From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 22/22] powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot
Date: Tue, 30 Oct 2012 18:37:09 -0500 [thread overview]
Message-ID: <1351640229.2530.15@snotra> (raw)
In-Reply-To: <6AE080B68D46FC4BA2D2769E68D765B70813CB90@039-SN2MPN1-023.039d.mgd.msft.net> (from B04825@freescale.com on Mon Oct 29 22:17:20 2012)
On 10/29/2012 10:17:20 PM, Tabi Timur-B04825 wrote:
> On Mon, Oct 29, 2012 at 9:05 PM, Scott Wood <scottwood@freescale.com>
> wrote:
>
> > diff --git a/include/configs/p1_p2_rdb_pc.h
> b/include/configs/p1_p2_rdb_pc.h
> > index ba7a364..f02ba2b 100644
> > --- a/include/configs/p1_p2_rdb_pc.h
> > +++ b/include/configs/p1_p2_rdb_pc.h
> > @@ -38,6 +38,7 @@
> > #define __SW_BOOT_MASK 0x03
> > #define __SW_BOOT_NOR 0xe4
> > #define __SW_BOOT_SD 0x54
> > +#define CONFIG_SYS_L2_SIZE (256 << 10)
>
> Shouldn't this be in config_mpc85xx.h?
Ideally yes, but we use the result later in the board-specific config
file, so it becomes a depedency mess. We can move it if we start
including config_mpc85xx.h from the board config file instead of later
on.
-Scott
next prev parent reply other threads:[~2012-10-30 23:37 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-22 0:01 [U-Boot] [RFC PATCH 00/17] Convert p1_p2_rdb_pc to new spl Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 01/17] Add u-boot-pad.bin target to the Makefile Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 02/17] spl: rename u-boot-pad.bin to u-boot-with-spl.bin Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 03/17] powerpc: remove .fixup test Scott Wood
2012-09-24 15:30 ` Peter Tyser
2012-09-24 18:47 ` Scott Wood
2012-09-24 23:38 ` Tom Rini
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 04/17] powerpc/mpc85xx: fix TLB alignment Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 05/17] powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 06/17] spl/mpc85xx: move udelay to cpu code Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 07/17] spl: include resetvec and lib8xxx Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 08/17] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL Scott Wood
2012-09-24 23:48 ` Tom Rini
2012-09-24 23:52 ` Scott Wood
2012-09-25 0:03 ` Tom Rini
2012-09-25 0:17 ` Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 09/17] spl/85xx: new SPL support Scott Wood
2012-09-24 23:51 ` Tom Rini
2012-09-24 23:54 ` Scott Wood
2012-09-25 0:04 ` Tom Rini
2012-09-25 0:08 ` Scott Wood
2012-09-25 0:13 ` Tom Rini
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 10/17] powerpc/p1_p2_rdb_pc: " Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 11/17] spl/nand: introduce CONFIG_SPL_NAND_MINIMAL Scott Wood
2012-09-24 23:55 ` Tom Rini
2012-09-25 0:02 ` Scott Wood
2012-09-25 0:13 ` Tom Rini
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 12/17] spl/nand: config symbol documentation Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 13/17] spl/nand: Add minimal-spl driver for Freescale eLBC NAND Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 14/17] spl: introduce CONFIG_SPL_TARGET Scott Wood
2012-09-22 0:12 ` Tom Rini
2012-09-24 18:54 ` Scott Wood
2012-09-24 19:03 ` Tom Rini
2012-09-24 20:05 ` Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 15/17] p1_p2_rdb_pc: convert from nand_spl to new spl Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 16/17] powerpc/mpc85xx/p2020rdb-pc: fix SPL DDR config Scott Wood
2012-09-22 0:01 ` [U-Boot] [RFC PATCH 17/17] ns16550: wait for TENT before initializing Scott Wood
2012-10-01 14:27 ` [U-Boot] [u-boot-release] " Timur Tabi
2012-09-22 0:13 ` [U-Boot] [RFC PATCH 00/17] Convert p1_p2_rdb_pc to new spl Tom Rini
2012-09-24 18:50 ` Scott Wood
2012-09-24 19:06 ` Tom Rini
2012-09-24 19:15 ` Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 00/22] " Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 01/22] serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONS Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 02/22] serial/ns16550: wait for TEMT before initializing Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state Scott Wood
2012-10-30 9:26 ` Prabhakar Kushwaha
2012-10-30 21:07 ` Scott Wood
2012-10-31 6:17 ` Prabhakar Kushwaha
2012-10-31 22:08 ` Scott Wood
2012-10-31 22:44 ` McClintock Matthew-B29882
[not found] ` <CAEsOVNeZAyH1nxfgnjPYUG4=7yxjF9rjsRWrpa=WYW8edfiM3Q@mail.gmail.com>
2012-10-31 22:45 ` McClintock Matthew-B29882
2012-10-31 22:51 ` Scott Wood
2012-11-16 2:12 ` Scott Wood
2012-11-26 20:53 ` Andy Fleming
2012-10-30 2:04 ` [U-Boot] [PATCH v2 04/22] powerpc/mpc85xx: add comma before "already enabled" Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 05/22] Add u-boot-pad.bin target to the Makefile Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 06/22] spl: rename u-boot-pad.bin to u-boot-with-spl.bin Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 07/22] spl: introduce CONFIG_SPL_TARGET Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 08/22] powerpc: change .fixup test to a GCC version test Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 09/22] powerpc/mpc85xx: fix TLB alignment Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 10/22] powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx Scott Wood
2012-10-30 2:04 ` [U-Boot] [PATCH v2 11/22] spl/mpc85xx: move udelay to cpu code Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 12/22] spl: include resetvec and lib8xxx Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 13/22] spl/mpc85xx: rename cpu_init_nand.c to spl_minimal.c Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 14/22] powerpc/mpc85xx: consistently use COBJS-y Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 15/22] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 16/22] spl/85xx: new SPL support Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 17/22] powerpc/mpc85xx/p1_p2_rdb_pc: " Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 18/22] spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 19/22] spl/nand: config symbol documentation Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 20/22] powerpc/mpc85xx/p1_p2_rdb_pc: convert from nand_spl to new spl Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 21/22] powerpc/mpc85xx/p1_p2_rdb_pc: clean up memory map Scott Wood
2012-10-30 2:05 ` [U-Boot] [PATCH v2 22/22] powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot Scott Wood
2012-10-30 3:17 ` Tabi Timur-B04825
2012-10-30 23:37 ` Scott Wood [this message]
2012-11-13 22:41 ` [U-Boot] [PATCH v3] " Scott Wood
2012-10-30 17:04 ` [U-Boot] [PATCH v2 00/22] Convert p1_p2_rdb_pc to new spl Tom Rini
2012-10-30 20:17 ` Scott Wood
2012-10-30 21:12 ` Tom Rini
2012-11-13 22:42 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351640229.2530.15@snotra \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.