_mode_set Paulo Zanoni
2012-09-24 23:53 ` Rodrigo Vivi
2012-10-01 21:10 ` Paulo Zanoni [this message]
2012-10-02 13:40 ` [PATCH] " Rodrigo Vivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349125853-3674-1-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.