From: AnilKumar Ch <anilkumar@ti.com>
To: dmitry.torokhov@gmail.com, grant.likely@secretlab.ca
Cc: rob.herring@calxeda.com, dgdunix@gmail.com,
linux-input@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
AnilKumar Ch <anilkumar@ti.com>
Subject: [PATCH v6] Input: matrix-keypad - Add device tree support
Date: Thu, 15 Nov 2012 16:12:59 +0530 [thread overview]
Message-ID: <1352976179-29790-1-git-send-email-anilkumar@ti.com> (raw)
Add device tree support to matrix keypad driver and usage details
are added to device tree documentation. Also modified the driver
according to recent update of matrix_keypad_build_keymap(), which
automatically allocate memory for keymap.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
This patch was tested on AM335x-EVM and based on linux-next, cleanly
applies on top of "input/next"
Changes from v5:
- Updated based on Dmitry's patch.
* Modified the driver acc. to matrix_keypad_build_keymap()
recent update.
* Combined row_gpios & col_gpios devm_kzalloc's to single
devm_kzalloc.
* Added proper return values for different failures in
matrix_keypad_parse_dt().
Changes from v4:
- Removed clustered-irq support through DT. This should be
added if any platform requires in the future.
Changes from v3:
- Incorporated Stephen Warren's review comments on v3
* Added description to clustered-irq-flags binding
Changes from v2:
- Incorporated Stephen Warren's review comments on v2
* Renamed the bindings file to gpio-matrix-keypad.txt
* Added description to clustered-irq binding
Changes from v1:
- Incorporated Rob's review comments on v1
* Changed matix-keypad compatible to gpio-matrix-keypad
* Removed unnecessary props (num of gpios)
* Used of_match_ptr()
- Removed first patch based on Dmitry's comments on v1
drivers/input/keyboard/matrix_keypad.c | 119 ++++++++++++++++++++++++++------
1 file changed, 97 insertions(+), 22 deletions(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 18b7237..05d3a96 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
struct matrix_keypad {
const struct matrix_keypad_platform_data *pdata;
@@ -37,8 +40,6 @@ struct matrix_keypad {
bool scan_pending;
bool stopped;
bool gpio_all_disabled;
-
- unsigned short keycodes[];
};
/*
@@ -118,6 +119,7 @@ static void matrix_keypad_scan(struct work_struct *work)
struct matrix_keypad *keypad =
container_of(work, struct matrix_keypad, work.work);
struct input_dev *input_dev = keypad->input_dev;
+ const unsigned short *keycodes = input_dev->keycode;
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
uint32_t new_state[MATRIX_MAX_COLS];
int row, col, code;
@@ -153,7 +155,7 @@ static void matrix_keypad_scan(struct work_struct *work)
code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev,
- keypad->keycodes[code],
+ keycodes[code],
new_state[col] & (1 << row));
}
}
@@ -394,33 +396,95 @@ static void matrix_keypad_free_gpio(struct matrix_keypad *keypad)
gpio_free(pdata->col_gpios[i]);
}
+#ifdef CONFIG_OF
+static struct matrix_keypad_platform_data * __devinit
+matrix_keypad_parse_dt(struct device *dev)
+{
+ struct matrix_keypad_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+ unsigned int *gpios;
+ int i;
+
+ if (!np) {
+ dev_err(dev, "device lacks DT data\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for platform data\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pdata->num_row_gpios = of_gpio_named_count(np, "row-gpios");
+ pdata->num_col_gpios = of_gpio_named_count(np, "col-gpios");
+ if (!pdata->num_row_gpios || !pdata->num_col_gpios) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_get_property(np, "linux,no-autorepeat", NULL))
+ pdata->no_autorepeat = true;
+ if (of_get_property(np, "linux,wakeup", NULL))
+ pdata->wakeup = true;
+ if (of_get_property(np, "gpio-activelow", NULL))
+ pdata->active_low = true;
+
+ of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms);
+ of_property_read_u32(np, "col-scan-delay-us",
+ &pdata->col_scan_delay_us);
+
+ gpios = devm_kzalloc(dev,
+ sizeof(unsigned int) *
+ (pdata->num_row_gpios + pdata->num_col_gpios),
+ GFP_KERNEL);
+ if (!gpios) {
+ dev_err(dev, "could not allocate memory for gpios\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ gpios[i] = of_get_named_gpio(np, "row-gpios", i);
+
+ for (i = 0; i < pdata->num_col_gpios; i++)
+ gpios[pdata->num_row_gpios + i] =
+ of_get_named_gpio(np, "col-gpios", i);
+
+ pdata->row_gpios = gpios;
+ pdata->col_gpios = &gpios[pdata->num_row_gpios];
+
+ return pdata;
+}
+#else
+static inline struct matrix_keypad_platform_data *
+matrix_keypad_parse_dt(struct device *dev)
+{
+ dev_err(dev, "no platform data defined\n");
+
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
static int __devinit matrix_keypad_probe(struct platform_device *pdev)
{
const struct matrix_keypad_platform_data *pdata;
- const struct matrix_keymap_data *keymap_data;
struct matrix_keypad *keypad;
struct input_dev *input_dev;
- unsigned int row_shift;
- size_t keymap_size;
int err;
- pdata = pdev->dev.platform_data;
+ pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
- }
-
- keymap_data = pdata->keymap_data;
- if (!keymap_data) {
+ pdata = matrix_keypad_parse_dt(&pdev->dev);
+ if (IS_ERR(pdata)) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return PTR_ERR(pdata);
+ }
+ } else if (!pdata->keymap_data) {
dev_err(&pdev->dev, "no keymap data defined\n");
return -EINVAL;
}
- row_shift = get_count_order(pdata->num_col_gpios);
- keymap_size = (pdata->num_row_gpios << row_shift) *
- sizeof(keypad->keycodes[0]);
- keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size,
- GFP_KERNEL);
+ keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!keypad || !input_dev) {
err = -ENOMEM;
@@ -429,7 +493,7 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
keypad->input_dev = input_dev;
keypad->pdata = pdata;
- keypad->row_shift = row_shift;
+ keypad->row_shift = get_count_order(pdata->num_col_gpios);
keypad->stopped = true;
INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
spin_lock_init(&keypad->lock);
@@ -440,12 +504,14 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
input_dev->open = matrix_keypad_start;
input_dev->close = matrix_keypad_stop;
- err = matrix_keypad_build_keymap(keymap_data, NULL,
+ err = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
pdata->num_row_gpios,
pdata->num_col_gpios,
- keypad->keycodes, input_dev);
- if (err)
+ NULL, input_dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
goto err_free_mem;
+ }
if (!pdata->no_autorepeat)
__set_bit(EV_REP, input_dev->evbit);
@@ -488,6 +554,14 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id matrix_keypad_dt_match[] = {
+ { .compatible = "gpio-matrix-keypad" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match);
+#endif
+
static struct platform_driver matrix_keypad_driver = {
.probe = matrix_keypad_probe,
.remove = __devexit_p(matrix_keypad_remove),
@@ -495,6 +569,7 @@ static struct platform_driver matrix_keypad_driver = {
.name = "matrix-keypad",
.owner = THIS_MODULE,
.pm = &matrix_keypad_pm_ops,
+ .of_match_table = of_match_ptr(matrix_keypad_dt_match),
},
};
module_platform_driver(matrix_keypad_driver);
--
1.7.9.5
next reply other threads:[~2012-11-15 10:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-15 10:42 AnilKumar Ch [this message]
2012-11-15 13:56 ` [PATCH v6] Input: matrix-keypad - Add device tree support Rob Herring
2012-11-15 14:11 ` AnilKumar, Chimata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352976179-29790-1-git-send-email-anilkumar@ti.com \
--to=anilkumar@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dgdunix@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-input@vger.kernel.org \
--cc=rob.herring@calxeda.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.