All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 09/18] drm/i915: convert PIPECONF to use transcoder instead of pipe
Date: Tue, 23 Oct 2012 18:29:59 -0200	[thread overview]
Message-ID: <1351024208-3489-10-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1351024208-3489-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

Because the PIPECONF register is actually part of the CPU transcoder,
not the CPU pipe.

Ideally we would also rename PIPECONF to TRANSCONF to remind people
that they should use the transcoder instead of the pipe, but let's
keep it like this for now since most Gens still name it PIPECONF.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c      |  5 ++++-
 drivers/gpu/drm/i915/i915_reg.h      |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 35 +++++++++++++++++++++++------------
 drivers/gpu/drm/i915/intel_sprite.c  |  4 +++-
 4 files changed, 31 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9628508..6036d21 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -122,7 +122,10 @@ static int
 i915_pipe_enabled(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE;
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
+
+	return I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_ENABLE;
 }
 
 /* Called from drm generic code, passed a 'crtc', which
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2628524..439ba3d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2721,7 +2721,7 @@
 #define   PIPE_12BPC				(3 << 5)
 
 #define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC)
-#define PIPECONF(pipe) _PIPE(pipe, _PIPEACONF, _PIPEBCONF)
+#define PIPECONF(tran) _TRANSCODER(tran, _PIPEACONF, _PIPEBCONF)
 #define PIPEDSL(pipe)  _PIPE(pipe, _PIPEADSL, _PIPEBDSL)
 #define PIPEFRAME(pipe) _PIPE(pipe, _PIPEAFRAMEHIGH, _PIPEBFRAMEHIGH)
 #define PIPEFRAMEPIXEL(pipe)  _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2f546e8..2d1f74c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1018,9 +1018,11 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
 
 	if (INTEL_INFO(dev)->gen >= 4) {
-		int reg = PIPECONF(pipe);
+		int reg = PIPECONF(cpu_transcoder);
 
 		/* Wait for the Pipe State to go off */
 		if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
@@ -1233,12 +1235,14 @@ void assert_pipe(struct drm_i915_private *dev_priv,
 	int reg;
 	u32 val;
 	bool cur_state;
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
 
 	/* if we need the pipe A quirk it must be always on */
 	if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
 		state = true;
 
-	reg = PIPECONF(pipe);
+	reg = PIPECONF(cpu_transcoder);
 	val = I915_READ(reg);
 	cur_state = !!(val & PIPECONF_ENABLE);
 	WARN(cur_state != state,
@@ -1756,6 +1760,8 @@ static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
 			      bool pch_port)
 {
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
 	int reg;
 	u32 val;
 
@@ -1775,7 +1781,7 @@ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
 		/* FIXME: assert CPU port conditions for SNB+ */
 	}
 
-	reg = PIPECONF(pipe);
+	reg = PIPECONF(cpu_transcoder);
 	val = I915_READ(reg);
 	if (val & PIPECONF_ENABLE)
 		return;
@@ -1799,6 +1805,8 @@ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
 			       enum pipe pipe)
 {
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
 	int reg;
 	u32 val;
 
@@ -1812,7 +1820,7 @@ static void intel_disable_pipe(struct drm_i915_private *dev_priv,
 	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
 		return;
 
-	reg = PIPECONF(pipe);
+	reg = PIPECONF(cpu_transcoder);
 	val = I915_READ(reg);
 	if ((val & PIPECONF_ENABLE) == 0)
 		return;
@@ -4898,10 +4906,10 @@ static void haswell_set_pipeconf(struct drm_crtc *crtc,
 {
 	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
+	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 	uint32_t val;
 
-	val = I915_READ(PIPECONF(pipe));
+	val = I915_READ(PIPECONF(cpu_transcoder));
 
 	val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
 	if (dither)
@@ -4913,8 +4921,8 @@ static void haswell_set_pipeconf(struct drm_crtc *crtc,
 	else
 		val |= PIPECONF_PROGRESSIVE;
 
-	I915_WRITE(PIPECONF(pipe), val);
-	POSTING_READ(PIPECONF(pipe));
+	I915_WRITE(PIPECONF(cpu_transcoder), val);
+	POSTING_READ(PIPECONF(cpu_transcoder));
 }
 
 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
@@ -5388,7 +5396,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	WARN(num_connectors != 1, "%d connectors attached to pipe %c\n",
 	     num_connectors, pipe_name(pipe));
 
-	WARN_ON(I915_READ(PIPECONF(pipe)) &
+	WARN_ON(I915_READ(PIPECONF(intel_crtc->cpu_transcoder)) &
 		(PIPECONF_ENABLE | I965_PIPECONF_ACTIVE));
 
 	WARN_ON(I915_READ(DSPCNTR(plane)) & DISPLAY_PLANE_ENABLE);
@@ -8562,7 +8570,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 	u32 reg;
 
 	/* Clear any frame start delays used for debugging left by the BIOS */
-	reg = PIPECONF(crtc->pipe);
+	reg = PIPECONF(crtc->cpu_transcoder);
 	I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
 
 	/* We need to sanitize the plane -> pipe mapping first because this will
@@ -8718,7 +8726,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev)
 	for_each_pipe(pipe) {
 		crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
 
-		tmp = I915_READ(PIPECONF(pipe));
+		tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
 		if (tmp & PIPECONF_ENABLE)
 			crtc->active = true;
 		else
@@ -8912,6 +8920,7 @@ intel_display_capture_error_state(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_display_error_state *error;
+	enum transcoder cpu_transcoder;
 	int i;
 
 	error = kmalloc(sizeof(*error), GFP_ATOMIC);
@@ -8919,6 +8928,8 @@ intel_display_capture_error_state(struct drm_device *dev)
 		return NULL;
 
 	for_each_pipe(i) {
+		cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
+
 		error->cursor[i].control = I915_READ(CURCNTR(i));
 		error->cursor[i].position = I915_READ(CURPOS(i));
 		error->cursor[i].base = I915_READ(CURBASE(i));
@@ -8933,7 +8944,7 @@ intel_display_capture_error_state(struct drm_device *dev)
 			error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
 		}
 
-		error->pipe[i].conf = I915_READ(PIPECONF(i));
+		error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder));
 		error->pipe[i].source = I915_READ(PIPESRC(i));
 		error->pipe[i].htotal = I915_READ(HTOTAL(i));
 		error->pipe[i].hblank = I915_READ(HBLANK(i));
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 651b87f..0c2189e 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -423,6 +423,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	struct intel_framebuffer *intel_fb;
 	struct drm_i915_gem_object *obj, *old_obj;
 	int pipe = intel_plane->pipe;
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
 	int ret = 0;
 	int x = src_x >> 16, y = src_y >> 16;
 	int primary_w = crtc->mode.hdisplay, primary_h = crtc->mode.vdisplay;
@@ -437,7 +439,7 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	src_h = src_h >> 16;
 
 	/* Pipe must be running... */
-	if (!(I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE))
+	if (!(I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_ENABLE))
 		return -EINVAL;
 
 	if (crtc_x >= primary_w || crtc_y >= primary_h)
-- 
1.7.11.4

  parent reply	other threads:[~2012-10-23 20:30 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-23 20:29 [PATCH 00/18] Haswell eDP enablement v3 Paulo Zanoni
2012-10-23 20:29 ` [PATCH 01/18] drm/i915: fork a Haswell version of ironlake_crtc_{enable, disable} Paulo Zanoni
2012-10-24 13:15   ` Rodrigo Vivi
2012-10-25 11:03   ` Jani Nikula
2012-10-23 20:29 ` [PATCH 02/18] drm/i915: fix the checks inside Ironlake/Haswell crtc enable/disable Paulo Zanoni
2012-10-24 13:18   ` Rodrigo Vivi
2012-10-24 13:31   ` Paulo Zanoni
2012-10-23 20:29 ` [PATCH 03/18] drm/i915: simplify intel_crtc_driving_pch Paulo Zanoni
2012-10-25 11:13   ` Jani Nikula
2012-10-25 12:04     ` Paulo Zanoni
2012-10-25 12:37   ` Paulo Zanoni
2012-10-23 20:29 ` [PATCH 04/18] drm/i915: don't call Haswell PCH code when we can't or don't need Paulo Zanoni
2012-10-25 12:18   ` Jani Nikula
2012-10-23 20:29 ` [PATCH 05/18] drm/i915: add TRANSCODER_EDP Paulo Zanoni
2012-10-24 14:50   ` Lespiau, Damien
2012-10-24 16:33     ` Paulo Zanoni
2012-10-24 16:43       ` Daniel Vetter
2012-10-24 17:59   ` Paulo Zanoni
2012-10-25 10:23     ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 06/18] drm/i915: convert PIPE_CLK_SEL to transcoder Paulo Zanoni
2012-10-24 14:55   ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 07/18] drm/i915: convert DDI_FUNC_CTL " Paulo Zanoni
2012-10-24 15:12   ` Lespiau, Damien
2012-10-24 15:30   ` Lespiau, Damien
2012-10-24 16:44     ` Paulo Zanoni
2012-10-24 18:06   ` Paulo Zanoni
2012-10-25 10:24     ` Lespiau, Damien
2012-10-23 20:29 ` [PATCH 08/18] drm/i915: check TRANSCODER_EDP on intel_modeset_setup_hw_state Paulo Zanoni
2012-10-24 12:38   ` Daniel Vetter
2012-10-24 15:45     ` Lespiau, Damien
2012-10-24 15:50       ` Daniel Vetter
2012-10-24 18:09   ` Paulo Zanoni
2012-10-25 10:26     ` Lespiau, Damien
2012-10-23 20:29 ` Paulo Zanoni [this message]
2012-10-25 11:12   ` [PATCH 09/18] drm/i915: convert PIPECONF to use transcoder instead of pipe Lespiau, Damien
2012-10-23 20:30 ` [PATCH 10/18] drm/i915: convert PIPE_MSA_MISC to transcoder Paulo Zanoni
2012-10-25 11:09   ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 11/18] drm/i915: convert CPU M/N timings " Paulo Zanoni
2012-10-25 11:10   ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 12/18] drm/i915: convert pipe timing definitions " Paulo Zanoni
2012-10-25 11:12   ` Lespiau, Damien
2012-10-23 20:30 ` [PATCH 13/18] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP Paulo Zanoni
2012-10-23 20:44   ` Daniel Vetter
2012-10-24 13:34   ` Paulo Zanoni
2012-10-24 15:24     ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 14/18] drm/i915: select the correct pipe " Paulo Zanoni
2012-10-24 13:58   ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 15/18] drm/i915: set the correct eDP aux channel clock divider on DDI Paulo Zanoni
2012-10-24 14:07   ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 16/18] drm/i915: set/unset the DDI eDP backlight Paulo Zanoni
2012-10-24 14:11   ` Rodrigo Vivi
2012-10-24 14:22   ` Daniel Vetter
2012-10-24 14:43     ` Paulo Zanoni
2012-10-23 20:30 ` [PATCH 17/18] drm/i915: turn the eDP DDI panel on/off Paulo Zanoni
2012-10-24 15:20   ` Rodrigo Vivi
2012-10-23 20:30 ` [PATCH 18/18] drm/i915: enable DDI eDP Paulo Zanoni
2012-10-24 14:24   ` Rodrigo Vivi
2012-10-25 20:17     ` Daniel Vetter
2012-10-24 13:31 ` [PATCH 02-1/18] drm/i915: fix checks inside ironlake_crtc_{enable, disable} Paulo Zanoni
2012-10-24 13:32   ` [PATCH 02-2/18] drm/i915: fix checks inside haswell_crtc_{enable, disable} Paulo Zanoni
2012-10-25 11:07     ` Jani Nikula
2012-10-25 11:04   ` [PATCH 02-1/18] drm/i915: fix checks inside ironlake_crtc_{enable, disable} Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351024208-3489-10-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.