[U-Boot] [PATCH 4/4] spi: mxc_spi: Fix spi clock glitch durant reset

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@freescale.com>

Measuring the spi clock line on a scope shows a 'glitch' during the reset of the
spi. 

Fix this by toggling only the MXC_CSPICTRL_EN bit, so that the clock line becomes
always stable.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 drivers/spi/mxc_spi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 4bed4f0..102fca5 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -140,8 +140,8 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
 	reg_ctrl = reg_read(&regs->ctrl);
 
 	/* Reset spi */
-	reg_write(&regs->ctrl, 0);
-	reg_write(&regs->ctrl, (reg_ctrl | 0x1));
+	reg_write(&regs->ctrl, (reg_ctrl & ~MXC_CSPICTRL_EN));
+	reg_write(&regs->ctrl, (reg_ctrl | MXC_CSPICTRL_EN));
 
 	/*
 	 * The following computation is taken directly from Freescale's code.
-- 
1.7.9.5