All of lore.kernel.org
 help / color / mirror / Atom feed
From: valentin.longchamp@keymile.com (Valentin Longchamp)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: convert the km_kirkwood board to pinctrl
Date: Wed,  7 Nov 2012 17:13:12 +0100	[thread overview]
Message-ID: <1352304792-22443-3-git-send-email-valentin.longchamp@keymile.com> (raw)
In-Reply-To: <20121028165711.GG15824@lunn.ch>

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
---
 arch/arm/boot/dts/kirkwood-km_kirkwood.dts |   17 +++++++++++++++++
 arch/arm/mach-kirkwood/board-km_kirkwood.c |   11 -----------
 2 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 75bdb93..1d4b23a 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-98dx4122.dtsi"
 
 / {
 	model = "Keymile Kirkwood Reference Design";
@@ -16,6 +17,22 @@
 	};
 
 	ocp at f1000000 {
+		pinctrl: pinctrl at 10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda
+				&pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";	
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
 		serial at 12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
index f7d3283..58b2e07 100644
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -24,21 +24,10 @@ static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
-static unsigned int km_kirkwood_mpp_config[] __initdata = {
-	MPP8_GPIO,	/* I2C SDA */
-	MPP9_GPIO,	/* I2C SCL */
-	0
-};
-
 void __init km_kirkwood_init(void)
 {
 	struct clk *sata_clk;
 	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_mpp_conf(km_kirkwood_mpp_config);
-
-	/*
 	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
 	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
 	 * devices are also not present in this variant, their clocks get
-- 
1.7.1

      parent reply	other threads:[~2012-11-07 16:13 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-24 14:53 [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl Andrew Lunn
2012-10-24 14:53 ` [PATCH 1/9] ARM: Kirkwood: Convert TS219 " Andrew Lunn
2012-10-24 19:31   ` Thomas Petazzoni
2012-10-24 19:49     ` Sebastian Hesselbarth
2012-10-24 20:00       ` Thomas Petazzoni
2012-10-24 20:04         ` Andrew Lunn
2012-10-24 20:05           ` Thomas Petazzoni
2012-10-24 20:14         ` Sebastian Hesselbarth
2012-10-24 20:19           ` Thomas Petazzoni
2012-10-24 14:53 ` [PATCH 2/9] ARM: Kirkwood: Convert iConnect " Andrew Lunn
2012-10-24 14:53 ` [PATCH 3/9] ARM: Kirkwood: Convert dnskw " Andrew Lunn
2012-10-25 22:58   ` Jamie Lentin
2012-10-26  6:01     ` Andrew Lunn
2012-10-26  9:42       ` Jamie Lentin
2012-10-26 10:24         ` Andrew Lunn
2012-10-26 12:30           ` Jamie Lentin
2012-10-24 14:53 ` [PATCH 4/9] ARM: Kirkwood: Convert dockstar " Andrew Lunn
2012-10-24 14:53 ` [PATCH 5/9] ARM: Kirkwood: Convert dreamplug " Andrew Lunn
2012-10-24 14:53 ` [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net " Andrew Lunn
2012-10-26 17:28   ` Josh Coombs
2012-10-27  8:51     ` Andrew Lunn
2012-10-28 14:31   ` Josh Coombs
2012-10-24 14:53 ` [PATCH 7/9] ARM: Kirkwood: Convert ib62x0 " Andrew Lunn
2012-10-24 20:40   ` Simon Baatz
2012-10-24 14:53 ` [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards " Andrew Lunn
2012-10-24 20:37   ` Michael Walle
2012-10-28 16:40   ` Michael Walle
2012-10-24 14:53 ` [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 " Andrew Lunn
2012-10-24 20:04   ` Thomas Petazzoni
2012-10-24 20:20     ` Andrew Lunn
2012-10-24 20:29       ` Thomas Petazzoni
2012-10-24 15:29 ` [PATCH 0/9] ARM: Kirkwood: Convert " Josh Coombs
2012-10-24 15:35   ` Andrew Lunn
2012-10-24 19:26     ` Thomas Petazzoni
2012-10-24 18:06 ` Michael Walle
2012-10-24 20:01   ` Andrew Lunn
2012-10-24 20:47     ` Michael Walle
2012-10-24 21:33     ` Thomas Petazzoni
2012-10-25  5:46       ` Andrew Lunn
2012-10-25  6:28         ` Thomas Petazzoni
2012-10-25  7:39           ` Michael Walle
2012-10-25  7:43             ` Thomas Petazzoni
2012-10-25 20:19               ` Michael Walle
2012-10-26 18:06               ` Michael Walle
2012-10-26 18:45                 ` Thomas Petazzoni
2012-10-26 20:17                   ` Michael Walle
2012-10-27  8:59                     ` Andrew Lunn
2012-10-25 22:57           ` Jamie Lentin
2012-10-28 16:57 ` Andrew Lunn
2012-10-28 18:17   ` Michael Walle
2012-10-28 19:50   ` Simon Baatz
2012-10-28 20:01     ` Andrew Lunn
2012-10-28 21:06   ` Jamie Lentin
2012-10-31 22:38   ` Josh Coombs
2012-11-07 16:13   ` [RFC PATCH 0/2] Kirkwood 98dx4122 pinctrl variant Valentin Longchamp
2012-11-07 17:36     ` Andrew Lunn
2012-11-07 16:13   ` [PATCH 1/2] ARM: support 98DX412x kirkwoods with pinctrl Valentin Longchamp
2012-11-07 16:13   ` Valentin Longchamp [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1352304792-22443-3-git-send-email-valentin.longchamp@keymile.com \
    --to=valentin.longchamp@keymile.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.