From: Tom Zanussi <tom.zanussi@intel.com>
To: "Bodke, Kishore K" <kishore.k.bodke@intel.com>
Cc: "yocto@yoctoproject.org" <yocto@yoctoproject.org>
Subject: Re: [PATCH 1/3] [meta-intel] meta-intel/common:Add a new recipe for Zlib qat_mem Module.
Date: Fri, 19 Oct 2012 13:34:37 -0500 [thread overview]
Message-ID: <1350671677.1569.14.camel@empanada> (raw)
In-Reply-To: <D956029D25CF204F948EA0FB515E1EE233E6D804@ORSMSX105.amr.corp.intel.com>
Hi Kishore,
I've built these and they look ok as far as that goes.
But I'm wondering, which kernel did you test with and which kernel(s)
are these modules designed for i.e. will they work with all the kernels
supported for 1.3?
Tom
On Fri, 2012-10-19 at 13:28 -0500, Bodke, Kishore K wrote:
>
> >-----Original Message-----
> >From: Kamble, Nitin A
> >Sent: Friday, October 19, 2012 11:28 AM
> >To: Bodke, Kishore K; Zanussi, Tom; yocto@yoctoproject.org
> >Subject: RE: [PATCH 1/3] [meta-intel] meta-intel/common:Add a new recipe
> >for Zlib qat_mem Module.
> >
> >Hi Kishore,
> > Same here, if it is not used by multiple BSPs yet, then it should go in the BSP
> >specific layer.
> >
> Yes, these too will be used by both Crystal Forest and Rangely.
>
> Thanks
> Kishore.
>
> >Thanks,
> >Nitin
> >
> >
> >> -----Original Message-----
> >> From: Bodke, Kishore K
> >> Sent: Thursday, October 18, 2012 11:19 AM
> >> To: Zanussi, Tom; Kamble, Nitin A; yocto@yoctoproject.org
> >> Cc: Bodke, Kishore K
> >> Subject: [PATCH 1/3] [meta-intel] meta-intel/common:Add a new recipe for
> >> Zlib qat_mem Module.
> >>
> >> From: Kishore Bodke <kishore.k.bodke@intel.com>
> >>
> >> This adds a new recipe to build the Intel Quick Assist Technology Memory
> >> Management Module for Zlib.
> >>
> >> Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>
> >> ---
> >> .../zlib-qat-module/zlib-qat-module.bb | 52
> >> ++++++++++++++++++++
> >> .../zlib-qat-module/zlib_qat_module.patch | 43 ++++++++++++++++
> >> 2 files changed, 95 insertions(+)
> >> create mode 100644 common/recipes-core/zlib-qat-module/zlib-qat-
> >> module.bb
> >> create mode 100644 common/recipes-core/zlib-qat-module/zlib-qat-
> >> module/zlib_qat_module.patch
> >>
> >> diff --git a/common/recipes-core/zlib-qat-module/zlib-qat-module.bb
> >> b/common/recipes-core/zlib-qat-module/zlib-qat-module.bb
> >> new file mode 100644
> >> index 0000000..5ade06e
> >> --- /dev/null
> >> +++ b/common/recipes-core/zlib-qat-module/zlib-qat-module.bb
> >> @@ -0,0 +1,52 @@
> >> +SUMMARY="Zlib QAT_MEM Memory Management Module for Intel Quick
> >> Assist \
> >> +Technology"
> >> +DESCRIPTION="This software acelerates the data compression algorithm \
> >> +in the zlib software library via the Intel QuickAssist Technology \
> >> +implemented on Intel Communications Chipset 89xx Series based
> >> platforms."
> >> +
> >> +HOMEPAGE = "http://zlib.net/"
> >> +SECTION = "libs"
> >> +LICENSE = "Zlib & GPLv2 & BSD"
> >> +
> >> +LIC_FILES_CHKSUM = "file://${WORKDIR}/zlib-
> >> ${PV}/zlib.h;beginline=4;endline=23;md5=94d1b5a40dadd127f3351471727e6
> >> 6a9 \
> >> + file://${COMMON_LICENSE_DIR}/GPL-
> >> 2.0;md5=801f80980d171dd6425610833a22dbe6 \
> >> +
> >> file://${COMMON_LICENSE_DIR}/BSD;md5=3775480a712fc46a696476
> >> 78acb234cb"
> >> +PV = "1.2.7"
> >> +ZLIB_QAT_VERSION = "0.4.0-011"
> >> +
> >> +PR="r0"
> >> +
> >> +SRC_URI = "http://www.zlib.net/zlib-${PV}.tar.gz;name=zlib \
> >> + http://downloadmirror.intel.com/20294/eng/zlib-${PV}-
> >> qat.L.${ZLIB_QAT_VERSION}.tar.gz;name=zlib_qat \
> >> + file://zlib_qat_module.patch"
> >> +
> >> +SRC_URI[zlib.md5sum]="60df6a37c56e7c1366cca812414f7b85"
> >> +SRC_URI[zlib.sha256sum]="fa9c9c8638efb8cb8ef5e4dd5453e455751e1c530
> >> b1595eed466e1be9b7e26c5"
> >> +
> >> +SRC_URI[zlib_qat.md5sum]="88e4140f98d2f9e170bf473f20e1a8d4"
> >>
> >+SRC_URI[zlib_qat.sha256sum]="3c360878127f3930e64640ef5a5822719a5059
> >> 143326bb4c396645ae37b704a6"
> >> +
> >> +S = "${WORKDIR}/zlib-${PV}/contrib/qat/qat_mem"
> >> +
> >> +inherit module
> >> +export KERNEL_SOURCE_ROOT = "${STAGING_KERNEL_DIR}"
> >> +
> >> +do_patch() {
> >> + cd ${WORKDIR}/zlib-${PV}
> >> + patch -p0 < ${WORKDIR}/zlib-${PV}-
> >> qat.L.${ZLIB_QAT_VERSION}.patch
> >> +
> >> + cd ${WORKDIR}
> >> + patch -p1 < ${WORKDIR}/zlib_qat_module.patch
> >> +}
> >> +
> >> +do_compile() {
> >> + cd ${S}
> >> + oe_runmake KERNEL_CC="${KERNEL_CC}"
> >> +}
> >> +
> >> +do_install_append() {
> >> + install -m 0755 -d ${D}${bindir}
> >> + install -m 0755 ${S}/qat_mem_test ${D}${bindir}
> >> +}
> >> +
> >> +FILES_${PN} += "${bindir}/qat_mem_test"
> >> diff --git a/common/recipes-core/zlib-qat-module/zlib-qat-
> >> module/zlib_qat_module.patch b/common/recipes-core/zlib-qat-
> >> module/zlib-qat-module/zlib_qat_module.patch
> >> new file mode 100644
> >> index 0000000..a30f8b0
> >> --- /dev/null
> >> +++ b/common/recipes-core/zlib-qat-module/zlib-qat-
> >> module/zlib_qat_modul
> >> +++ e.patch
> >> @@ -0,0 +1,43 @@
> >> +Index: zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/Makefile
> >> +=========================================================
> >> ==========
> >> +--- zlib-qat-module-1.2.7-r0.orig/zlib-1.2.7/contrib/qat/qat_mem/Makefile
> >> 2012-10-16 13:53:10.258938722 -0700
> >> ++++ zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/Makefile
> >> 2012-10-16 13:59:18.174944864 -0700
> >> +@@ -59,13 +59,10 @@
> >> + #
> >> + #
> >> +
> >> +#########################################################
> >> ##############
> >> +##
> >> +-
> >> + MODULENAME := qat_mem
> >> +-KDIR := /lib/modules/$(shell uname -r)/build
> >> ++KDIR := $(KERNEL_SOURCE_ROOT)
> >> + PWD := $(shell pwd)
> >> +-
> >> +-CC := gcc -Wall -imacros /usr/src/kernels/$(shell uname -
> >> r)/include/linux/autoconf.h
> >> +-
> >> ++CC := $(KERNEL_CC) -Wall -imacros
> >> $(KERNEL_SOURCE_ROOT)/include/generated/autoconf.h
> >> + ifeq ($(KERNELRELEASE),)
> >> + all: $(MODULENAME)_test
> >> + all:
> >> +@@ -73,20 +70,15 @@
> >> + else
> >> + obj-m := $(MODULENAME).o
> >> + endif
> >> +-
> >> ++modules_install:
> >> ++ $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules_install
> >> + $(MODULENAME)_test: $(MODULENAME)_test.c
> >> + $(CC) -g -o $(MODULENAME)_test $(MODULENAME)_test.c
> >> +-
> >> +-
> >> + load:
> >> + insmod ./$(MODULENAME).ko
> >> +-
> >> + unload:
> >> + rmmod $(MODULENAME)
> >> +-
> >> + test: all
> >> + ./$(MODULENAME)_test
> >> +-
> >> + clean:
> >> + rm -f *.o *.ko Module.symvers modules.order *.mod.c .*.cmd
> >> +$(MODULENAME)_test
> >> +-
> >> --
> >> 1.7.9.5
>
next prev parent reply other threads:[~2012-10-19 18:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 18:19 [PATCH 0/3][meta-intel] Add zlib and openssl qat_mem module kishore.k.bodke
2012-10-18 18:19 ` [PATCH 1/3] [meta-intel] meta-intel/common:Add a new recipe for Zlib qat_mem Module kishore.k.bodke
2012-10-19 18:27 ` Kamble, Nitin A
2012-10-19 18:28 ` Bodke, Kishore K
2012-10-19 18:34 ` Tom Zanussi [this message]
2012-10-19 18:40 ` Bodke, Kishore K
2012-10-19 18:48 ` Tom Zanussi
2012-10-22 3:15 ` Bodke, Kishore K
2012-10-22 4:03 ` Tom Zanussi
2012-10-22 13:24 ` Tom Zanussi
2012-10-18 18:19 ` [PATCH 2/3][meta-intel] meta-intel/common: Add new recipe for libcrypto module kishore.k.bodke
2012-10-19 18:24 ` Kamble, Nitin A
2012-10-19 18:25 ` Bodke, Kishore K
2012-10-18 18:19 ` [PATCH 3/3] [meta-intel]meta-crystalforest: Add zlib-qat and openssl-qat module kishore.k.bodke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350671677.1569.14.camel@empanada \
--to=tom.zanussi@intel.com \
--cc=kishore.k.bodke@intel.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.