From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org, gustavo@padovan.org
Cc: sunnyk@codeaurora.org, marcel@holtmann.org,
andrei.emeltchenko.news@gmail.com
Subject: [PATCHv4 10/18] Bluetooth: Add logical link confirm
Date: Fri, 19 Oct 2012 14:34:01 -0700 [thread overview]
Message-ID: <1350682449-24818-11-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1350682449-24818-1-git-send-email-mathewm@codeaurora.org>
The logical link confirm callback is executed when the AMP controller
completes its logical link setup. During a channel move, a newly
formed logical link allows a move responder to send a move channel
response. A move initiator will send a move channel confirm. A
failed logical link will end the channel move and send an appropriate
response or confirm command indicating a failure.
If the channel is being created on an AMP controller, L2CAP
configuration is completed after the logical link is set up.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap_core.c | 124 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 116 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 69d43c9..0edc955 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3799,6 +3799,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
goto unlock;
}
+ chan->ident = cmd->ident;
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
chan->num_conf_rsp++;
@@ -4198,17 +4199,17 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn,
return 0;
}
-static void l2cap_send_move_chan_rsp(struct l2cap_conn *conn, u8 ident,
- u16 icid, u16 result)
+static void l2cap_send_move_chan_rsp(struct l2cap_chan *chan, u16 result)
{
struct l2cap_move_chan_rsp rsp;
- BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
+ BT_DBG("chan %p, result 0x%4.4x", chan, result);
- rsp.icid = cpu_to_le16(icid);
+ rsp.icid = cpu_to_le16(chan->dcid);
rsp.result = cpu_to_le16(result);
- l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_RSP, sizeof(rsp), &rsp);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_RSP,
+ sizeof(rsp), &rsp);
}
static void l2cap_send_move_chan_cfm(struct l2cap_chan *chan, u16 result)
@@ -4260,11 +4261,114 @@ static void __release_logical_link(struct l2cap_chan *chan)
/* Placeholder - release the logical link */
}
+static void l2cap_logical_fail(struct l2cap_chan *chan)
+{
+ /* Logical link setup failed */
+ if (chan->state != BT_CONNECTED) {
+ /* Create channel failure, disconnect */
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ l2cap_move_revert(chan);
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->move_state = L2CAP_MOVE_STABLE;
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_SUPP);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
+ chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
+ /* Remote has only sent pending or
+ * success responses, clean up
+ */
+ l2cap_move_revert(chan);
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->move_state = L2CAP_MOVE_STABLE;
+ }
+
+ /* Other amp move states imply that the move
+ * has already aborted
+ */
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
+ }
+
+ __release_logical_link(chan);
+}
+
+static void l2cap_logical_finish_create(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
+ struct l2cap_conf_rsp rsp;
+ u8 code;
+
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ code = l2cap_build_conf_rsp(chan, &rsp,
+ L2CAP_CONF_SUCCESS, 0);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CONF_RSP, code,
+ &rsp);
+ set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
+
+ if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
+ int err = 0;
+
+ set_default_fcs(chan);
+
+ err = l2cap_ertm_init(chan);
+ if (err < 0)
+ l2cap_send_disconn_req(chan->conn, chan, -err);
+ else
+ l2cap_chan_ready(chan);
+ }
+}
+
+static void l2cap_logical_finish_move(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ BT_DBG("move_state %d", chan->move_state);
+
+ switch (chan->move_state) {
+ case L2CAP_MOVE_WAIT_LOGICAL_COMP:
+ /* Move confirm will be sent after a success
+ * response is received
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
+ break;
+ case L2CAP_MOVE_WAIT_LOGICAL_CFM:
+ if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
+ chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
+ }
+ break;
+ default:
+ /* Move was not in expected state, free the channel */
+ __release_logical_link(chan);
+
+ chan->move_state = L2CAP_MOVE_STABLE;
+ }
+}
+
+/* Call with chan locked */
static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
u8 status)
{
- /* Placeholder */
- return;
+ BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
+
+ if (status) {
+ l2cap_logical_fail(chan);
+ } else if (chan->state != BT_CONNECTED) {
+ /* Ignore logical link if channel is on BR/EDR */
+ if (chan->local_amp_id)
+ l2cap_logical_finish_create(chan, hchan);
+ } else {
+ l2cap_logical_finish_move(chan, hchan);
+ }
}
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
@@ -4272,6 +4376,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_req *req = data;
+ struct l2cap_move_chan_rsp rsp;
struct l2cap_chan *chan;
u16 icid = 0;
u16 result = L2CAP_MR_NOT_ALLOWED;
@@ -4348,7 +4453,10 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
}
send_move_response:
- l2cap_send_move_chan_rsp(conn, cmd->ident, icid, result);
+ rsp.icid = cpu_to_le16(icid);
+ rsp.result = cpu_to_le16(result);
+ l2cap_send_cmd(conn, cmd->ident, L2CAP_MOVE_CHAN_RSP,
+ sizeof(rsp), &rsp);
if (chan)
l2cap_chan_unlock(chan);
--
1.7.12.3
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2012-10-19 21:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-19 21:33 [PATCHv4 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-19 21:33 ` [PATCHv4 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-10-19 21:33 ` [PATCHv4 02/18] Bluetooth: Add L2CAP create channel request handling Mat Martineau
2012-10-19 21:33 ` [PATCHv4 03/18] Bluetooth: Remove unnecessary intermediate function Mat Martineau
2012-10-19 21:33 ` [PATCHv4 04/18] Bluetooth: Lookup channel structure based on DCID Mat Martineau
2012-10-19 21:33 ` [PATCHv4 05/18] Bluetooth: Channel move request handling Mat Martineau
2012-10-19 21:33 ` [PATCHv4 06/18] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
2012-10-19 21:33 ` [PATCHv4 07/18] Bluetooth: Add move channel confirm handling Mat Martineau
2012-10-19 21:33 ` [PATCHv4 08/18] Bluetooth: Add state to hci_chan Mat Martineau
2012-10-19 21:34 ` [PATCHv4 09/18] Bluetooth: Move channel response Mat Martineau
2012-10-19 21:34 ` Mat Martineau [this message]
2012-10-23 18:53 ` [PATCHv4 10/18] Bluetooth: Add logical link confirm Marcel Holtmann
2012-10-23 19:27 ` Mat Martineau
2012-10-23 21:51 ` Marcel Holtmann
2012-10-19 21:34 ` [PATCHv4 11/18] Bluetooth: Add move confirm response handling Mat Martineau
2012-10-19 21:34 ` [PATCHv4 12/18] Bluetooth: Handle physical link completion Mat Martineau
2012-10-19 21:34 ` [PATCHv4 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
2012-10-19 21:34 ` [PATCHv4 14/18] Bluetooth: Do not send data during channel move Mat Martineau
2012-10-19 21:34 ` [PATCHv4 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
2012-10-19 21:34 ` [PATCHv4 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
2012-10-19 21:34 ` [PATCHv4 17/18] Bluetooth: Do not retransmit data during a channel move Mat Martineau
2012-10-19 21:34 ` [PATCHv4 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350682449-24818-11-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=andrei.emeltchenko.news@gmail.com \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=sunnyk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.