From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] ARM: dts: Add Calxeda ECX-2000 support
Date: Fri, 26 Oct 2012 13:43:05 -0500 [thread overview]
Message-ID: <1351276988-28382-4-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1351276988-28382-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
Separate out common dts pieces from highbank dts and add support for
Calxeda ECX-2000 (Midway) SOC.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
Documentation/devicetree/bindings/arm/calxeda.txt | 13 +-
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/ecx-2000.dts | 104 +++++++++
arch/arm/boot/dts/ecx-common.dtsi | 237 +++++++++++++++++++++
arch/arm/boot/dts/highbank.dts | 219 +------------------
5 files changed, 356 insertions(+), 220 deletions(-)
create mode 100644 arch/arm/boot/dts/ecx-2000.dts
create mode 100644 arch/arm/boot/dts/ecx-common.dtsi
diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt
index 4755caa..25fcf96 100644
--- a/Documentation/devicetree/bindings/arm/calxeda.txt
+++ b/Documentation/devicetree/bindings/arm/calxeda.txt
@@ -1,8 +1,15 @@
-Calxeda Highbank Platforms Device Tree Bindings
+Calxeda Platforms Device Tree Bindings
-----------------------------------------------
-Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
-properties.
+Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the
+following properties.
Required root node properties:
- compatible = "calxeda,highbank";
+
+
+Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following
+properties.
+
+Required root node properties:
+ - compatible = "calxeda,ecx-2000";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9f..5cc9566 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -24,7 +24,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos5250-smdk5250.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
+ ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
new file mode 100644
index 0000000..46477ac
--- /dev/null
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+ model = "Calxeda ECX-2000";
+ compatible = "calxeda,ecx-2000";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ clock-ranges;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clocks = <&a9pll>;
+ clock-names = "cpu";
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ clocks = <&a9pll>;
+ clock-names = "cpu";
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a15";
+ reg = <2>;
+ clocks = <&a9pll>;
+ clock-names = "cpu";
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a15";
+ reg = <3>;
+ clocks = <&a9pll>;
+ clock-names = "cpu";
+ };
+ };
+
+ memory at 0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
+ };
+
+ memory at 200000000 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
+ };
+
+ soc {
+ ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
+
+ timer {
+ compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ intc: interrupt-controller at fff11000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ interrupt-controller;
+ interrupts = <1 9 0xf04>;
+ reg = <0xfff11000 0x1000>,
+ <0xfff12000 0x1000>,
+ <0xfff14000 0x2000>,
+ <0xfff16000 0x2000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
+ };
+ };
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
new file mode 100644
index 0000000..d61b535
--- /dev/null
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/ {
+ chosen {
+ bootargs = "console=ttyAMA0";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+
+ sata at ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x10000>;
+ interrupts = <0 83 4>;
+ dma-coherent;
+ calxeda,port-phys = <&combophy5 0 &combophy0 0
+ &combophy0 1 &combophy0 2
+ &combophy0 3>;
+ };
+
+ sdhci at ffe0e000 {
+ compatible = "calxeda,hb-sdhci";
+ reg = <0xffe0e000 0x1000>;
+ interrupts = <0 90 4>;
+ clocks = <&eclk>;
+ status = "disabled";
+ };
+
+ memory-controller at fff00000 {
+ compatible = "calxeda,hb-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
+
+ ipc at fff20000 {
+ compatible = "arm,pl320", "arm,primecell";
+ reg = <0xfff20000 0x1000>;
+ interrupts = <0 7 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpioe: gpio at fff30000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff30000 0x1000>;
+ interrupts = <0 14 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpiof: gpio at fff31000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff31000 0x1000>;
+ interrupts = <0 15 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpiog: gpio at fff32000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff32000 0x1000>;
+ interrupts = <0 16 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpioh: gpio at fff33000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff33000 0x1000>;
+ interrupts = <0 17 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer at fff34000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfff34000 0x1000>;
+ interrupts = <0 18 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ rtc at fff35000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0xfff35000 0x1000>;
+ interrupts = <0 19 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ serial at fff36000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfff36000 0x1000>;
+ interrupts = <0 20 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ smic at fff3a000 {
+ compatible = "ipmi-smic";
+ device_type = "ipmi";
+ reg = <0xfff3a000 0x1000>;
+ interrupts = <0 24 4>;
+ reg-size = <4>;
+ reg-spacing = <4>;
+ };
+
+ sregs at fff3c000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0xfff3c000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333000>;
+ };
+
+ ddrpll: ddrpll {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x108>;
+ };
+
+ a9pll: a9pll {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x100>;
+ };
+
+ a9periphclk: a9periphclk {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-a9periph-clock";
+ clocks = <&a9pll>;
+ reg = <0x104>;
+ };
+
+ a9bclk: a9bclk {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-a9bus-clock";
+ clocks = <&a9pll>;
+ reg = <0x104>;
+ };
+
+ emmcpll: emmcpll {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x10C>;
+ };
+
+ eclk: eclk {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-emmc-clock";
+ clocks = <&emmcpll>;
+ reg = <0x114>;
+ };
+
+ pclk: pclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <150000000>;
+ };
+ };
+ };
+
+ dma at fff3d000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xfff3d000 0x1000>;
+ interrupts = <0 92 4>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ ethernet at fff50000 {
+ compatible = "calxeda,hb-xgmac";
+ reg = <0xfff50000 0x1000>;
+ interrupts = <0 77 4 0 78 4 0 79 4>;
+ dma-coherent;
+ };
+
+ ethernet at fff51000 {
+ compatible = "calxeda,hb-xgmac";
+ reg = <0xfff51000 0x1000>;
+ interrupts = <0 80 4 0 81 4 0 82 4>;
+ dma-coherent;
+ };
+
+ combophy0: combo-phy at fff58000 {
+ compatible = "calxeda,hb-combophy";
+ #phy-cells = <1>;
+ reg = <0xfff58000 0x1000>;
+ phydev = <5>;
+ };
+
+ combophy5: combo-phy at fff5d000 {
+ compatible = "calxeda,hb-combophy";
+ #phy-cells = <1>;
+ reg = <0xfff5d000 0x1000>;
+ phydev = <31>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index e39a79a..a9ae5d3 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -69,16 +69,8 @@
reg = <0x00000000 0xff900000>;
};
- chosen {
- bootargs = "console=ttyAMA0";
- };
-
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&intc>;
- ranges;
+ ranges = <0x00000000 0x00000000 0xffffffff>;
timer at fff10600 {
compatible = "arm,cortex-a9-twd-timer";
@@ -117,178 +109,6 @@
interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
};
- sata at ffe08000 {
- compatible = "calxeda,hb-ahci";
- reg = <0xffe08000 0x10000>;
- interrupts = <0 83 4>;
- calxeda,port-phys = <&combophy5 0 &combophy0 0
- &combophy0 1 &combophy0 2
- &combophy0 3>;
- dma-coherent;
- };
-
- sdhci at ffe0e000 {
- compatible = "calxeda,hb-sdhci";
- reg = <0xffe0e000 0x1000>;
- interrupts = <0 90 4>;
- clocks = <&eclk>;
- status = "disabled";
- };
-
- memory-controller at fff00000 {
- compatible = "calxeda,hb-ddr-ctrl";
- reg = <0xfff00000 0x1000>;
- interrupts = <0 91 4>;
- };
-
- ipc at fff20000 {
- compatible = "arm,pl320", "arm,primecell";
- reg = <0xfff20000 0x1000>;
- interrupts = <0 7 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- gpioe: gpio at fff30000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff30000 0x1000>;
- interrupts = <0 14 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- gpiof: gpio at fff31000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff31000 0x1000>;
- interrupts = <0 15 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- gpiog: gpio at fff32000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff32000 0x1000>;
- interrupts = <0 16 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- gpioh: gpio at fff33000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff33000 0x1000>;
- interrupts = <0 17 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- timer {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0xfff34000 0x1000>;
- interrupts = <0 18 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- rtc at fff35000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0xfff35000 0x1000>;
- interrupts = <0 19 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- serial at fff36000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0xfff36000 0x1000>;
- interrupts = <0 20 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- smic at fff3a000 {
- compatible = "ipmi-smic";
- device_type = "ipmi";
- reg = <0xfff3a000 0x1000>;
- interrupts = <0 24 4>;
- reg-size = <4>;
- reg-spacing = <4>;
- };
-
- sregs at fff3c000 {
- compatible = "calxeda,hb-sregs";
- reg = <0xfff3c000 0x1000>;
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <33333000>;
- };
-
- ddrpll: ddrpll {
- #clock-cells = <0>;
- compatible = "calxeda,hb-pll-clock";
- clocks = <&osc>;
- reg = <0x108>;
- };
-
- a9pll: a9pll {
- #clock-cells = <0>;
- compatible = "calxeda,hb-pll-clock";
- clocks = <&osc>;
- reg = <0x100>;
- };
-
- a9periphclk: a9periphclk {
- #clock-cells = <0>;
- compatible = "calxeda,hb-a9periph-clock";
- clocks = <&a9pll>;
- reg = <0x104>;
- };
-
- a9bclk: a9bclk {
- #clock-cells = <0>;
- compatible = "calxeda,hb-a9bus-clock";
- clocks = <&a9pll>;
- reg = <0x104>;
- };
-
- emmcpll: emmcpll {
- #clock-cells = <0>;
- compatible = "calxeda,hb-pll-clock";
- clocks = <&osc>;
- reg = <0x10C>;
- };
-
- eclk: eclk {
- #clock-cells = <0>;
- compatible = "calxeda,hb-emmc-clock";
- clocks = <&emmcpll>;
- reg = <0x114>;
- };
-
- pclk: pclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <150000000>;
- };
- };
- };
sregs at fff3c200 {
compatible = "calxeda,hb-sregs-l2-ecc";
@@ -296,40 +116,7 @@
interrupts = <0 71 4 0 72 4>;
};
- dma at fff3d000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xfff3d000 0x1000>;
- interrupts = <0 92 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- ethernet at fff50000 {
- compatible = "calxeda,hb-xgmac";
- reg = <0xfff50000 0x1000>;
- interrupts = <0 77 4 0 78 4 0 79 4>;
- dma-coherent;
- };
-
- ethernet at fff51000 {
- compatible = "calxeda,hb-xgmac";
- reg = <0xfff51000 0x1000>;
- interrupts = <0 80 4 0 81 4 0 82 4>;
- dma-coherent;
- };
-
- combophy0: combo-phy at fff58000 {
- compatible = "calxeda,hb-combophy";
- #phy-cells = <1>;
- reg = <0xfff58000 0x1000>;
- phydev = <5>;
- };
-
- combophy5: combo-phy at fff5d000 {
- compatible = "calxeda,hb-combophy";
- #phy-cells = <1>;
- reg = <0xfff5d000 0x1000>;
- phydev = <31>;
- };
};
};
+
+/include/ "ecx-common.dtsi"
--
1.7.10.4
next prev parent reply other threads:[~2012-10-26 18:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-26 18:43 [PATCH 0/6] Initial Calxeda ECX-2000 support Rob Herring
2012-10-26 18:43 ` [PATCH 1/6] ARM: highbank: disable unused sdhci and gpio in dts Rob Herring
2012-10-26 18:43 ` [PATCH 2/6] ARM: highbank: enable coherent DMA for xgmac " Rob Herring
2012-10-26 18:43 ` Rob Herring [this message]
2012-10-26 18:43 ` [PATCH 4/6] ARM: smp_twd: don't warn on no DT node Rob Herring
2012-10-26 18:43 ` [PATCH 5/6] ARM: highbank: abstract out SCU usage Rob Herring
2012-10-26 18:43 ` [PATCH 6/6] ARM: highbank: Add initial ECX-2000 support Rob Herring
2012-10-26 19:32 ` [PATCH 0/6] Initial Calxeda " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351276988-28382-4-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.