All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <zonque@gmail.com>
To: alsa-devel@alsa-project.org
Cc: Matt Porter <mporter@ti.com>,
	"Hebbar, Gururaja" <gururaja.hebbar@ti.com>,
	broonie@opensource.wolfsonmicro.com, lrg@ti.com,
	Daniel Mack <zonque@gmail.com>
Subject: [PATCH 2/5] ALSA: ASoC: McASP: add support for clock dividers
Date: Thu,  4 Oct 2012 15:08:39 +0200	[thread overview]
Message-ID: <1349356122-14794-3-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1349356122-14794-1-git-send-email-zonque@gmail.com>

Add support for the internal clock dividers of the McASP driver.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Cc: Matt Porter <mporter@ti.com>
---
 sound/soc/davinci/davinci-mcasp.c | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 98f440a..1252bad 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -199,6 +199,7 @@
 #define ACLKXE		BIT(5)
 #define TX_ASYNC	BIT(6)
 #define ACLKXPOL	BIT(7)
+#define ACLKXDIV_MASK	0x1f
 
 /*
  * DAVINCI_MCASP_ACLKRCTL_REG Receive Clock Control Register Bits
@@ -207,6 +208,7 @@
 #define ACLKRE		BIT(5)
 #define RX_ASYNC	BIT(6)
 #define ACLKRPOL	BIT(7)
+#define ACLKRDIV_MASK	0x1f
 
 /*
  * DAVINCI_MCASP_AHCLKXCTL_REG - High Frequency Transmit Clock Control
@@ -215,6 +217,7 @@
 #define AHCLKXDIV(val)	(val)
 #define AHCLKXPOL	BIT(14)
 #define AHCLKXE		BIT(15)
+#define AHCLKXDIV_MASK	0xfff
 
 /*
  * DAVINCI_MCASP_AHCLKRCTL_REG - High Frequency Receive Clock Control
@@ -223,6 +226,7 @@
 #define AHCLKRDIV(val)	(val)
 #define AHCLKRPOL	BIT(14)
 #define AHCLKRE		BIT(15)
+#define AHCLKRDIV_MASK	0xfff
 
 /*
  * DAVINCI_MCASP_XRSRCTL_BASE_REG -  Serializer Control Register Bits
@@ -554,6 +558,32 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 	return 0;
 }
 
+static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+{
+	struct davinci_audio_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	switch (div_id) {
+	case 0:		/* MCLK divider */
+		mcasp_mod_bits(dev->base + DAVINCI_MCASP_AHCLKXCTL_REG,
+			       AHCLKXDIV(div - 1), AHCLKXDIV_MASK);
+		mcasp_mod_bits(dev->base + DAVINCI_MCASP_AHCLKRCTL_REG,
+			       AHCLKRDIV(div - 1), AHCLKRDIV_MASK);
+		break;
+
+	case 1:		/* BCLK divider */
+		mcasp_mod_bits(dev->base + DAVINCI_MCASP_ACLKXCTL_REG,
+			       ACLKXDIV(div - 1), ACLKXDIV_MASK);
+		mcasp_mod_bits(dev->base + DAVINCI_MCASP_ACLKRCTL_REG,
+			       ACLKRDIV(div - 1), ACLKRDIV_MASK);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int davinci_config_channel_size(struct davinci_audio_dev *dev,
 				       int channel_size)
 {
@@ -880,7 +910,7 @@ static const struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
 	.trigger	= davinci_mcasp_trigger,
 	.hw_params	= davinci_mcasp_hw_params,
 	.set_fmt	= davinci_mcasp_set_dai_fmt,
-
+	.set_clkdiv	= davinci_mcasp_set_clkdiv,
 };
 
 #define DAVINCI_MCASP_PCM_FMTS (SNDRV_PCM_FMTBIT_S8 | \
-- 
1.7.11.4

  parent reply	other threads:[~2012-10-04 13:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-04 13:08 [PATCH 0/5] McASP changes for more flexibility Daniel Mack
2012-10-04 13:08 ` [PATCH 1/5] ALSA: ASoC: enable 192KHz support for McASP Daniel Mack
2012-10-09  7:19   ` Mark Brown
2012-10-04 13:08 ` Daniel Mack [this message]
2012-10-04 13:08 ` [PATCH 3/5] ALSA: ASoC: McASP: add support for 24 bit samples Daniel Mack
2012-10-09  7:17   ` Mark Brown
2012-10-09  7:30     ` Daniel Mack
2012-10-04 13:08 ` [PATCH 4/5] ALSA: ASoC: McASP: make AHCLK direction configurable Daniel Mack
2012-10-09  7:21   ` Mark Brown
2012-10-04 13:08 ` [PATCH 5/5] ALSA: ASoC: McASP: set format parameters in dependence of the DAI format Daniel Mack
2012-10-09  7:21   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1349356122-14794-3-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=gururaja.hebbar@ti.com \
    --cc=lrg@ti.com \
    --cc=mporter@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.