From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Viresh Kumar <viresh.linux@gmail.com>,
Vinod Koul <vinod.koul@intel.com>,
linux-kernel@vger.kernel.org,
spear-devel <spear-devel@list.st.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH 1/3] dmaengine: dw_dmac: add PCI part of the driver
Date: Tue, 30 Oct 2012 14:32:10 +0200 [thread overview]
Message-ID: <1351600332-29443-2-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1351600332-29443-1-git-send-email-andriy.shevchenko@linux.intel.com>
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Medfield.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/dma/Kconfig | 9 +++
drivers/dma/Makefile | 1 +
drivers/dma/dw_dmac_pci.c | 133 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 143 insertions(+)
create mode 100644 drivers/dma/dw_dmac_pci.c
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6761cc8..ae706ca 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -100,6 +100,15 @@ config DW_DMAC_BIG_ENDIAN_IO
If unsure, use the default setting.
+config DW_DMAC_PCI
+ tristate "Synopsys DesignWare AHB DMA support (PCI bus)"
+ depends on PCI
+ select DW_DMAC
+ help
+ Support the Synopsys DesignWare AHB DMA controller on the platfroms
+ that provide it as a PCI device. For example, Intel Medfield has
+ integrated this GPDMA controller.
+
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 7428fea..15eef5f 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_DW_DMAC_PCI) += dw_dmac_pci.o
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/dw_dmac_pci.c b/drivers/dma/dw_dmac_pci.c
new file mode 100644
index 0000000..043a963
--- /dev/null
+++ b/drivers/dma/dw_dmac_pci.c
@@ -0,0 +1,133 @@
+/*
+ * PCI driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2012 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/idr.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/dw_dmac.h>
+
+static struct dw_dma_platform_data dw_pci_pdata = {
+ .is_private = 1,
+ .chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
+ .chan_priority = CHAN_PRIORITY_ASCENDING,
+};
+
+static DEFINE_IDA(dw_pci_ida);
+
+static int __devinit dw_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pid)
+{
+ struct platform_device *pd;
+ struct resource r[2];
+ struct dw_dma_platform_data *driver = (void *)pid->driver_data;
+ int id, ret;
+
+ id = ida_simple_get(&dw_pci_ida, 0, 0, GFP_KERNEL);
+ if (id < 0)
+ return id;
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto put_id;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ goto err0;
+
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ goto err0;
+
+ pd = platform_device_alloc("dw_dmac", id);
+ if (!pd) {
+ dev_err(&pdev->dev, "can't allocate dw_dmac platform device\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ memset(r, 0, sizeof(r));
+
+ r[0].start = pci_resource_start(pdev, 0);
+ r[0].end = pci_resource_end(pdev, 0);
+ r[0].flags = IORESOURCE_MEM;
+
+ r[1].start = pdev->irq;
+ r[1].flags = IORESOURCE_IRQ;
+
+ ret = platform_device_add_resources(pd, r, ARRAY_SIZE(r));
+ if (ret) {
+ dev_err(&pdev->dev, "can't add resources to platform device\n");
+ goto err1;
+ }
+
+ ret = platform_device_add_data(pd, driver, sizeof(*driver));
+ if (ret)
+ goto err1;
+
+ dma_set_coherent_mask(&pd->dev, pdev->dev.coherent_dma_mask);
+ pd->dev.dma_mask = pdev->dev.dma_mask;
+ pd->dev.dma_parms = pdev->dev.dma_parms;
+ pd->dev.parent = &pdev->dev;
+
+ pci_set_drvdata(pdev, pd);
+
+ ret = platform_device_add(pd);
+ if (ret) {
+ dev_err(&pdev->dev, "platform_device_add failed\n");
+ goto err1;
+ }
+
+ return 0;
+
+err1:
+ platform_device_put(pd);
+err0:
+ pci_disable_device(pdev);
+put_id:
+ ida_simple_remove(&dw_pci_ida, id);
+ return ret;
+}
+
+static void __devexit dw_pci_remove(struct pci_dev *pdev)
+{
+ struct platform_device *pd = pci_get_drvdata(pdev);
+
+ platform_device_unregister(pd);
+ ida_simple_remove(&dw_pci_ida, pd->id);
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = {
+ { PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata },
+ { PCI_VDEVICE(INTEL, 0x0830), (kernel_ulong_t)&dw_pci_pdata },
+ { PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
+
+static struct pci_driver dw_pci_driver = {
+ .name = "dw_dmac_pci",
+ .id_table = dw_pci_id_table,
+ .probe = dw_pci_probe,
+ .remove = __devexit_p(dw_pci_remove),
+};
+
+module_pci_driver(dw_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare DMAC PCI driver");
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
--
1.7.10.4
next prev parent reply other threads:[~2012-10-30 14:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 12:32 [PATCH 0/3] dw_dmac: add PCI driver and move dw stuff to its own folder Andy Shevchenko
2012-10-30 12:32 ` Andy Shevchenko [this message]
2012-10-30 12:32 ` [PATCH 2/3] dma: move dw_dmac driver to an own directory Andy Shevchenko
2012-10-30 12:35 ` Felipe Balbi
2012-10-30 12:32 ` [PATCH 3/3] MAINTAINERS: add recently created files to dw_dmac section Andy Shevchenko
2012-10-30 13:38 ` viresh kumar
2012-10-30 13:47 ` [PATCH 0/3] dw_dmac: add PCI driver and move dw stuff to its own folder viresh kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351600332-29443-2-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=spear-devel@list.st.com \
--cc=vinod.koul@intel.com \
--cc=viresh.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.